• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.156-156
• /
• 2013

대기압 저온 플라즈마는 간단한 구조 및 제작, 쉬운 조작성, 낮은 온도 특성, 높은 화학적 반응성과 같은 많은 장점에도 불구하고, 플라즈마의 에너지가 낮아 다양한 산업적 응용에 제약을 받아왔다. 이러한 단점을 극복하기 위해서 대기압에서 저온 플라즈마의 에너지를 높이는 여러 시도가 있었으며, 그 중 가까이 인접해 있는 둘 이상의 플라즈마 젯들의 결합 현상(plasma jet-to-jet coupling)을 이용하여 플라즈마 강도를 높이려는 시도가 보고되었다. 본 연구에서는 플라즈마를 발생시키는 유리관을 서로 모아 벌집모양의 배열을 갖는 플라즈마 젯 어레이 장치를 만들어 플라즈마 젯 사이에 상호결합을 유도하여 강한 플라즈마 발광을 발생시켰다. 플라즈마 젯 어레이 장치 중 가운데 위치한 플라즈마 젯은 대기압 플라즈마 젯의 형태를 구현하는 역할을 하고, 가운데를 둘러싼 주변의 여러 플라즈마 젯들은 중앙의 플라즈마 젯에 많은 하전입자를 제공하여 플라즈마 젯의 발광강도를 높이는 역할을 하는 것을 확인했다. 헬륨기체를 사용한 이 플라즈마 젯은 $100^{\circ}C$ 이하의 온도임에도 불구하고 ITO 유리의 유리면을 식각할 만큼 높은 에너지를 가졌다. 이러한 대기압 저온플라즈마 장치에서 플라즈마의 강도를 더 높이기 위해서는 플라즈마 젯 간 결합이 더 많이 일어나는 것이 중요하므로, 이를 위해 주변의 플라즈마 젯의 개수를 높이는 시도를 하였다. 플라즈마 젯 어레이 소자의 중심에 위치한 유리관의 크기를 크게 하고, 주변부의 유리관의 크기를 상대적으로 작게 하여 벌집형태의 배열보다 더 많은 유리관을 주변부에 위치시킨 후 플라즈마를 발생시키고 전기 광학적 특성을 측정하였다. 그 결과, 실험조건에 따라 가운데 플라즈마 젯에서 3배에서 5배 이상 높은 플라즈마의 발광강도를 얻었으며, 플라즈마 젯도 더 안정적으로 발생하였다. 주변부의 유리관의 개수가 증가하면 더 많은 양의 하전 입자들이 플라즈마 결합 과정에 참여하게 되고 결과적으로 더 큰 플라즈마의 발광강도를 나타내는 것이다. 본 실험은 하전입자의 상호작용에 의해 발생하는 서로 인접한 플라즈마 젯 간의 결합이 대기압 저온 플라즈마 젯의 플라즈마 발광강도를 높이는 좋은 방법임을 보였다. 이러한 플라즈마 젯 간의 결합은 대기압 저온 플라즈마의 에너지를 높일 수 있는 쉽고 간단한 방법이며, 이 방법을 이용하여 대기압 저온 플라즈마를 표면처리, 표면개질은 물론, 식각 및 증착, 나아가서는 의료/바이오 분석 기술 등 다양한 학문적, 산업적 응용에도 적용할 수 있을 것으로 기대한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.263.1-263.1
• /
• 2013

