• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.2
• /
• pp.187-195
• /
• 2017

We have studied the efficient operation of the radar and the appropriateness of the installation location, when constructing the VTS system. As the Civil-Military Complex Harbour (Kangjeong Port) is completed in 2016, we set the control area within 10 nautical miles centering on Kangjeong Port, and found out and removed the operational radar blind area of VTS system to provide safe navigation information for vessels that navigating this area. Assuming that two international cruise ships entering at the same time, we performed the radar simulation and compared the images by considering the three sites of Kangjeong Port, Miaksan and Seoguipo Port. Simulation results for a single radar installed at Kangjung Port indicate that the blind area was largely affected by two large cruise ships and the surrounding islands. The blind area due to Kogunsan was considerably large when installed in Miaksan, but the blind area due to the influences of Beomseom, Moonseom and Seopseom was negligibly large. It seems that additional radar installation is necessary as a complementary solution to solve this blind area. When two radars were installed at Miaksan and Kangjeong Port, the residual blind area due to the Seopseom was $0.25km^2$ at 0.1~0.33 nautical miles in the southeast direction from Seopseom. In addition, the remaining blind area with two cruise ships mutually influenced was $0.18km^2$, which did not occur with a single cruise ship.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.2
• /
• pp.157-163
• /
• 2018

In the area around Jeju Island, the squid jigging fishery and the hair-tail angling are popular. Therefore, the study on the characteristics of the formation and shift of fishing grounds is very important. We have received and analyzed AIS data of all vessels around Jeju Island from October 16, 2016 to October 16, 2017, and extracted the positions of the fishing vessels with the same operational characteristics as the fishing vessels of their fisheries. The distribution chart of the frequency of fishing vessels appearing in each predefined fishing grid ($1NM{\times}1NM$) was analyzed. So we took a analogy with the monthly shift of fishing grounds. Many fishing vessels appeared in the seas around Jeju Island from November 2016 to January 2017, and the frequency of their appearance was maintained. In November, however, fishing vessels were mostly concentrated in coastal waters. Yet, the density gradually weakened as they moved into January. From February, the frequency itself began to decline, making it the worst in April. The high concentration of fishing vessels in the waters leading from Jeju Island's northwest coast to south coast in November is believed to be related to the yellowtail fishery that are formed annually in the coastal waters off the island of Marado. In May 2017, the appearance frequency of fishing vessels increased and began to show a concentration in coastal waters around Jeju Island. Fishing vessels began to flock in waters northwest of Jeju Island beginning in July and peaked in August, and by September, fishing vessels were moving south along the coast of Jeju Island, weakening the density and spreading out. Between July and August, fishing vessels were concentrated in waters surrounding Jeju Island, which is believed to be related to the operations of fishing vessels for the squid jigging fishery and the hair-tail angling.

• Korean journal of food and cookery science
• /
• v.25 no.2
• /
• pp.243-251
• /
• 2009

Changes in pH and acidity were investigated in kimchi containing different amounts of added onion and/or pear during fermentation at $10^{\circ}C$. As the fermentation period increase, the pH and sugar contents of the onion and/or pear kimchi were higher compared to the control kimchi. However, the acidity of the kimchi containing onion and/or pear was lower than that of the control. To enhance the acceptance of kimchi, the optimal conditions for the addition of onion and pear were evaluated with the central composite design, ANOVA, and response surface methodology. According to variations in the mixing ratio of onion and pear, smell, taste and overall acceptability differed significantly, but the appearance and texture were not different. The optimal levels of onion and pear, predicted on the basis of each corresponding sensory parameters for kimchi, were $4.55{\sim}5.00%$ and $0{\sim}0.30%$ for smell, 2.61% and 2.38% for taste and 2.78% and 2.57% for overall acceptability, respectively.

• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.320-325
• /
• 1997

Transglucosidase (TG) from Aspergillus niger was immobilized on various carriers by several immobilization methods such as ionic binding, adsorption, entrapment, covalent linkage and metal chelation to improve the process performance. The covalent linkage with CNBr-activated sepharose 4B was found as the best method for immobilization of TG based on the immobilization yield which was 61.3%. The immobilization through ionic binding and adsorption gave 33.1% and 22.5% yield respectively but both methods were not selected due to lower yield than covalent linkage using CNBr-Sepharose 4B. Internal diffusion resistance in beads developed by entrapment were not suitable factor in producing final target products. Covalent linkage of TG on magnesium silicate, silica gel and glass bead and metal chelation method didn't result in higher yield than the selected one, either.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.1
• /
• pp.87-95
• /
• 2012

In recent years, laser-arc hybrid welding has begun to be adopted for assembly welding of automotive bodies and parts, because the hybrid welding process can weld lapped steel sheets having a larger gap than is possible with laser welding. In this paper, to predict the twist deformation by the hybrid welding when brackets are welded in B pillar of a passenger car, the residual stress using CAE is analyzed and the deformation result of CAE is compared with the measured deformation. First of all, after modeling heat source as intended to be expressed with laser-arc hybrid welding method, heat source fitting is done with welding conditions and a section of welding part obtained through specimen test. In case of heat source functions, laser used conical source and arc used double ellipsoid source. Through the local model analysis, elements which are located in the center of the model are selected. The elements are called WME(Welding Macro Element). This WME is extruded in the welding lines and welding phenomenon of complex parts is accomplished. The deformation amount after hybrid welding is got through a simulation, the validity of simulation is verified by measuring the panel and comparing with the simulation result.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.3
• /
• pp.357-363
• /
• 2012

