• Journal of the Korean Chemical Society
• /
• v.27 no.6
• /
• pp.449-456
• /
• 1983

The facile route of preparing S-2-(${\omega}$-aminoalkylamino) ethyl dihydrogen phosphorothioates, potential chemical radioprotectants, have been studied. Intermediate 3-(2-phthalimidoethyl)-2-oxazolidinone was prepared by a reaction of potassium phthalimide and 3-(2-bromoethyl)-2-oxazolidinone, which was obtained through the alkaline ring closure of a mixture of carbonate and 2,2'-dibromo diethylamine prepared from diethanolamine. This was converted to N-[2-(2-bromoethylamino)ethyl] phthalimide hydrobromide by 30% HBr(gas) in acetic acid and N-(2-bromoethyl)-1,2-ethanediamine dihydrobromide was obtained by reacting the hydrobromide with a solution of HBr-HOAc. N-(2-bromoethyl)-1,3-propanediamine dihydrobromide could be prepared through the Cortese treatment of 2-(3-aminopropylamino) ethanol, which was prepared by a reaction of 1,3-diaminopropane and 2-chloroethanol. These dihydrobromides were treated by sodium thiophosphate in DMF to result S-2-(${\omega}$-aminoalkylamino) ethyl dihydrogen phosphorothioates. The characteristics of each reaction path were discussed in regards to reaction conditions and overall yields and a facile route of preparing each derivative was proposed.

• Analytical Science and Technology
• /
• v.28 no.2
• /
• pp.79-85
• /
• 2015

A preliminary experiment was performed to develop a fast, convenient, and economical semi-quantitative method of analyzing amphetamine-like amines from images of derivatives. These were generated from the reaction (in situ, co-spot) of three amphetamine-like compounds with three derivatization reagents on a TLC plate. The attempt was made to optimize the reaction conditions for an efficient derivatization reaction, and TLC images taken by a digital camera were analyzed using two types of image analysis program (CP Atlas 2.0 and ImageJ) for repeatability (RSD, %) and linearity (R²). Then, their results were compared. For efficient derivatization, the reaction conditions needed to be modified. The results of image analysis of each of the samples at two different concentrations (0.5 mg/mL and 0.01 mg/mL) showed that the RSD values for reaction repeatability were in the range of 0.69-5.50%. From the calibration curves between the area of the derivative and the concentration of amines, the R² values (R² > 0.9906) for good linear correlation were found to be high, in a concentration range of 0.1-0.005 mg/mL of amines. In addition, the two programs demonstrated little difference in the analysis of repeatability and linearity of the derivatization, so that the current method has the potential to be used for the semi-quantitative analysis of amines.

• Applied Chemistry for Engineering
• /
• v.7 no.1
• /
• pp.171-176
• /
• 1996

The easily biodegradable nonionic surfactant of glucamide(N-alkyl-N-acyl glucamine) was synthesized by the two-step reaction. The first step was the amination between alkylamine and glucose in methanol. Then, alkyl glucamines were obtained by reduction using Ni catalyst under the high pressure with 86~93% of reaction yield. The second step was the synthesis of glucamide from alkyl glucamine and fatty acid methyl ester in methanol under the alkali catalytic condition while refluxing the solvent. The reaction yield of this step was 84~95% except the benzyl glucamine, which the reaction yield was 50~70%. The molecular structure of four kinds of alkyl glucamine and 16 kinds of glucamide with different alkyl and acyl groups was studied by IR, MS and NMR.

• Journal of the Korean Electrochemical Society
• /
• v.25 no.2
• /
• pp.81-87
• /
• 2022

In this study, the effect of alkylamine on copper electroplating was analyzed using cyclic voltammetry. When water-soluble alkylamines were added to the plating solution, the reduction reaction of Cu²⁺ was inhibited. The inhibition effect of 1,12-diaminododecane has been investigated at various concentrations and conditions of the plating solution. 1,12-diaminododecane was protonated in the acidic plating solution, and therefore, it did not act as a complexing agent for Cu²⁺. Accordingly, it was confirmed that the inhibiton effect of 1,12-diaminododecane was attributed to adsorption on the Cu surface. The adsorption of 1,12-diaminododecane exhibits two characteristics: (i) protonation and subsequent electrostatic attraction with anions pre-adsorbed on Cu surface, and (ii) direct adsorption on Cu surface via amine functional group. The adsorbed 1,12-diaminododecane caused three-dimensional growth and grain refining, as well as the inhibition effect, during Cu electroplating.

• Polymer(Korea)
• /
• v.26 no.2
• /
• pp.153-159
• /
• 2002

In order to remove $NO_3;^-$ ion from ground-water, fibrous ion -exchangers, APP-g-GMA, were synthesized by GMA grafting onto PP trunk polymer with E-beam accelerator for pre-irradiation. Their degrees of grafting and amination yield increased up to $60^{\circ}C$ and showed maximum values as 133%, 88%, respectively. And their swelling ratio and ion exchange capacity at the maximum values are 86%, 2.5 meq/g, respectively which was higher than commercial ion-exchangers such as IMAC HP555 and Amberlite IRA 400. Optimum adsorption condition of $NO_3;^-$ ion was measured at pH 5~6 and -Cl form of APP-g-GMA containing trimethylammonium group showed the highest adsorption capacity.

