• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.103-103
• /
• 2003

ZnO$_{1-x}$(또는 Zn$_{1+x}$O) 산화아연은 과잉의 아연(또는 oxygen vacancy)이 도우너(donor) 역할을 하는 비화학양론적 n형 산화물 반도체이다. ZnO는 높은 투과율을 가지고 온도나 주변환경에 대해 매우 안정하며, 또한 이미 상용화된 ITO (Indium tin oxide)에 비해 식각 특성이 우수하고, 수소 플라즈마에 대한 저항성이 크다는 장점 때문에 가스센서와 디스플레이용 소자 등 다양한 분야에 응용이 가능하다. ZnO 박막은 CVD, Reactive Magnetron Sputtering, Electron-beam Evaporation 등 여러 가지방법으로 제작할 수 있다. 본 연구에서는 형성된 박막의 구성성분이 타겟의 성분과 유사하고 낯은 기판온도에서도 박막이 형성되어지는 장점을 가지는 Pulsed Laser Deposition 방법을 사용하여 유리 기판위에 ZnO 박막을 형성하였다.다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.3
• /
• pp.183-191
• /
• 1991

A study was conducted to determine the influence of soil chemical properties on the distribution and forms of cadmium (Cd), lead (Pb), copper(Cu) and Zinc(Zn) in paddy soils near zinc mines. A sequential extraction procedure was used to fractionate the heavy metals in soils into the designated from of water soluble, exchangeable, organically bound, oxide/carbonate, and sulfide/residual. The predominant form of Cd, Pb, Cu and Zn in the soils was found to be sulfide/residual form. Oxide/carbonate Cd and Pb and organically bound Cu were high, while exchangeable Pb and Cu were very low. Water soluble Cd, Pb and Cu were not detected in the soils. The percentages of the heavy metals content in exchangeable fractions were inversely correlated with those in sulfide/residual fractions in the soils. Exchangeable Cd and Zn and the oxide/carbonate Pb were shifting to the sulfide/residual form with soil depth and the chemical forms of Cu were not changed. Organically bound Cu was positively correlated with soil organic matter content but Cd, Pb and Zn were not. The percentages of Cd, Pb and Zn content in exchangeable forms decreased with soil pH, while those in oxide/carbonate and sulfide/residual forms increased with soil pH. The amounts of oxide/carbonate and sulfide/residual forms of pb were higher than those of Cd and Zn at same soil pH.

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.393-395
• /
• 1987

• Resources Recycling
• /
• v.27 no.2
• /
• pp.68-76
• /
• 2018

EAF (Electric arc furnace) dust is an important secondary resource such as zinc, lead, and iron. Recycling of EAF dust is benefit to solving disposal and environmental problems caused by the heavy metals entrained in the dust. In this study, pyrometallurgical treatment technology of EAF dust reviewed for the improvement of conventional process and development of new process. The existing technologies categorized into four groups: those by rotary kiln process, rotary hearth furnace (RHF) process, shaft type process, and reduction smelting process. The product of these processes are ZnO and Fe or slag as a waste. Their mechanisms for the production of ZnO from EAF dust were carbothermic reduction and oxidation of zinc gas with air.

• Resources Recycling
• /
• v.11 no.4
• /
• pp.44-50
• /
• 2002

Characteristics on the sulfuric acid leaching of zinc and manganese from the spent zinc-carbon battery powders obtained by cushing and magnetic separation, were investigated with the variation of sulfuric acid concentration, reaction temperature, stir-ring speed and solid/liquid ratio. The sample powders were composed of Zn metal, ZnO, $MnO_2$ and $Mn_2$$O_3$. and it was found that the selective leaching of zinc was difficult in this system. At the condition of S/L ratio 1:10, IM H$_2$$SO_4$, $60^{\circ}C$ and 200 rpm, leaching rate of Zn and Mn are 92% and 35% respectively. The concentration of Zn and Mn in the leaching solution are 19.5 g/l, 7.8 g/l and pH of that solution is 0.75. It was confirmed at reducing agent should be added to increase e leaching rate of manganese with sulfuric acid.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.05a
• /
• pp.33-38
• /
• 1999

CCT(Clean Coal Technology)의 응용분야인 IGCC, PFBC 및 MCFC 등 석탄을 이용한 새로운 발전기술에 활용될 것으로 예견되는 고온건식 탈황기술은 고온(35$0^{\circ}C$~$650^{\circ}C$)과 고압(약 20기압)상태에서 금속 산화물로 된 고체흡수제(고온건식 탈황제)를 이용하여 반응기(유동층, 고속유동층 및 고정층과 이동층 반응기 등)에서 흡수와 재생반응을 통하여 석탄가스중에 있는 H$_2$S 등 황화물을 효율적으로 제거하는 기술이다.(중략)