The purpose of this study was to investigate the effects of different saddle heights on lower-limb joint angle and muscle activity. Six elite cyclists(age: $32.2{\pm}5.2years$, height: $171.0{\pm}3.5cm$, weight: $79.7{\pm}5.6kg$, cycle career: $13{\pm}6.2years$) participated in three min. submaximal(90 rpm) pedaling tests with the same load and cadence based on saddle heights where subject's saddle height was determined by his knee flexion angle when the pedal crank was at the 6 o'clock position. Joint angles(hip, knee, ankle joints) and the activity of lower limb muscles(biceps femoris(BF), vastus lateralis(VL), tibialis anterior(TA) and gastrocnemius medial(GM)) were compared by measuring 3D motion and electromyography(EMG) data. Results showed that there were significant differences in minimum hip & knee joint angle and range of motion of hip and knee joint between saddle heights. Onset timing and integrated EMG of only BF among 4 muscles were significantly different between saddle heights. Especially there was a negative relationship between minimum hip joint angle and onset timing of BF in most subject, which means that onset timing of BF became fast as the degree of bending of the hip joint became larger by saddle height. Optimal pedaling will be possible through increased amount of muscle activation due to the appropriate burst onset timing by proper pedaling posture with adjusted saddle height.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.1
• /
• pp.83-88
• /
• 2011

The goal of this treatment is the surgical-orthodontic eruption of impacted permanent teeth associated with a large dentigerous cyst in a preadolescent patient. Although enucleation of the entire cyst and the extraction of impacted teeth are common treatments, missing permanent teeth cause several problems in young patients. In this report, an 11-year-old female visited with the chief complaint of a large radiolucent lesion from the mandibular anterior area to the left mandibular posterior area. The permanent left canine and premolars were displaced toward the mandibular inferior border area. The extraction of infected deciduous teeth and marsupialization were performed. After 4 months, orthodontic buttons for forced eruption were applied to the impacted permanent teeth. The teeth emerged into the oral cavity 3 months after the orthodontic treatment. Although the root form was abnormal, there were no other pathogenic signs. The alveolar bone had a normal trabecular pattern and the teeth appeared to be well maintained at postoperative 24 months.

• Clinical and Experimental Pediatrics
• /
• v.49 no.5
• /
• pp.565-569
• /
• 2006

Rothmund-Thomson syndrome (RTS), is a rare autosomal recessive disorder, characterized by : skin photosensitivity, poikiloderma, sparse hair, sparse eyebrows/lashes, short stature, skeletal abnormalities, cataracts, and an increased risk of malignancy. Skeletal abnormalities include : dysplasia, absent or malformed bones, such as absent radii, osteopenia, and delayed bone formation. RTS is thought to result from chromosomal instability, and children with RTS are at risk of cancer. Reported cancers in children with RTS include : basal cell carcinoma, squamous cell carcinoma of the skin and osteosarcoma of bone. We report an 11 year-old boy, who presented to our institution with poikilodermatous skin change with telangiectasia and hyperpigmentation, absence of radius and thumb, and the development of osteosarcoma of the left tibia. The patient is now receiving supportive care and is receiving maintenance chemotherapy after surgery for osteosarcoma.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.599-604
• /
• 2018

For missile systems, sustaining high reliability and ensuring economical maintenance are very important. In the Republic of Korea, for most missiles, periodic inspection is mandatory for missiles in the field. Every fixed number of years, they are returned to the ordnance depot to be tested and repaired if faults are found. Almost all missiles have a built-in test (BIT) capability. With the BIT, faulty missiles can be isolated anytime during operations or storage in the launchers. So the reliability and the maintenance costs of the missiles greatly depend on the length of the inspection cycle and the BIT/inspection quality. In this paper, we suggest a model for predicting the storage reliability of missiles subjected to non-periodic tests and periodic inspections, excluding overlapping failures. Some numerical examples are given. This model will be useful for determining the length of the periodic inspection cycle.

• Microbiology and Biotechnology Letters
• /
• v.17 no.2
• /
• pp.94-99
• /
• 1989

Seven gtrains of Lactobacillus produce bacteriocin being active for Lacidophilus. All strains producing bacteriocin were found to be L. acidophilus except with one strain of L. gasseri. The maximum activity of bacteriocin produced by Lactobacillus strains was obtained at a middle or late stage of the log phase, or a early stage of the stationary phase. After the maximum was reached, however, the activity was rapidly decreased. The bacteriocins were inactivated easily by the treatment with proteolytic enzymes but not with nucleolytic enzymes, suggesting that the bacteriocin was proteinaceous. The bacteriocins were different from the other previously reported lactobacillus bacteriocin in their flexibility to the treatment at 10$0^{\circ}C$. Bacteriocins of L. acidophilus ATCC 9857 and 4357 decreased in activity by the treatment with diethylether, presumably the bacteriocin contained of a lipid component. It sums likely that L. acidophilus A4 bacteriocin adsorb to a regularly arrayed layer of the cell wall.