탄소나노튜브(CNT)를 이용한 초소형 X선 튜브는 근접 암치료, 비파괴 X선 영상 장치, 휴대용 X선 분광계 등에서 X선 발생소스로 많이 연구되고 있다. 2극형 CNT 에미터의 경우 구조가 단순하여 초소형 X선 튜브에 쉽게 장착할 수 있지만 아노드의 전압과 전류가 연동되기 때문에 튜브의 조작성이 제한적이다. 3극형은 상대적으로 복잡한 구조이고, CNT에서 방출된 전자가 게이트 전극으로 흐르는 누설 전류 그리고 절연체와 충돌하여 차징을 발생시킬 수 있기 때문에 직경이 좁은 초소형 X선 튜브에 구현하기가 쉽지 않다. 하지만 초소형 X선 튜브를 다양한 X선 장치에 응용하기 위해서는 아노드 전압과 전류의 독립된 조작이 가능한 3극형 CNT 에미터가 반드시 구현되어야 한다. 본 발표에서는 전자빔의 아노드 집속을 강화하고 절연체에서의 차징을 줄이는 포커싱 기능의 게이트(FFG) 구조를 제안하였고. 이를 적용하여 초소형 X선 튜브들을 제작하고, 분석하였다. FFG 구조가 성공적으로 적용된 초소형 X선 튜브는 게이트 누설 전류 없이 뛰어난 전류 및 X선 방출 특성을 보였다. 이와는 달리, 몇몇 초소형 X선 튜브들에서는 게이트 누설 전류가 나타났고, 아노드 전압에 의한 게이트 전압 상승이 발생하여 불안정한 구동 특성을 보였다. 초소형 X선 튜브를 밀봉하지 않고 진공 챔버에서 실험한 결과, 유도된 게이트 전압은 상당한 시간이 흐르거나 진공챔버에 공기를 주입하고 다시 진공상태로 만들면 유도전압이 제거되는 것을 볼 수 있었다. 결론적으로 CNT에서 방출된 전자빔이 정상궤도를 벗어나 게이트 누설전류와 차징에 의한 게이트 유도전압을 발생시키면 초소형 X선 튜브가 불안정한 구동을 하고, 결국 튜브의 심각한 결함으로 나타나게 된다. 즉, 게이트 누설 전류와 유도된 게이트 전압은 3극형 CNT 에미터가 장착된 초소형 X선 튜브의 디자인과 제작에 있어서 성공 기준이 될 수 있다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.12
• /
• pp.1065-1072
• /
• 2014

The shape of an impeller splitter for a dual-inlet centrifugal blower was optimized to enhance the blower performance. Two design variable, the normalized chord and pitch of a splitter, were used to evaluate the blower performance and internal flow fields based on the three-dimensional flow analysis. The blower performance obtained using this numerical simulation had a maximum error of 4 percent compared to that in an experiment at the design flow condition. The shape optimization of the splitter successfully increased the blower efficiency and pressure by 3.65 and 1.14 percent compared to the reference values. The blower performance was increased by reducing the flow separation near the blade suction surface by optimizing the shape of the splitter, which produced a pressure increase at the outlet of the volute casing.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.399-402
• /
• 2004

In the optical drive system, adopting the optical flying-type head (OFH) flying on a removable plastic disk, the flying stability of the small OFH should be carefully considered to ensure the reliability for first surface recording. Additional micro actuators for focus servo are discussed for better interface of optical flying head on thin cover layered plastic disk to eliminate focus error due to the non-uniformity of cover layer thickness and the tolerance of lens assembly. This study gives two simulation results on the flying stability of the OFH. One is the dependence of the flying height and pitch angle variations on the wavelength and amplitude of disk waviness. The other is the flying stability of the slider and suspension system during the dynamic load/unload (U/UL) process.

• Journal of Korean Philosophical Society
• /
• v.146
• /
• pp.1-24
• /
• 2018

The purpose of this paper is to explore the meaning of theoretical ethics regarding bioethics. First, I explore the meanings and limitations of the bioethics domain for 'the principle of equal consideration of interests' and the 'preference utilitarianism' concepts Singer presents. Secondly, I emphasize the significance of Kant's ethics in the domain of bioethics. Lastly, I suggest that Aristotle's virtue ethics should be realized in the domain of bioethics. Furthermore, I would like to suggest the meaning of human life through this. Singer's argument brings up a new topic about the meaning of evolved life not considered in the history of traditional ethics. He presented undeniable opinions about human dignity that he took for granted. In addition, it is assessed that the scope extension for the life respect target has been reasonably achieved. Contrary to this, Kant's ethics explains the meaning of human dignity based on its metaphysical meaning. Furthermore, it provides an appropriate orientation for human life. Embracing their claims is not sufficient to explain the meaning of Good Life. The meaning of Good Life is likely to be resolved through the application of Aristotle's virtue ethics. The meaning of a being of substance is living and furthermore, it is inherent to being itself.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.616-623
• /
• 2012

