• Korean Chemical Engineering Research
• /
• v.47 no.2
• /
• pp.248-257
• /
• 2009

In this paper, human exposure and risk of environmental pollutants were predicted using an emission assessment model and multimedia fate model. Eight environmental pollutants, acetaldehyde, acrylonitrile, aniline, benzene, carbon tetrachloride, dichloromethane, formaldehyde and vinyl chloride, were selected for the risk assessment in an urban and industrial area in Korea. The emission rate of target pollutants were estimated after considering a variety of point and non-point emission sources including geographical information. A spatially refined multimedia fate model was applied to predict the environmental concentration and fate of pollutants. Hazard data of target materials were obtained from the IRIS(Integrated Risk Information System) database. Using the modeling results with hazard data, the human risks were assessed. Modeling results demonstrate that the considerable risks were observed for several pollutants.

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.111-118
• /
• 1992

The curing acceleration of epoxy/amine system was investigated by using differential scanning calorimeter(DSC), The epoxy, diglycidylether of bisphenol A (DGEBA) was cured with methylene dianiline (MDA) with or without accelerators. Two kinds of accelerators were tested for the study ; tris(dimethylaminomethyl)phenol (DMP - 30) and 3 - (3,4 - dichlorophenyl)-1, 1-dimethylurea (DIURON). Heats of reaction and glass transition temperatures ($T_g$) of the cured epoxy system were analyzed by DSC along with the estimation of activation energy by the dynamic DSC studies. It was found that DMP - 30 is more effective accelerator than DIURON which showed faster curing and lower activation energy.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.1
• /
• pp.85-92
• /
• 2015

The 50 mole% HCl doped polyaniline(PAni) was synthesized by polymerization of aniline in the presence of hydrochloric acid and ammonium persulfate(APS) as dopant and oxidant, respectively. Then, conducting biodegradable cellulose acetate composite films were also prepared with PAni in acetone to find their applicability to antistatic packaging materials. The tensile strength of PCA05 film with 5 wt% of PAni was decreased by 27% from $377.1kg_f/cm^2$ for CA film itself to $275.2kg_f/cm^2$. Elongation was also decreased from 7.65% to 4.35%. Surface registance of $7.0{\times}10^9{\Omega}/sq$ could be achieved for the PCA containing 5 wt% of PAni. Therefore, this PCA05 film can be applied to antistatic package film for electronic board. In addition, decomposition temperature of these PCA films obtained by thermogravimetric analysis(TGA) was decreased with the amount of PAni in PCA films, and the final weight of char was directly proportional to PAni contents. From this thermal result we can calculate the content of PAni in unknown PCA films.

• The Korean Journal of Pesticide Science
• /
• v.9 no.3
• /
• pp.185-190
• /
• 2005

Solid phase synthesis of 16, which is a derivative of the first systemic fungicide, carboxin 1 was described. Reaction of 1,3-oxathiolane derivative with solid resin of 4-hydroxy-3-nitrobenzophenone 6 gave 9 in 82% yield. Oxidation of sulfur in the solid 1,3-oxathiolane 9 by MCPBA followed by a ring expansion reaction under the acid catalyst afforded the corresponding dihydro-1,4-oxathiin derivative 12. Treatment of the solid 1,3-oxathiolane 9 with p-methoxyaniline resulted in 1,3-oxathiolane 14, 1,3-oxathiolane sulfoxide 15, dihydro-1,4-oxathiin 16, and acetoacetanilide derivative 17 in 41%, 35%, 14%, 10% yields, respectively.

• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.934-938
• /
• 1999

Effect of processing agents on physical properties on aniline-type leathers such as wet blue, crust leather, and finished leather has been investigated. These leathers were manufactured from pelts obtained by the chemical, the enzyme, and the bio-tech treatment. There was no difference in physical properties between crust leather and finished leather. All finished leathers with the three treatments were satisfied with the Korean Industrial Standard like a tensile strength of $1.2kg_f/mm^2$, an elongation of 30%, a tear strength of $3.0kg_f/mm$, a grain crack weight of $15kg_f$, and a $Cr_2O_3$ content of 2.5%. In peculiar, application of the bio-tech treatment gave the best leather. This improvement of physical quality could be explained by the results of SEM and image analyser.

