• Tunnel and Underground Space
• /
• v.32 no.5
• /
• pp.285-297
• /
• 2022

We report results of Extended Leak-Off Test (XLOT) conducted in a large diameter borehole, which is drilled for installation of deep borehole geophysical monitoring system to monitor micro-earthquakes and fault behavior of major fault zones in the southeastern Korean Peninsula. The borehole was planned to secure a final diameter of 200 mm (or more) at a depth of ~1 km, with 12" diameter wellbore to intermediate depths, and 7-7/8" (~200 mm) to the bottom hole depth. We drilled first the 12" borehole to approximately 504 m deep and installed American Petroleum Institute standard 8-5/8" casing, then annulus between the casing and bedrock was fully cemented. XLOT was carried out for several purposes such as confirming casing and cementing integrity, measuring rock stress states. To that end, we drilled additional 4 m long open hole interval to directly inject water and pressurize into the rock mass using the upper API casings. During the XLOT, flow rates and interval pressures were recorded in real time. Based on the logs we tried to analyze hydraulic conductivity of the test interval.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.1
• /
• pp.65-74
• /
• 2023

This study compared the surface roughness and microbial adhesion characteristics of Omnichroma, a novel composite resin developed using "smart chromatic technology", with those of two other conventional composite resins with different filler compositions. A total of 144 specimens were fabricated using 3 types of composite resins: Omnichroma (nano-spherical), Filtek Z350XT (nanofill), and Tetric N-Ceram (nanohybrid) and, divided into 3 groups of 48. Finishing was performed using tungsten carbide burs. Specimens were then divided into 3 subgroups using different polishing methods: Control, SofLex, and PoGo. Surface roughness was analyzed quantitatively and qualitatively using an atomic force microscope and a scanning electron microscope. Microbial adhesion was assessed by culturing Streptococcus mutans on the specimens for 24 hours and then measuring colony-forming units attached to the upper surface. The surface roughness (Ra) of Omnichroma was 0.123 ㎛ after finishing, and it exhibited a smooth surface compared to the other resins. However, after polishing, there were no significant differences in the surface roughness between the three composite groups, regardless of the polishing methods. The surfaces of the Control subgroups were significantly rougher than those of the SofLex subgroups in all 3 composite groups. However, except for Tetric N-Ceram, there were no significant differences between the Control and PoGo subgroups in the other composite groups. Microbial adhesion assessment showed no significant differences between any of the 3 composite resin subgroups; however, Omnichroma exhibited higher microbial adhesion than the other two composites. No significant correlation was observed between surface roughness and microbial adhesion.

• Geophysics and Geophysical Exploration
• /
• v.23 no.4
• /
• pp.243-252
• /
• 2020

To share an understanding of trajectory measurement in surveys using borehole, this tutorial summarizes the relevant mathematical principles of the borehole deviation survey based on coordinate transform. For uncased or open holes, calculations of the azimuth-deviation-tool face rotation using three-component accelerometer and magnetometer measurements are summarized. For the steel-cased holes, calculations are based on the time-derivative formula of the coordinate transform matrix; yaw-pitch-roll angles through time are mathematically determined by integrating the threecomponent angular velocity measurements from the gyroscope while also removing the Earth's rotation effect. Sensor and data fusion to increase the accuracy of borehole deviation survey is explained with an example of the method. These principles of borehole deviation surveys can be adapted for attitude estimation in air-borne surveys or for positioning in tunnels where global positioning system (GPS) signals cannot be accessed. Information on the optimization filter that must be incorporated in sensor fusion is introduced to help future research.

• Food Science of Animal Resources
• /
• v.24 no.1
• /
• pp.50-56
• /
• 2004

The wienner sausage(natural casing, N), wienner sausage(collagen casing, C), frankfurter sausage(F) and can products[spam(S), luncheon meat(L), jangjorim(J)] were obtained from different Korean meat processing companies and investigated for their salinity, saccharinity, pH, moisture and fat content, meat color and sensory evaluation. In sausage products, the saccharinity percent ranged 4.9∼5.0 in N, 6.6∼8.0 in C, and 5.2∼6.5 in F. The salinity percent of C and F were slightly higher than that of N. The pH values of all sausage product were above 6.0. The L＊ values of N were ranged 49.8∼56.7, which were slightly lower than those of C and R The sausage with high content of crude fat and high L＊value earned the highest score in overall acceptability. In can products, saccharinity percentage was higher in J compared to the S and L. The salinity percentage of S was slightly higher than those of Land J. In meat color, L＊ and a＊ values were not different between S and L, although b＊ value of L was slightly higher than that of S and J. There were not significantly different among can products, however, the product containing low-salt had the highest score in overall acceptability.

• Cartoon and Animation Studies
• /
• s.32
• /
• pp.245-261
• /
• 2013

This paper analyzes films by director Tarsem Singh in relation to the theory of the sublime. The medium of film works in dimensions of both spectacle and narrative. Tarsem's strength mainly comes from spectacle. The visual style of Tarsem is unique and undeniably beautiful, but in a strange and magnificent way, rather than sweet and pleasant. If you accept the premises of Kant and Lyotard that the beautiful is a positive pleasure and the sublime is a negative pain, Tarsem's spectacle is certainly closer to the sublime than the beautiful. The Fall proves the director's ability in both spectacle and narrative. The spectacle of this film is so overwhelmingly huge, and vivid, it easily surpasses spectators' maximum capacity of imagination, which leaves the spectators in awe. Spectacle tends to hinder thinking thus obstruct the flow of narrative, but at the same time it blocks rational suspicion about the narrative. The spectacle of the Fall works as the power to immerse the spectators into the internal logic of the film. Since the spectators are deeply moved by the spectacle, they willingly follow the narrative of the film, the tragic adventure of the heroes which again gives the audience deep catharsis.