• Economic and Environmental Geology
• /
• v.36 no.3
• /
• pp.177-189
• /
• 2003

The main purposes of this study are to utilize mineralogical studies such as optical microscope, XRD and SEM/EDS analyses to characterize the oxidation of sulfide minerals and the mechanisms controlling the movement of dissolved metals from waste rocks at the abandoned Seobo mine. Mineralogical research of the waste rocks confirms the presence of anglesite, covellite, goethite, native sulfur and nsutite as secondary minerals, suggesting that these phases control the dissolved concentrations of As, Cu, Fe, Mn, Pb and Zn. The dissolved metals are precipitated, adsorbed and/or coprecipitated with(or within) Fe(Mn)-hydroxides and Mn(Fe)-hydroxides. The main phases of secondary mineral, Fe-hydroxide, can be classified as amorphous or poorly crystalline and more crystallized phases(e.g. goethite) by crystallinity. Amorphous or poorly crystalline Fe-hydroxide has relatively high As contents(9-24 wt.%). This poorly crystalline Fe-hydroxide changes toward more crystallized phase(e.g. goethite) which contains relatively low As(0.6-7.7 wt.%). These results are mainly due to the progressive release of As with the crystallization evolution of the As-trapping poorly crystalline Fe-hydroxides. It is also attributed to the differences of specific surface areas between the poorly crystalline Fe-hydroxides and well crystallized phases. The dissolved metals from waste rocks at Seobo mine area are naturally attenuated by a series of precipitation(as Fe, Mn, Cu, Pb), coprecipitation(Fe, Mn) and adsorption(As, Cu, Pb, An) reactions. The results of mineralogical researches permit to assess the environmental impacts of mine waste rocks in the areas, and can be used as a useful data to lay available mine restoration plan.

• Journal of the Korean Chemical Society
• /
• v.47 no.3
• /
• pp.213-219
• /
• 2003

The photochemical transformation of carbon monoxide in aqueous solution has been investigated at $25{\pm}0.1^{\circ}C$using ZnO as a photocatalyst. After irradiation of 253.7 nm UV light in the solution, carboxylation and carbonylation processes were carried out, and the formation of formic acid, oxalic acid, glyoxylic acid, formaldehyde and glyoxal was observed. The formation of the products depended on the pH values in the solution. The yield of formaldehyde and glyoxal increased in acidic solution whereas it decreased in basic solution. When the pH values in the solution increased above 11.5, the yield of formic acid increased rapidly. The initial quantum yields of the products were determined and the probable mechanisms for the reactions were presented on the basis of the products analysis.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.6
• /
• pp.270-275
• /
• 2021

ZnO was synthesized according to the transformation behavior and crystallization conditions of Zn-intermediate obtained by zinc sulfate as a precursor and NaOH, Na₂CO₃ as a alkali agents. For ZnO crystallization, Zn₄(OH)₆SO₄·H₂O and Zn₅(OH)₆(CO₃)₂·H₂O as a Zn-intermediate were calcined at 400℃ and 800℃ for 1 h, respectively, based on decomposition temperature from TGA. Zn₄(OH)₆SO₄·H₂O was confirmed to have mixed Zn₄(OH)₆SO₄·H₂O and ZnO at 400℃, and was completely thermally decomposed at 800℃ to form ZnO phase. The prepared Zn₅(OH)₆(CO₃)₂·H₂O as a Zn-intermediate by the reaction with Na₂CO₃ was transformed to a complete ZnO crystallization over 400℃. Nano-sized ZnO can be synthesized at a relatively lower calcination temperature through the reaction with Na₂CO₃.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.3-3
• /
• 2008

21 세기 제 3의 산업혁명을 가져올 것으로 기대되는 나노기술(NT), 정보기술(IT), 바이오기술(BT)은 전 세계 과학자들의 마음을 사로잡고 있다. 이 가운데 나노기술은 전자산업에 응용시 그 기대효과는 우리가 상상하는 이상의 것이라 예상하고 있다. 나노기술에 특히 관심을 가지는 이유는 물질이 마이크로미터 크기로 작아져도 벌크 물질의 물리적 특성이 그대로 유지되지만, 나노미터 크기가 되면서 우리가 경험하지 못했던 새로운 물리적 특성들이 발현되기 때문이다. 그 특성에는 양자구속효과, Hall-Petch 효과, 자기효과 등이 있다. 나노기술의 구현은 양자점과 같은 영차원 나노입자, 나노와이어, 나노막대, 나노리본 등과 같은 직경이 100nm 이하의 일차원 구조의 나노물질 및 나노박막과 기타 100nm 이하의 나노구조물들이 사용된다. 현재 일차원 구조를 이용한 전자디바이스화 연구는 결정성장을 정확하게 조절하는 합성기술 합성된 일차원 나노물질의 물리적 특성을 지배하는 각종 파라미터들과 물리적 특성들과의 상관관계 정립, 나노와이어를 이용한 Bottom-up 방식에 의한 조립기술 확보를 위해 활발히 진행 중이다. 하지만 나노구조의 특성을 확인하는 형태의 연구일 뿐, 실제 디바이스화에는 여전히 많은 과제를 안고 있다. 본 연구에서는 산화아연을 기반으로 한 고품위 능동형 산화물 나노구조의 다양한 성장방법 및 물성 평가에 대해 연구하였다. 성장장비로는 MOCVD와 스퍼터링을 이용하여 대면적 균일 성장을 이룰 수 있었다. 특히 실제 광전소자에 응용요구에 알맞은 Bottom-up 방식에 의한 수직성장 기술, 길이/직경 비 향상 기술, 결정성 향상 기술, 저온성장 기술, Dimension 조절 기술 Interfacial layer 제거 기술 등을 중점적으로 연구하였다. Dimension 조절 기술로 p-Si 기판위에 성장된 나노 LED에서는 밝은 emission을 관찰하였으며, 세계에서 최초로 스퍼터링을 이용하여 4인치 웨이퍼에 대면적 수직 성장하였다. 최근에는 선택적 삼원계 씨앗층을 이용한 길이/직경 비가 매우 향상된 MgZnO 나노와이어를 Interfacial layer 없이 수직으로 성장하여 산화물 전계방출 에미터로서의 가능성을 확인하였다.