• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.3
• /
• pp.267-273
• /
• 2013

In order to provide effective operating conditions for the fan in a wet cooling tower with film fill, a new program to search for the minimum fan power was developed using a model of the optimal total annual cost of the tower based on Merkel's model. In addition, a type of design map for a cooling tower was also developed. The inlet water temperature and heat load were considered as key parameters. The present program was first validated using several typical examples. The results showed that for a given heat load, a three-dimensional graph of the fan power (z-axis), mass flux of air (x-axis, minimum fan power), and inlet water temperature (y-axis, maximum of minimum fan power) showed a saddle configuration. The minimum fan power increased as the heat load increased. The conventionally known fact that the most effective cooling tower operation coincides with a high inlet water temperature and low air flow rate can be replaced by the statement that there exists an optimum mass flux of air corresponding to a minimum fan power for a given inlet water temperature, regardless of the heat load.

• Food Engineering Progress
• /
• v.13 no.1
• /
• pp.8-15
• /
• 2009

This study was investigated on optimal conditions of the functional activities of ${\beta}$-glucan which was extracted from rice bran (RB) and rice germ (RG) using response surface methodology. The extraction temperature was varied in the $80-100^{\circ}C$, the extraction time between 2-10 min, and the ethanol concentration was in the interval of 30-70%. A central composite design was applied to investigate the effects of independent variables of extraction temperature ($X_1$), extraction time ($X_2$) and ethanol concentration ($X_3$) on dependent variables such as electron donating ability of RB ($Y_1$), electron donating ability of RG ($Y_2$), total phenolics of RB ($Y_3$), total phenolics of RG ($Y_4$), ${\beta}$-glucan contents of RB ($Y_5$) and ${\beta}$-glucan contents of RG ($Y_6$). As a result, the highest $Y_1$ level was 84.02% at $92.60^{\circ}C$, 2.75 min and 60.41% in saddle point. This value was affected by extraction temperature (P<0.05). The value of $Y_2$ was found to be the highest at $87.52^{\circ}C$, 2.23 min and 54.40% in saddle point. The highest $Y_3$ level was $98.56^{\circ}C$, 6.69 min and 40.26% in saddle point, and this extraction was greatly influenced by extraction temperature (P<0.01) and ethanol concentration (P<0.05). The value of $Y_4$ was found to be highest at $95.73^{\circ}C$, 9.19 min and 53.67% in minimum point. The value of $Y_5$ was found to be the highest at $96.23^{\circ}C$, 7.70 min and 63.69% in saddle point. The value of $Y_6$ was found to be highest at $87.82^{\circ}C$, 2.10 min and 50.03% in minimum point, and this extraction was greatly influenced by extraction time (P<0.01).

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.247-250
• /
• 2000

This paper proposes a finger crease pattern identification algorithm utilizing a clustering method. The algorithms has been developed for the use of biometric person identification system. Since the finger crease pattern may be well-imaged utilizing low cost imaging devices such as low-end CCD camera with LED lighting, the feasibility of commercialization of the algorithm and the system utilizing the algorithm may be well justified if the finger crease pattern is a reasonable choice for the biometric feature. In this paper, we exploit this possibility and show the potential of using the finger crease pattern as a feature for biometric person identification.

• KSBB Journal
• /
• v.14 no.2
• /
• pp.255-258
• /
• 1999

Effects of growth conditions on the growth of Zoogloea ramigera and the production of zooglan were investigated. The production of zooglan was greatly reduced in the phosphate-limiting medium. $NH_4Cl$ and ${(NH_4)}_2SO_4$ improved cell growth when they were used as a nitrogen source. The medium containing 45 g/L of glucose and 27 g/L of $NaNO_3$ resulted in the highest production of zooglan at 18.5 g/L.

