• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.2
• /
• pp.138-144
• /
• 2019

The purpose of this paper is to explore the fishing grounds of trawl fishery, which are operating in the waters around Jeju Island, and to investigate the monthly shifting changes of the explored fishing grounds. Information on AIS of fishing vessels operating near Jeju Island was collected and analyzed from October 16, 2016 to October 16, 2017. Thus, the location of fishing vessels with the same operational characteristics as those in this industry was extracted and displayed on Google Maps' location drawings to analyze the dense distribution of fishing vessels according to the frequency of their appearance. In the distribution of fishing vessels that appeared in October, a wide range of fishing grounds connecting the upper and lower waters of the 221 and 222 sea of fishing area was found to have gradually expanded and increased density, showing the widest range and highest density in December, and then gradually decreasing from January 2017 to near extinction in May. The distribution of fishing vessels that appeared in the left and lower waters of the 243 sea estuary increased not only in November and December, but also in the appearing sea areas gradually moved to the 242 sea and the range of their appearance was extended to the 241 sea. In other words, the highly dense fishing area in December indirectly shows that it is winter fishing grounds for these industries. The distribution of these dense fishing vessels gradually moved north and west with each passing day, reducing their density and reaching a near extinction in August. However, in September, the density was gradually restored again. Fishing vessels that appeared in high density in the northern waters of the 224 sea east of the Yeoseo island in December were thought to be fishing vessels, whose density decreased over time, almost disappeared in May, and reappeared in July and August, showing a certain degree of density, and then decreased again.

• Journal of Drive and Control
• /
• v.20 no.4
• /
• pp.71-79
• /
• 2023

In the field of agricultural machinery, various on-field tests are conducted to measure design load for optimal design of agricultural equipment. However, field test procedures are costly and time-consuming, and there are many constraints on field soil conditions due to weather, so research on utilizing simulation to overcome these shortcomings is needed. Therefore, this study aimed to model agricultural soils using discrete element method (DEM) software. To simulate draft force, predictions are made according to travel speed and compared to field test results to validate the prediction accuracy. The measured soil properties are used for DEM modeling. In this study, the soil property measurement procedure was designed to measure the physical and mechanical properties. DEM soil model calibration was performed using a virtual vane shear test instead of the repose angle test. The DEM simulation results showed that the prediction accuracy of the draft force was within 4.8% (2.16~6.71%) when compared to the draft force measured by the field test. In addition, it was confirmed that the result was up to 72.51% more accurate than those obtained through theoretical methods for predicting draft force. This study provides useful information for the DEM soil modeling process that considers the working speed from the perspective of agricultural machinery research and it is expected to be utilized in agricultural machinery design research.

• Journal of Drive and Control
• /
• v.21 no.2
• /
• pp.44-52
• /
• 2024

In this study, we predicted PTO power requirements based on torque predicted by the discrete element method and the multi-body dynamics coupling method. Six different scenarios were simulated to predict PTO power requirements in different soil conditions. The first scenario was a tillage operation on cohesionless soil, and the field was modeled using the Hertz-Mindlin contact model. In the second through sixth scenarios, tillage operations were performed on viscous soils, and the field was represented by the Hertz-Mindlin + JKR model for cohesion. To check the influence of surface energy, a parameter to reproduce cohesion, on the power requirement, a simple regression analysis was performed. The significance and appropriateness of the regression model were checked and found to be acceptable. The study findings are expected to be used in design optimization studies of agricultural machinery by predicting power requirements using the discrete element method and the multi-body dynamics coupling method and analyzing the effect of soil cohesion on the power requirement.

