• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.29 no.4
• /
• pp.219-225
• /
• 2003

Purpose: Platelet Rich Plasma(PRP) application is increasing with sinus inlay bone graft, but there is few research with radiographic ananlysis on effect of PRP in maxillary sinus. The author investigated the amount of bony changes of maxillary sinus for dental implantation among the patients with maxillary inlay graft. Materials and Methods: With 10 patients who were treated with sinus inlay autologous bone grafting combined with PRP technique, and with 5 patients who were treated with sinus inlay grafting only without PRP, the panoramic radiographys which were taken at preoperation, immediate postoperation, 3months postoperation, and 4 months postoperation(a month after dental implantation)periods were analysed. The films had been scanned, and then proceeded throughout image analysis system. The bone density of maxillary grafted sites was compared with adjacent tooth enamel density and remeasured according to density luminosity of each film. The density changes on PRP group and bone graft only group were analysed with non-parameteric statistics method. Results: In PRP combined patients group, bone density on postoperation periods was increased totally. The remarkable enhanced change of bone density was observed on 3 months postoperation period, thereafter the increasing rate was slightly reduced. In only bone graft patients group, bone density on postoperation periods was also increased compared with preoperation period, but the bone density of 4 months postoperation period was decreased compared with 3 months postoperation period. The amount of bone density on PRP group was significantly changed according to periods in contrast to bone graft only group. Conclusion: The bone density on PRP group was remarkably increased at 3 months postoperation compared to bone graft only group and it was seemed to be associated with more new bone formation, less grafted bone resorption at bone grafted sites with PRP.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.4
• /
• pp.307-311
• /
• 2007

Purpose: The aim of this study was simply assessing linear measurements in the lateral and medial approach, respectively, for bone harvesting using anatomic and three-dimensional(3D) computed tomographic(CT) analyses on a dried cadaveric proximal tibia. In addition, the availability of the three-dimensional computed tomographic(3D-CT) analysis was also estimated. Materials and methods: Ten dried proximal tibia were obtained from five Korean cadavers. Four the reference points, the SM(superior-medial), IM(inferior-medial), SL(superior-lateral), and IL(inferior-lateral) were marked around the tibial tuberosity. The PM(posterior-medial) and PL(posterior-lateral) points were randomly marked at points farthest from the lateral and medial reference points, respectively, in the posterior border of the superior articular surface of both condyles. All measurements were obtained on the dried proximal tibia. After computed tomography had been performed, the three dimensional images were reconstructed using V works $4.0^{TM}$(Cybermed Inc., Seoul, Korea), and the length between the reference points were measured three dimensionally using the method described above. The error between the mean actual and mean 3D-CT measurements was calculated in order to determine the availability of the three dimensional computed tomographic analysis. Results: The length between the reference points was greatest at the IL-PM, which averaged $65.39mm{\pm}10.35$. This was followed by the SL-PM with $63.24mm{\pm}8.10$, the IM-PL with $58.09mm{\pm}10.02$, and the SM-PL with $51.99mm{\pm}9.06$. The differences between the IL-PM and SM-PL were 13.4 mm. The mean values were 55.04 mm in the medial approach and 64.32 mm in the lateral approach, and the differences between medial and lateral were 9.28 mm. The error between the mean actual and mean 3D-CT measurements was 0.31% and the standard deviation was 0.28%. Conclusion: The anatomical and three dimensional computed tomographic analysis indicates that there was only a 9.28 mm linear difference between the lateral and medial approach. This is consistent with previous studies, which showed that there was little difference between the two approaches in terms of the bone volume. In addition, the error(0.31%) and the standard deviation(0.28%) were considered low, demonstrating high accuracy of 3D-CT. Therefore it can be used in preoperative treatment planning.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.4
• /
• pp.331-339
• /
• 2007

Background: Distraction osteogenesis(DO) is a useful method for treating cases demanding the generation of new bone. During DO, the angiogenic activity is crucial factor in the new bone formation. The aim of this study was to detect the autocrine growth activity in the cellular components of the distracted bone with observation of the co-expression of vascular endothelial growth factor(VEGF) and its receptors following the mandibular DO. Materials and methods: Unilateral mandibular distraction(0.5 mm twice per day for 10 days) was performed in six mongrel dogs. Two animals were killed at 7, 14, and 28 days after completion of distraction, respectively. Immediately after the animals were killed, the right mandibles were harvested en block. Immunohistochemical staining was processed for observation of the VEGF expression, and double immunofluorescent staining was also processed for detection of the co-expression of osteocalcin and VEGF's two distinct receptors(VEGFR-1 and VEGFR-2). Results: At 7 and 14 days after distraction, the expressions of VEGF were significantly increased in the osteogenic cells of the distracted bone. Up to 28 days after distraction, VEGF was still expressed moderate in the osteoblastic cells of distracted bone. The co-expressions of osteocalcin/VEGFR-1 and osteocalcin/VEGFR-2 were observed in the distracted bone at 7 and 14 days after distraction. In the double immunofluorescent staining, the co-expression' s level of osteocalcin/VEGFR-1 was more than that of osteocalcin/VEGFR-2. Conclusion: Taken together, this study suggested that VEGF plays an important role in the osteogenesis, and these osteoblastic cell-derived VEGF might act as autocrine growth factor during distraction osteogenesis. In the other word, the cellular components, such as osteoblasts and immature fibroblast-like cellsor mesenchymal cells in the distracted bone, might have autocrine growth activity during distraction osteogenesis.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.2
• /
• pp.150-156
• /
• 2015