• Journal of the KSME
• /
• v.33 no.9
• /
• pp.803-810
• /
• 1993

벽면에서의 전단응력 분포와 유동장 내에서의 3차원 유동 요소를 추적하는 유동가시화 기법중 에서 몇 가지를 그 응용 예와 함께 살펴보았다. 3차원 유동의 주요 특징들과 한계유선(limiting streamlines)을 관찰하기 위해서는 oil and lampblack 기법이 충분하나 유속이 작거나 유동의 방향이 분명하지 않은 곳에서는 ink dot 기법을 적용하는 것이 좋다. Oil and lampblack 기법은 실험하고자 하는 유동의 조건에 따라 기름과 분말의 혼합비, 기름의 점도 등을 잘 선택하여야 한다. 안장점(Saddle point) 이나 재부착선(reattachment line)과 같이 성격상 중요한지점을 찾기 위해서는 털실 프로브(single tuft probe)가 유용하게 쓰이며, 이는 또 유동내에서 와동의 존재와 위치를 찾는데 쓰이기도 한다. 수치해석 결과 얻을 수 잇는 속도벡터와 같이 비교적 넓은 유동 장을 한눈에 관찰하기 위해서는 털실 격자망 (tuft grid)을 사용할 수 있으며 각 털실은 그 지 점세서의 유동의 방향과 그 안정성(steadiness)를 나타내준다. 이러한 유동가시화 방법들은 각 유동의 특성에 맞는 적절한 조건을 맞추기 위해서 많은 시행착오를 거쳐야 하며, 하나의 만족 스러운 결과를 얻기 위해서는 많은 기술과 시간과 연습을 요구하고 있어서 다른 정량적인 측정 기술과 더불어 커다란 노력과 관심을 기울여서 발전시켜야만 할 것이다.

• Microbiology and Biotechnology Letters
• /
• v.21 no.4
• /
• pp.306-309
• /
• 1993

Vegetable oils supplemented to the basal medicum stimulated mycelial growth of Flammulina velutipes. The mycelial yield was increased 3.5 folds by addition of 3% (v/v) ricebran oil. Maximum mycelial yield (18.2mg/ml) was obtained by addition of 3.0% ricebran oil with 1.0% $CaCl_2$ to the basal medium. There was no significant difference between the liquid and solid spawn in the yield of sporophores.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.853-861
• /
• 2007

To understand the concept of dynamic motion in two degree nonlinear coupled system, free vibration not including damping and excitation is investigated with the concept of nonlinear normal mode. Stability analysis of a coupled system is conducted, and the theoretical analysis performed for the bifurcation phenomenon in the system. Bifurcation point is estimated using harmonic balance method. When the bifurcation occurs, the saddle point is always found on Poincare's map. Nonlinear phenomenon result in amplitude modulation near the saddle point and the internal resonance in the system making continuous interchange of energy. If the bifurcation in the normal mode is local, the motion remains stable for a long time even when the total energy is increased in the system. On the other hand, if the bifurcation is global, the motion in the normal mode disappears into the chaos range as the range becomes gradually large.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11a
• /
• pp.236-241
• /
• 1996

울진 3,4호기 유출관계통의 과도현상을 평가하기 위해서 발전소 과도해석용 코드인 Modular Modeling System(MMS) 코드를 이용하여 수력학적 현상을 모사하고 유출관제어밸브 및 배압제어밸브의 특성, 이들 밸브들의 제어특성 및 밸브들의 운전특성등을 고려하여 분석을 수행하였다. 분석결과 배압제어밸브 제어기 제어변수의 적절한 선정이 계통의 과도현상에 매우 큰 영향을 미치고 있기 때문에 배압제어기 제어변수 선정이 계통의 과도현상 완화에 매우 중요한 인자임을 알 수 있었고, 배압제어밸브의 Stroke 속도변화가 유출관계통의 과도현상에 상당한 영향을 미치고 있음을 알았다. 또한 배압제어밸브의 특성에 따른 유출관계통의 과도현상을 분석한 결과 유출관제어밸브의 운전에 따라 배압제어밸브 특성이 결정됨을 알았다. 결과적으로 유출관계통의 과도상대를 적절하게 제어하기 위해서는 밸브의 특성, 밸브의 Stroke 속도 및 배압제어벨브 제어기 제어변수등의 적절한 선정이 필수적으로 계통설계단계에서 고려되어야 한다고 판단된다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.641-648
• /
• 2006

This study investigates which sound quality indices except SPL raise annoyance response. For investigation, auditory perception experiments for road traffic noise with identical linear SPL were performed by Paired Comparison Method. The numerical results of a Paired Comparison experiment express relative preference about annoyance. So that these relative preference scores are to be correlated to sound quality indices, which are absolute, a transformation is required to go from the relative domain to an absolute and linear scale of preference. The results of the transformation will be the 'merit values,' which quantifies the annoyance(in this case) of the road traffic noise on a linear scale. Using multiple regression, a formula is established that can calculate predicted merit values. Furthermore, This investigation offers a method selecting sound samples that represent various sound quality indices values to use experiment.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.372-377
• /
• 2005

EMC(Electromagnetic Compatibility) is the ability of an electronic device that operates properly in its intended electromagnetic environment and not be a source of pollution to that environment. The designer anticipates EMC problems at beginning of the process and finds remaining problems in early prototype stages, and tests the final prototypes for EMC as thoroughly as possible. This is a more cost-effective method. In this paper, it analyzes EMC problems that were appeared in actual measurement of electric power control device and presents reduction technique of these problems.