• Journal of Chest Surgery
• /
• v.30 no.2
• /
• pp.172-178
• /
• 1997

We present a etrospective analysis of arterial embolectomies performed at the Inje University Seoul Paik Hospital. During the period of March 1987 Feburary 1996 twenty-six patients underwent embolectomies, eighteen patients were male and eight patients were female, mean age of patients was 56.8 years. Rest pain was the chief complaint in 24 patients, the remaining two patients complained of long term history of claudication after recovery of acute symtoms. But only 10 patients had sensBrylmotor symtoms. Heart was the most common source of embolization and frequent predisposing factor of embolism was ischemic heart disease in 8 cases and valvular heart disease in 11 cases. The sites of embolization were upper extremities artery in 6 cases, saddle embolism in 2 cases, lower extremities artery in 18 cases and the most common site of embolism was femoral artery in 1 1 cases. Preoperative angiography was taken in the diagnosis and planning of the embolectomy in 1) patients while in the other patient p eoperative angiography was not taken. Only two cases were operated within the golden period of 6 hours and other cases were operated in more than 6 hours after embolization. In all patients, the Fogarty embolectomy catheter was used without bypass surgery via bachial ateriotomy in the embolism of upper extremities artery, bilateral groin approaches in the saddle embolism and transfemoral approach in the embolism of lower extremities artery. However 3 patients were re-operated via transpopliteal approach in the distal poplitiotibial embolism. Eighteen patients received perioperative anticoagulation therapy by heparin or fraxiparine and wafarin was used in 17 patients at the time of discharge and the indication of anticogulation was patients of valvular heat disease andfor atrial fibrillation, peripheral artery atherosclerosis and recurrent embolism. Postoperative results of the embolectomy were as follows: fouteen pateints had excellent results, five cases had symtom improvement after re-operation, B. K. amputation in 1 case who had severe atherosclerosis of lower extremities, recurrent embolism in 1 case and death in 2 cases the cause of death were acute renal failure and cerebral artery embolism, respectively. The complications of the embolectomy were reperfusion syndrome, pseudoaneurysm and intimal dissection in one case each. Conclusively the problems of embolism is delayed diagnosis and increasing number of old aged patient who had suffered from ischemic heart diease. Preoperative angiography was not always needed for embol ectomy. Selective anticoagulation therapy can decrease incidence of re-embolism. In the distal poplitiotibial embolism, embolectomy of tibial artery was difficult.

• KSBB Journal
• /
• v.14 no.3
• /
• pp.309-314
• /
• 1999

In order to produce high concentration of sodium gluconate, optimization of the fermentation conditions, such as glucose concentration, inoculum size, dissolved oxygen concentration and glucose feeding method, was examined. When the glucose concentration was maintained in the range of 30∼50 g/L during the batch fermentation, glucose conversion yield and productivity were 92.2% and 6.0 g/L/hr, respectively. In the case of the low concentration below 30 g/L, the yield decreased by about 25%. As the inoculum size increased above 20%(w/v), lag phase was shortened but the productivity decreased. The dissolved oxygen level of 60∼70% was shown to be the threshold point for 75% of increase in the productivity of sodium gluconate. Finally, optimal glucose feeding rate was determined using various feeding methods such as exponential feeding, feeding based on the average glucose consumption rate and was determined using various feeding methods such as exponential feeding, feeding based on the average glucose consumption rate and on the oxygen uptake rate and etc. Our result shows that glucose feeding, based on the oxygen uptake rate is a very simple, efficient and robust method, especially when oxygen is consumed as a substrate for the bioconversion. Using the above glucose feeding strategy under the optimized condition, 255 g/L of sodium gluconate concentration, 12 g/L/hr of productivity and 95% of glucose conversion yield were achieved with A. niger ACM53.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.4
• /
• pp.557-566
• /
• 2005

In preparation of steamed foam-cakes, effects of whipping time, amount of wheat flour, and amounts of emulsifier on physical properties of the steamed foam cakes were investigated using RSM (response surface methodology). The three independent variables selected for the RSM experiment were whipping time $(X_1)$, amount of wheat flour $(X_2)$, and amounts of wheat flour $(X_2)$, and concentration of emulsifier $(X_3)$ were set for single-stage mixing, respectively. A rotatable central composite design was used for treatment arrangement. The responses from the product for loaf volume, color values and textural properties were analysed. In the analysis of variance for the foam cakes prepared by single-stage method, significant interactions were observed between independent variables (experimental factors) and physical property like loaf volume (p<0.05); textural properties like hardness, gumminess, and chewiness (p<0.05). Among independent variables, concentration of emulsifier had the most effects on physical properties while whipping time. The ordinary points in surface response showed maximal points with physical property like colorimetric b value while other properties revealed saddle points. The 3-dimensional response surface graphs of the predicted regression models displayed decreasing loaf volumes with increasing whipping times and emulsifier concentrations beyond optimum levels. The optimum conditions for best loaf volume and textural property (hardness, gummimess and chewiness) of the products selected by extracting intersectional areas of the contour maps that commonly overlapped all characteristics were; $11\~13$ min whipping time, $470\~486\;g$ amount of wheat flour, and $19\~20\;g$ emulsifier concentration, in case of single-stage method. The median values extracted from the RSM experimental results for optimum manufacturing conditions for single-stage method, i.e., 12 min whipping time, 478 g amount of wheat flour, and 20 g emulsifier concentration were empirically proven to fit the predicted levels of physical properties from the final foam cakes.