• Korean Journal of Food Science and Technology
• /
• v.43 no.4
• /
• pp.513-517
• /
• 2011

The effects of nonthermal plasma treatments against Salmonella Typhimurium, Escherichia coli O157:H7, and Listeria monocytogenes living on polystyrene (PS), sausage casings, and smoked salmon were investigated. Inoculated PS, casings, and salmon were treated with nonthermal plasma generated with helium (5 L/min) or with both helium (5 L/min) and oxygen (100 mL/min) at 60 Hz and 30 kV/cm for 2, 5, or 10 min. S. Typhimurium exhibited the highest sensitivity to the helium-used treatment. The greatest reduction (3.9${\pm}$0.8 log$CFU/cm^2$) was observed with L. monocytogenes on PS after the treatment with the mixed gas for 5 min. The treatment with the mixed gas inhibited L. monocytogenes on casings and salmon by 0.5${\pm}$0.3 log$CFU/cm^2$ and 1.0${\pm}$0.3 log CFU/g, respectively. Different treatment times did not result in different reductions of L. monocytogenes on both casings and salmon. The types of treatment gas and material of contamination need to be considered for evaluating the antimicrobial effects of nonthermal plasma treatments.

• The Journal of the Korea Contents Association
• /
• v.19 no.12
• /
• pp.615-622
• /
• 2019

Recently, reports of cruel group sexual assault in India have been frequently reported. The most prominent group sexual assault incident in India was a medical student, Joti Singh case, that six men raped her and damaged her genitals and organs on a bus and caused her death in 2012. This incident led to the launch and passage of a strong punishment bill including death penalty for sexual assault. But since then, sexual assault is still on the rise. As a result of examining the relations with regional characteristics centering on the areas where sexual assaults occurred, it was found that most of the cases of group sexual assault reported in the media occurred in the mid-north of India, and this was consistent with the region of the Hindu stressed region. If so, it can only be concluded that Hindu fundamentalism, in which female neglect is severe, is the cause. Hindu fundamentalists try to revive the traditional values of women with a strong retroism tendency. In Indian society, women are still at risk of collateral damage. The pursuit of Hindu fundamentalism by the ruling party and political leaders will require much more time to improve the women's social status and human rights.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.3 s.49
• /
• pp.85-100
• /
• 2006

This paper proposes an optimal design method of linear viscous dampers for the seismic performance of two adjacent structures with different heights. Accordingly, connection method using diagonal bracing between two floors and connection method between two structures are considered, and the effectiveness of the latter method is confirmed through the comparison of the frequency response functions with respect to damping capacity. Moreover, optimal damping to minimize the response of the adjacent structures in the frequency domain is found. The sensitivity of natural frequency and modal damping according to the damper capacity at each floor is obtained for the optimally designed system. From the sensitivity analysis, the modal damping is evaluated to be very sensitive to the damper installed at higher floor. Therefore, sensitivity-based damping distribution method is proposed. Diagonal bracing connection method, uniform distribution method and sensitivity-based distribution method are compared to each other in terms of seismic performance. The comparative results demonstrate that the proposed method is an effective seismic design method for the adjacent structures.

• The KIPS Transactions:PartA
• /
• v.18A no.2
• /
• pp.45-52
• /
• 2011

In the past, a patient went to the room where an ultrasound image diagnosis device was set, and then he or she was examined by a doctor. However, currently a doctor can go and examine the patient with a handheld ultrasound device who stays in a room. However, it was implemented with only fundamental functions, and can not meet the high performance required by the focusing algorithm of ultrasound beam which determines the quality of ultrasound image. In addition, low energy consumption was satisfied for the mobile ultrasound device. To satisfy these requirements, this paper proposes a high-performance and low-power single instruction, multiple data (SIMD) based multi-core processor that supports a representative beamforming algorithm out of several focusing methods of mobile ultrasound image signals. The proposed SIMD multi-core processor, which consists of 16 processing elements (PEs), satisfies the high-performance required by the beamforming algorithm by exploiting considerable data-level parallelism inherent in the echo image data of ultrasound. Experimental results showed that the proposed multi-core processor outperforms a commercial high-performance processor, TI DSP C6416, in terms of execution time (15.8 times better), energy efficiency (6.9 times better), and area efficiency (10 times better).

• Economic and Environmental Geology
• /
• v.49 no.1
• /
• pp.63-75
• /
• 2016

The ratio of fractured reservoir is very high in oil & gas fields around the world. The demand of drilling technology for fractured reservoir is expected to increase continuously if oil and gas prices are economical. The purpose of the review study is to help operator or driller in selecting of proper drilling technology for preventing a lost circulation in the fractured formation. In order to achieve this goal, fractured reservoir(formation) they are classified into partial lost circulation formation and total lost circulation formation. In case of partial lost circulation formation, the drilling problem can be solved by using LCM(lost circulation material) mud additive and squeezing cement. For shallow depth, total lost circulation formation can be drilled safely and economically with casing drilling method. Also, for deeper depth, problems of total lost circulation in formation can be solved by applying mud cap, which is one of the drilling methods. This was confirmed through field application such as Italy's Medusa-1 field and Qatar's North field.