Turbopump is a key component in liquid rocket engines, and reducing weight while maintaining structural safety is one of the major concerns of turbopump designers. To reduce the weight aluminium alloy castings instead of steel casings are introduced. The casting process is especially useful for enhancement of productivity and for reduction of product costs. But, since castings are used in space vehicle engines, reliability cannot be compromised therefore proper design, production process and thorough investigation should be performed to ensure structural integrity. In this study inlet casings for a fuel pump are casted with A356.0-T6 alloy and using one of them a burst test is conducted to ensure structural integrity. Structural analysis is performed for simulation, and with multiple strain gages strains are measured and compared with predictions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.3
• /
• pp.201-208
• /
• 2021

In this paper, the effect on the lateral and torsional behavior of ballastless railway plate girder bridge by the installation of the lower horizontal bracing has been reviewed. First of all, the most efficient lower bracing arrangement has been reviewed by comparing and examining the lateral displacement due to the train load, targeting analysis models with different arrangement types of lower bracing. Next, the research on torsional behavior of plate girder bridge with lower bracing has been conducted. In addition, the torsion constant from FEM analysis results has been compared with the torsion constant of a railroad plate girder bridge with a closed section by substituting the upper and lower horizontal bracing with equivalent thickness. Based on this comparison, the impact on the bridge span length and the cross section area of the lower bracing has been examined. Through this study, the curve graph related to lateral buckling moment and torsional constant ratio is presented and the range of plate girder bridge requiring torsional reinforcement is proposed.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.3
• /
• pp.51-57
• /
• 2021

In this paper, we propose a method to find the DoF(Depth of field) that is blurred in an image by focusing and out-focusing the camera through a efficient convolutional neural network. Our approach uses the RGB channel-based cross-correlation filter to efficiently classify the DoF region from the image and build data for learning in the convolutional neural network. A data pair of the training data is established between the image and the DoF weighted map. Data used for learning uses DoF weight maps extracted by cross-correlation filters, and uses the result of applying the smoothing process to increase the convergence rate in the network learning stage. The DoF weighted image obtained as the test result stably finds the DoF region in the input image. As a result, the proposed method can be used in various places such as NPR(Non-photorealistic rendering) rendering and object detection by using the DoF area as the user's ROI(Region of interest).

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.1
• /
• pp.17-33
• /
• 2022

Ti₃C₂T_X MXene, first reported by Naguib et al. in 2011, has attracted tremendous attention due to its excellent hydrophilicity, electrical conductivity, and mechanical/chemical stability. Since MXene is a two-dimensional material with a thickness of few nanometers, which ensure its flexibility. In last few years, due to these properties many researchers used Ti₃C₂T_X MXene into various fields such as flexible smart sensors, energy harvesting/storage devices, supercapacitors and electromagnetic interference shielding systems. In this review article, we have briefly discussed the various synthesis processes and characteristics of Ti₃C₂T_X MXene. Moreover, we reviewed the latest development of Ti₃C₂T_X MXene as flexible electrode material to be used into different applications.

• Journal of The Korean Society of Integrative Medicine
• /
• v.10 no.2
• /
• pp.169-176
• /
• 2022

Purpose : The purpose of this study is to investigate the effect of squat, bracing and aerobic exercise on lung function, which is known to be effective for strength training, on lung function. Methods : The study was conducted with 33 students from Busan K university. Eleven students were assigned to squats, bracing, and aerobic exercise, six weeks three times a week. In order to measure lung activity, pony Fx manufactured the change amount of FVC (forced vital capacity), FEV₁ (Forced expiratory volume at one second), and FEV₁/FVC % (forced vital capacity/forced expiratory volume at one second) was analyzed after inputting the information of experimental group A and B controls. As a method of measurement, the difference between the three groups was analyzed using repeated ANOVA. Results : As a result of analyzing the effects of squat, bracing, and aerobic exercise for 6 weeks, all values of FVC, FEV₁, FEV₁/FVC % were increased from 0 weeks to 6 weeks except FEV₁/FVC %. There was no significant difference in FVC from week 3 to week 6. In the squat, bracing, and aerobic exercise, the changes in spirometry showed that the FVC, FEV₁, and FEV₁/FVC % values in bracing exercise were significantly increased with time than before exercise. As a result of analyzing the changes in the spirometry of squat, bracing, and aerobic exercise, the FVC, FEV₁, FEV₁/FVC % values in the squat exercise showed statistically significant difference according to the period, but the lowest increase among the three groups. Conclusion : In conclusion, aerobic, bracing and squat exercises all had a significant impact on improving lung function. Therefore, even without aerobic exercise, squat or bracing exercise alone can be expected to improve lung function.