• Journal of the Korean earth science society
• /
• v.21 no.4
• /
• pp.449-468
• /
• 2000

The Ordovician Chongson Limestone deposited in the carbonate ramp to the rimmed shelf shows diverse diagenetic features. The marine diagenetic feature appears as isopachous cements surrounding ooids and peloids. Meteoric diagenetic features are recrystallized finely and coarsely crystalline calcite, evaporite casts filled with calcite, and isopachous sparry calcite surrounding ooid grains. Shallow burial diagenetic features include wispy seam, microstylolite, and dissolution seam whereas deep burial features include stylolite, burial cements. blocky calcite with twin lamellae, and poikilotopic calcite. Dolomites consist of very finely to finely crystalline mosaic dolomite formed as supratidal dolomite, disseminated dolomite of diverse origin, patchy dolomite formed from bioturbated mottles, and saddle dolomite of burial origin. Silicified features include calcite-replacing quartz and fracture-filling megaquartz. Burial cements characterized by poikilotopic texture show ${\delta}^{18}$O value of -10.4 %$_o$ PDB, ${\delta}^{13}$C value of -1.0%$_o$ PDB and 504ppm Sr, 3643ppm Fe, and 152ppm Mn concentrations. Finely and coarsely crystalline limestones show similar ${\delta}^{18}$O and ${\delta}^{13}$C value to those of burial cements; however, they show lower Sr and higher Fe and Mn concentrations than burial cements. This suggests that very finely and coarsely crystalline limestones were recrystallized in freshwater and then they were readjusted geochemically in the burial setting whereas the burial cements were formed in relatively high temperature and low water/rock ratio conditions. Very finely and finely crystalline mosaic dolomites with ${\delta}^{18}$O value of -8.2%$_o$ PDB, ${\delta}^{13}$C value of -1.9 %$_o$ PDB, and 213ppm Sr, 3654ppm Fe, and 114ppm Mn concentrations, respectively are interpreted to have been formed penecontemporaneously in supratidal flat and then recrystallized in the low water/rock ratio burial environment. Geochemical data suggest that the low water/rock ratio burial environment was the dominant diagenetic setting in the Chongson Limestone. The Chongson Limestone has experienced marine and meteoric diagenesis during early diagenesis. With deposition of Haengmae and Hoedongri formations part of the Chongson Limestone was buried beneath these formations and it experienced shallow burial diagenesis. During the Devonian the Chongson Limestone was tectonically deformed and subaerially exposed. During the Carboniferous to the Permian about 3.3km thick Pyongan Supergroup was deposited on the Chongson Limestone and the Chongson Limestone was in deep burial depths and stylolite, burial cements, blocky calcite and saddle dolomite were formed. After this burial event the Chongson Limestone was subaerially exposed during the Mesozoic and Cenozoic by three periods of tectonic disturbance including Songnim, Daebo and Bulguksa disturbance. Since the Bulguksa disturbance during Cretaceous and early Tertiary the Chongson Limestone has been subaerially exposed.

• (The) Research of the performance art and culture
• /
• no.23
• /
• pp.281-312
• /
• 2011