• Resources Recycling
• /
• v.27 no.3
• /
• pp.93-99
• /
• 2018

Effective extraction of platinum group elements by dissolving waste platinum scrap from the display industry and solvent extraction, was studied. The extracted platinum solution was prepared as a precursor solution for diesel automotive exhaust gas purification catalyst and its catalytic activity was tested. The behavior of aqueous species of platinum was investigated through solution chemistry and based on the existence and behavior of these chemical species, the possibility of extraction and separation was established. By dissolving waste scrap by electrochemical method, the dissolution time of scrap was shortened and the extraction efficiency was increased. Through separation and removal of rhodium component, solvent extraction by TBP, and stripping by hydrochloric acid, Pt-Chloride-$H_2O$ solution was prepared. And then, an platinum amine complex solution through amination reaction with this solution as a raw material was prepared. The possibility of producing high-value platinum compounds from platinum group waste scrap was investigated by preparing platinum amine complex solution and then examining the catalytic activity with this amine precursor on the combustion reaction of carbon black.

• Applied Chemistry for Engineering
• /
• v.22 no.1
• /
• pp.48-55
• /
• 2011

It was found that the absorbent mixed with 2-aminoethanol and others has been applied to remove them via chemical neutralization. The absorbent of natural second metabolites was achieved by a removal efficiency of 20~30% by itself depending on treatment conditions, but the complex absorbent mixed with 0.2% amine chemical provides the removal efficiency of over 98%. Optimal removal efficiencies have been examined against two major parameters of the temperature and pH to remove ammonia and hydrogen sulfide gases. The chemical analysis was also performed to analyze the composition of an essential oil by GC-MS. The monoterpenes in an essential oil reacted with odorous compounds by neutralization and their reaction mechanism was partially elucidated.

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.64-71
• /
• 1992

New type dioxygen bridged complexes of palladium were prepared by using $KO_2$ as a source of superoxide ion($O_2{^-}$). The method is completely different from the traditional one which has adopted the oxidative addition of molecular oxygen to prepare the dioxygen complexes. This reaction proceeds via nucleophilic displacement followed by electron transfer reaction. Three new type dioxygen complexes of palladium having amine ligands were prepared and characterized by the application of the reaction of $O_2{^-}$.

• Applied Chemistry for Engineering
• /
• v.3 no.3
• /
• pp.499-506
• /
• 1992

Copolymer of Styrene and GMA(glycidyl methachylate), having reactive ratios of $r_1=0.53$, $r_2=0.44$, was synthesized in dioxane using AIBN as free radical initiator. Followed by the reaction of ethylene diamine with copolymer PGS, amine groups were introduced to the PGS(NPGS). The composition of copolymer was determined by elemental analyzer. Poly(glycidyl methacrylate) (PGMA) was obtained in benzene using AIBN as free radical initiator. The NPGS-PGMA blend of 50/50 composition was prepared by mixing these polymers in THF at $65^{\circ}C$. Glass transition temperature (Tg) of NPGS-PGMA blend was measured by DSC. The blend showed a single Tg. Accordingly, it was clear that the NPGS was compatible with PGMA. An intermolecular reaction between amine groups of NPGS and epoxy groups of PGMA imparts compatibility in the NPGS-PGMA blend. When the NPGS-PGMA blend was added to the incompatible PS-PGMA blend, PS-PGMA blend showed Tg change. Scanning Electron Micrograph(SEM) showed a fine morphology in this blend. Consequently, it was apparent that the NPGS-PGMA blend acted as a compatibilizer for the PS-PGMA blend.

• Journal of the Korean Ceramic Society
• /
• v.19 no.3
• /
• pp.199-204
• /
• 1982

Bowl 형태의 일본산 Nagano 점토에 대한 분류 및 특성화 연구를 하였다. 결정입자 크기를 1$\mu$ 이하로 침강분리 시킨후 전자현미경으로 결정형태를 관찰하였다. 아울러 결정형태, 구조적 결함 및 intercalation 반응성의 상호관계를 검토하기 위하여 tube 형태의 한국산 halloysite 및 plate 형태의 kaolinite를 비교 조사하였다. 특이한 Bowl 형 Nagano 점토는 tube형 halloysite와 화학 반응성에서 동일하여 극성 내지는 hydrogen bridge 결합을 하는 guest 분자와 반응하여 층간삽입 화합물을 형성 하였다. 화학반응성에 따른 점토분류방법에 의해 Nagano 점토가 halloysite임을 밝혔으며 아울러 결정의 형태는 반응성에 영향을 미치지 않음을 알 수 있었다.