As dental implant treatment becomes popular for both partial and complete edentulous patients, old people with complex systemic diseases also tend to prefer implant-assisted-overdenture or implant-supported-fixed prostheses to conventional complete denture. In this case, 77-year-old female who was on medication for hypertension and osteoporosis and paralyzed on right side due to stroke visited for implant-assisted-overdenture on lower jaw. After oral and radiographic examination, root-assisted magnet overdenture on upper jaw and implant-assisted magnet overdenture on lower jaw are planned. Consequently, overdentures using self-adjusting magnetic attachment(SA) system on both jaws resulted in recovering satisfying function and retention, which is enable to insert and remove with only one hand.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.3
• /
• pp.412-419
• /
• 2009

The purpose of this study was to provide the reference data evaluating the treatment effect of orthopedic appliances. The skeletal and dental growth increments were measured in 24 normal mixed dentition children (boys: 14, girls: 10) by three serial lateral cephalograms: initial mean age: 9${\pm}$1.3 years, mean observation period: 13${\pm}$1.3 months. Cephalometric changes were analysed. The results were as follows: 1. In boys, the maxilla showed forward and downward growth pattern and the mandible showed forward growth pattern (p<0.05). In girls, the maxilla and mandible showed forward and downward growth pattern(p<0.05). 2. Horizontal growth of both maxilla and mandible in girls was superior to those in boys (A point; girls: 2.39mm, boys: 1.26mm, with p<0.05), whereas vertical growth of both maxilla and mandible in boys was similar to those in girls. 3. The change in tooth axis showed labioversion of upper incisor (p<0.01) and comparatively stable lower incisor position.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.3
• /
• pp.539-547
• /
• 2008

Apert syndrome is an autosomal dominant condition characterized by craniosynostosis, midface hypoplasia, and syndactyly of the hands and feet. It occurs in about 1 of every 65,000 to 160,000 births and is caused by a mutation in the fibroblast growth factor receptor 2(FGFR2) gene. Apert syndrome typically produces acrobrachycephaly(tower skull). The occiput is flattened, and there is a tall appearance to the fore head. Ocular proptosis is a characteristic finding, along with hypertelorism and downward slanting lateral palpebral fissures. The middle third of the face is markedly retruded and hypoplastic, resulting in a relative mandibular prognathism. The reduced size of the nasopharynx and narrowing of the posterior choana can lead to mouth breathing, contributing to an open-mouth apprance. Three fourths of all patients exhibit either a cleft of the soft palate or a bifid uvula. The maxillary hypoplasia leads to a V-shaped arch and crowding of the teeth. A 6-year-old male patient visited to the Department of Pediatric dentistry, Kangnung National University of Dental Hospital. He visited the hospital to get treatment of carious teeth. The purpose of this report is to present a specific dental manifestations about the apert syndrome.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.4
• /
• pp.723-736
• /
• 1992

Most degeneating diseases and back pains in the orthopaedic disease are originated from the unbalance of stress distribution in the low-lumbar spine. Therefore the stress analysis of lowerback is indispensible to the clinical diagnosis for the developing reason and the developing process of diseases. Therefore the same model materials as following are eveloped to analyze the stress distributions of lower-back by photoelastic experiment. The verterbral body and the process are molded from epoxy resin(the weight ratio of Araldite and hardner is 10 to 3), models are geometrically identical to them in vivo respectively and the ratio of their elastic modulus to that of model material is 1 to 10. It is assured that KE-1300 Silicon(E=0.8MPa), TSE-3562 Silicon(0.5MPa) and the composite silicon(3MPa) (the weight ratio of KE-1300 silicon and Jioreal : 10 to 4) are respectively effective as the model materials of ligament, musles and intervertevral disc which is essential to the movement of low-lumbar spine. All the elements associated with the movement of the low-lumbar spine are molded through the molding method developed in this research and assembled with the angles between the verterbra and the disc in the normal human lumbosacral spine. The stress distributions of the assembled model are analyzed by photoelastic experiment. It is certified by comparing the results of photoelastic experimebt with the clinical situations that the loading dveice and the loading conceptions used in this paper are effective.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.4
• /
• pp.339-347
• /
• 2012