The aim of this study is to examine various life conditions of actors of Joseon periods in unofficial historical stories. Yadam Literature(Korean unofficial historical stories) had been collected Sadaebu(the past Korean nobility and Confucian intelligentsia) among the people that stories had been handed down orally. and they had been wrote them. So Yadam Literature was heterozygous between the folk culture and the ruling class. And it was mixed and adapted legends and folktales, adding literary imagination. had a decisive role to cultivating novel that owed much to prosaic inspiration during A. D. 18~19. Besides, set a high value on excellent novel itself. Yadam Literature had a verisimilitude because it described a contemporary reality as it was founded on freely prosaic inspiration. In those days, so called Suchok and Seunggwangdae had performed Uhee(a comic theatrical performance) in Joseon periods. Suchok was the lowest class of people and Seunggwangdae was performing Buddhist monk in that time. Uhee had performed three kinds of comedies. One satirized and insinuated kings. Other satirized corrupt officials, too. Another had mimic everything. It is famous at that time as a king knew repertoire. Confucian scholars very were fond of Uhee in those ages. Because they favored a criticism of Uhee's satire. They thought that it gave people good lesson or instruction. Heri Bergson said that comic and Humor included lesson. At that time, those thought were universal in the world whether east or west. At any rate, I classify six kinds of types Uhee in Yadam Literature. First, satirizing and accusing corrupt officials. Second, an actor who use a satire in order to appeal secure a government position of his lord to a king. Third, shamans and actors who use a satire in order to appeal sufferings themselves to a king. Forth, actors and performing Buddhist monks that skillfully mimic anything. Fifth, describing actor's extremely miserable life. Sixth, wit and humor of actors. The contents of Uhee were various. Korean traditional actors adeptly dealt with aspects comic of wit, satire, humor, etc. Sometimes they used changeable transition them. By doing that, a great number of people enjoyed fully the sense of freedom. Korean traditional actors were the lowest class of people. They had lived extremely miserable life. But they had been exist as actions, interactions, and relationship in society those days. they were not only open to people, but also might foster community to peoples.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.1
• /
• pp.33-41
• /
• 1997

This study was carried out to establish simple and easy methods to judge the survival, senescence and death of the protoplasts in culture system by identifying the marker substance related to metabolic status of the cells. When rice and tobacco protoplasts were cultured in MS and KM-8P media containing 2,4-D or coconut milk ABA decreased especially in the media containing coconut milk, but GA$_3$, IAA and zeatin increased as the cultures progressed. The decrease of ABA and increase of zeatin was especially remarkable. When the supraoptimal amount of osmoticum (mannitol) was added to the culture media ABA decreased after a momentary increase, but other growth hormones slowly increased as the concentration of the osmoticum increased. Contents of individual hormones were contrasted when protoplasts rice and tobacco were cultured on the same medium containing 10mM super mine or NaCl. Tobacco protoplasts were more sensitive to NaCl stress and stopped protoplast division at the late stage of culture. Protoplast viability decreased greatly in 48 hours when the protoplast were at 32$^{\circ}C$ on a medium lacking several components. ABA content increased up to 10 days from incubation in negative proportion to the protoplast viability. On the other hand contents of other growth hormones, especially zeatin, decreased. The present results clearly showed that the contents of individual growth hormones in the plant protoplasts in culture varied sensitively in response to environmental factors that they are faced with. This indicates that the physiological states of the protoplast, such as survival, senescence or death can be simply judged based on the quantitative analysis of those hormones by ELISA.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.25 no.2
• /
• pp.70-74
• /
• 1989

This paper, described on the maneuverabilities of M.S. Cheju 402, the stern trawler (159 G.T.), training ship of Cheju National University which carried out the turning circle tests at helm angle 35$^{\circ}$ and 10$^{\circ}$, 20$^{\circ}$, 30$^{\circ}$Ztests of her. The results obtained were as follows; 1. The advances of the starboard and port turning circles were 79.1m, about 2.6 times of the length of the ship, and 81.4m, about 2.7 times of it, respectively. 2. The rates of speed reduction were about 0.49 together, and mean values of turning angular velocity of her at helm angle 35$^{\circ}$ into the starboard and port sides were 4.3$^{\circ}$/sec and 4$^{\circ}$/sec during the turning movement. 3. Overshoot angles of starboard side werelarger than those of port side at all Z tests, and mean values of them of the starboard and port sides at 10$^{\circ}$, 20$^{\circ}$, 30$^{\circ}$Z tests were 110.5$^{\circ}$ 20.5$^{\circ}$, 28.5$^{\circ}$ respectively. 4. The maneuvering indices K and T of experimental ship at 10$^{\circ}$, 20$^{\circ}$, 30$^{\circ}$, Z tests were 0.755 and 3.468, 0.566, and 1.621, and 0.481 and 1.547 respectively. Consequently, the experimental ship showed that her turning ability was more in effective as the helm angle was becomed larger and her obeying ability was more effective as it was becomed larger.