• Applied Chemistry for Engineering
• /
• v.10 no.8
• /
• pp.1210-1215
• /
• 1999

Optimum conditions of the hydrogenation of PNA to pure PPD were determined in a three-phase slurry reactor with suspended Pd/C catalyst particles. Minimization of mass transfer resistances at the interfaces of both gas-liquid and liquid-catalyst particles and control of overall reaction rate on catalyst surface leaded to decrease the hydrogen starvation on reaction active sites and to reduce the side reactions during hydrogenation. The optimum temperature, pressure, and catalysst concentration were confirmed to be in the range of $60^{\circ}C$, 60~70 psig, and 1~2 g-cat/L, respectively. Reaction rate was zero order with respect to the concentration of PNA and 1st order with respect to the pressure of hydrogen(P). Overall rate expression of the reaction was $R_A=6.44{\times}10^6{\cdot}H{\cdot}P{\cdot}m{\cdot}$exp(-4659/T) where H is constant, m is concentration of catalyst, and T is temperature.

• Analytical Science and Technology
• /
• v.6 no.1
• /
• pp.57-63
• /
• 1993

Spectrophotometric determination of cobalt by flow injection method is described. 2-(5-Bromo-2-pyridylazo)-5-(N-propyl-N-sulfopropylamino) aniline rapidly forms a water-soluble complex with cobalt in $NH_3-NH_4Cl$ buffer solution at pH 10.5. The absorption maxima of this complex is at 545 nm with molar absorptivity of $58000L\;mol^{-1}\;cm^{-1}$. The calibration curve of cobalt is linear over the range of 0.1 to 0.6ppm and the detection limit is 25ppb. The relative standard deviation is ${\pm}0.72%$ for 0.5ppm and the sampling rate is $60samples\;hr^{-1}$. The interfering effect of some cations and anions was investigated. Ni(II), Cu(II), Fe(III) and $CN^-$ interfered severely. The interfering effect of these matallic ions could be decreased by adding $1.0{\times}10^{-3}M$ EDTA solution to the carrier stream.

• Applied Chemistry for Engineering
• /
• v.4 no.1
• /
• pp.144-152
• /
• 1993

Immobilized polyethylene glycols onto metal oxides such as ${\gamma}-Al_2O_3$, ${\alpha}-Al_2O_3$, $SiO_2$ and $TiO_2$ were used as phase transfer catalysts for the room temperature synthesis of aniline from nitrobenzene and ironpentacarbonyl. The amount of attached PEG molecules increased with specific surface area of metal oxides. Among the immobilized catalysts tested PEG/${\gamma}-Al_2O_3$ showed the highest activity. The reaction rate increased with the chain length of PEG mole-cules and the aqueous NaOH concentration. Mechanistic study carried out using infrared spectrometer revealed that the role of PEG was to increase the formation of $HFe(CO)_4{^-}$ ion, which is known as active species, and its movement from aqueous to organic phase.

• Journal of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.551-557
• /
• 1989

7-Alkyl-1,3-dihydroxyphenazine-5,10-dioxides were synthesized by the reaction of 1,3,5-trihydroxybenzene with 6-alkylbenzofuroxans which had been obtained from aniline and n-alkyl alcohols bearing butyl, hexyl and octyl group. 1,3-Dihydroxyphenazine-5,10-dioxide was also prepared by the reaction of 1,3,5-trihydroxybenzene with benzofuroxan. The surface tension of aqueous solutions of these phenazine dioxide derivatives was determined by surface tensiometer and it was found out that the surface tension decreased with an increase of the number of carbon in the alkyl group. The antimicrobial activities of these phenazine dioxide derivatives were investigated in terms of minimum inhibitory concentration by the common twofold dilution technique. The derivative bearing butyl group showed the highest activity among these derivatives examined. It was observed that the antimicrobial activity of these alkyl substituted phenazine dioxide derivatives was stronger than that of the unsubstituted phenazine dioxide derivative.

• Journal of the Korean Chemical Society
• /
• v.46 no.4
• /
• pp.330-336
• /
• 2002

For the purpose of development of new agrochemical fungicide of ${\alpha},{\beta}-unsaturated$ carboxanilide series a synthesis of 4-acetyl-3-methyl-N-phenyl-1,4-thiazine-2-carboxamide (6) is described. Pummerer reaction of sulfoxide 7 obtained by sulfoxidation of dihydro-1,4-thiazine methyl ester 11 gave ${\alpha}-acetoxy$ dihydro-1,4-thiazine 10a. Under the same reaction conditions, dihydro-1,4-thiazine carboxanilide sulfoxide 14 was converted to acetoxymethyl dihydro-1,4-thiazine 18 through vinylogous Pummerer reaction involving carboxanilide of sulfonium ion through intermediate 15.1,4-Thiazine carboxanilide 6 was synthesized from the treatment of ${\alpha}-acetoxy$ dihydro-1,4-thiazine 10a with acid cat-alyst followed by hydrolysis and then the reaction with aniline.