There still remains a controversial debate whether facial skeletal morphological differences exist between patients with nasal and mouth breathing habits. The aim of this study is to assess a relationship between over a period of time mouth breathing and facial skeletal morphology by analyzing lateral cephalometric radiographs of patients with nasal or mouth breathing habits. A total of 120 patients with skeletal class I, II, and III, who had undergone orthodontic diagnosis in department of pediatric dentistry - chonbuk national university, were chosen and their lateral cephalometric radiographs were analyzed. These patients were divided into six groups of 20, each with or without mouth breathing habits. The result of this study has not showed noticeable differences in cephalometric measurements between nasal and mouth breathing children of skeletal class I, II, and III (p > 0.05). However, when the groups were divided by age factor, mouth breathers of age 12 and older showed significant differences in cephalometrics such as decreased ramus height, maxillary retrusion, and clockwise pattern of mandible than children under age 12 (p < 0.05). In conclusion, a longer period of mouth-breathing habits in children displayed a greater chance of impaired facial growth.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.15 no.3
• /
• pp.199-210
• /
• 1993

Many surgeons are on the point of bone excision and reconstruction of the bone defects by autograft. xenograft, and allograft in the treatment of begin and malignant tumors of bone. Of all type of bone grafts, we received the autograft as the best ideal bone graft. Of autogenic bone graft, replantation of excised autogenic bone for reconstructiong the bone defects has been the ideal method until now, but early bone healing reponses and tumor cell devitalization after replantation of excised autogenic bone have not been identified for clinical applications. So, to evaluate bone healing response after replantation in rabbit's calvarial bone, we divided the experimental group into three groups. Group 1 is a fresh autogenous bone group. Group 2 is a deep frozen group. Group 3 is freeze-dried demineralized group. Obtained result were as followed: 1. Inflammatory cell infiltration appeared at I week and disappeared at 4 weeks in all experimental group, Especially, severe inflammatory cell infiltration showed in fresh autogenous bone group at 2 weeks. Group 3 is the least showing group on the point of inflammatory cell infiltration. 2. Osteoblastic activity evenly increased upto 4 weeks and maintained to 6 weeks and decreased after this period, especially osteoblastic activity in group 2 is less than group 1 and group 3. We can't discriminate between osteoblastic activity of group 1 and that of group 3. 3. In new bone formation, group 3 was more active than any other groups at early stage, but there were little differences among three experimental groups at later state. 4. Bone resorption around the grafted bone slightly appeared at 1 week and disappeared at 4 weeks in all experimental groups. We can find the more bone resorption in group 2 at 2 weeks than any other groups. We could suggest, as appears from our results, that freeze-dried deminiralized bone graft is the useful bone graft in the clinical applications of excised autogenic bone.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.1
• /
• pp.41-52
• /
• 2012

Purpose: Triangulation is the process of determining the location of a point by measuring angles to it from known points at either end of a fixed baseline. This point can be fixed as the third point of a triangle with one known side and two known angles. The aim of this study was to find a clinically adaptable method for applying an optical tracking navigation system to orthognathic surgery and to estimate its accuracy of measuring the bone displacement by use of triangulation methods. Methods: In orthognathic surgery, the head position is not fixed as in neurosurgery, so that a head tracker is needed to establish the reference point on the head surface byusing an optical tracking system. However, the operation field is interfered by its bulkiness that makes its clinical use difficult. To solve this problem, we designed a method using an Aquaplast splinting material and a mini-screw in applying a head tracker on a patient's forehead. After that, we estimated the accuracy of measuring displacements of the ball marker by an optical tracking system with a conventional head tracker (Group A) and with a newly designed head tracker (Group B). Measured values of ball markers' displacements by each optical tracking system were compared with values obtained from fusion CT images for an estimation of accuracy. Results: The accuracy of the optical tracking system with a conventional head tracker (Group A) is not suitable for clinical usage. Measured and predictable errors are larger than 10 mm. The optical tracking system with a newly designed head tracker (Group B) shows 1.59 mm, 6.34 mm, and 9.52 mm errorsin threeclinical cases. Conclusion: Most errors were brought on mainly from a lack of reproducibility of the head tracker position. The accuracy of the optical tracking system with a newly designed head tracker can be a useful method in further orthognathic navigation surgery even though the average error is higher than 2.0 mm.