• Transactions of Materials Processing
• /
• v.8 no.3
• /
• pp.301-301
• /
• 1999

Austenitic stainless steels such as AISI 316L have been used in equipment in which fluid flows at high speeds which can induce cavitation erosion on metallic surfaces due to the collapse of cavities, where the collapse is caused by the sudden change of local pressure within the liquid. Usually AISI 316L is susceptible to cavitation erosion. This research focuses on developing a better material to replace the AISI 316L used in equipment with high speed fluid flow, such as impellers. The effects of Rare Earth Metal (REM) additions on the cavitation erosion-corrosion resistance of duplex stainless steels were studied using metallographic examination, the potentiodynamic anodic polarization test, the tensile test, the X-ray diffraction test and the ultrasonic cavitation erosion test. The experimental alloys were found to have superior mechanical properties due to interstitial solid solution strengthening, by adding high nitrogen (0,4%), as well as by the refinement of phases and grains induced by fine REM oxides and oxy-sulfides. Corrosion resistance decreases in a gentle gradient as the REM content increases. However, REM containing alloys show superior corrosion resistance compared with that of other commercial alloys (SAF 2507, AISI 316L). Owing to their excellent mechanical properties and corrosion resistance, the alloys containing REM have high cavitation erosion-corrosion resistance.

• Transactions of Materials Processing
• /
• v.17 no.8
• /
• pp.558-563
• /
• 2008

The initial strain, the applied stress exponent, the activation energy, and rupture time in AZ31 magnesium alloy have been measured in order to predict the deformation mechanism and rupture life of creep over the temperature range of 423-443K. Creep tests were carried out under constant applied stress and temperature, and the lever type tester and automatic temperature controller was used for it, respectively. The experimental results showed that the applied stress exponent was about 9.74, and the activation energy for creep, 113.6KJ/mol was less than that of the self diffusion of Mg alloy including aluminum. From the results, the mechanism for creep deformation seems to be controlled by cross slip at the temperature range of 423-443K. Also the higher the applied stress and temperature, the higher the initial strain. And the rupture time for creep decreased as quadratic function with increasing the initial strain in double logarithmic axis.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.19 no.4
• /
• pp.897-902
• /
• 2005

Internal deficiency of vital Qi is origination of cancer and root cause of its development from the viewpoint of traditional Chinese medicine(TCM). For about 40 years, China has developed a combined system of TCM and Western medical system in treatment of cancers, laying stress on the therapeutic principle of strengthening the body resistance and restoring normal functioning of the body to consolidate the constitution (Fu Zheng Pei Ben). According to the results of the latest clinical and experimental studies, Chinese medicine not only increases curative effectiveness, but also reduces the side effect caused by the toxic, radio and chemical treatment of cancer cases in the western medical system as well as various complications. Long-term taking Chinese herbal medicine prevents recurrence and metastasis of tumor, and heightens long-term curative effectiveness after western medical treatments. It also helps to relieve symptoms, improve the quality of life, and prolong life of terminal cancer patients who have already lost opportunities of western medical treatments. In addition, it can prevent and cure premonitory symptoms of cancer.

• Journal of Chest Surgery
• /
• v.24 no.10
• /
• pp.1011-1018
• /
• 1991

From September, 1985 to March, 1991, 33 patients under went thoracotomy for treatment of pulmonary aspergilloma with Pulmonary tuberculosis on the department of Thoracic and Cardiovascular Surgery, National Kongju Hospital. 1. There were 25 male and 8 female patients ranging from 19 to 57 years old [mean age, 36.2 years]. 2. Hemoptysis was the most common symptom [recurrent minor hemoptysis: 24cases, severe hemoptysis [200cc /day]: 4 cases, massive hemoptysis [600/day]: 4 cases]. 3. In the chest X-ray films, intracavitary fungus balls [air meniscus sign] were noted in 20 cases [61%] and upper lobe involvements were 29 cases [88%]. 4. All cases had a history of treatment with antituberculosis drugs under diagnosis of pulmonary tuberculosis for an average of 10 years and 2 months. 5. The most common indication for operation was hemoptysis [32 cases] - hemoptysis with total destroyed lung or lobe: 12cases, hemoptysis with open AFB [t-] cavity: 6cases, recurrent or massive hemoptysis: 14 cases. 6. The operative procedures was as follows - - - lobectomy . 16 cases, pneumonectomy: 8 cases, bilobectomy, segmentectomy, cavernoplasty and lobectomy with segmentectomy: each 2 cases, lobectomy with cavernoplasty: 1 case. 7. 6 complications appeared postoperatively which included empyema with BPF [2 cases], empyema [2 cases] and wound infection [2 cases]. In conclusion, surgical resection is the treatment of choice in the management of pulmonary aspergilloma associated pulmonary tuberculosis.

• Journal for History of Mathematics
• /
• v.27 no.3
• /
• pp.197-210
• /
• 2014

Species like insects and fishes have, in many cases, non-overlapping time intervals of one generation and their descendant one. So the population dynamics of such species can be formulated as discrete models. In this paper various discrete population models are introduced in chronological order. The author's investigation starts with the Malthusian model suggested in 1798, and continues through Verhulst model(the discrete logistic model), Ricker model, the Beverton-Holt stock-recruitment model, Shep-herd model, Hassell model and Sigmoid type Beverton-Holt model. We discuss the mathematical and practical significance of each model and analyze its properties. Also the stability properties of stationary solutions of the models are studied analytically and illustratively using GSP, a computer software. The visual outputs generated by GSP are compared with the analytical stability results.

• Journal of Biosystems Engineering
• /
• v.32 no.2 s.121
• /
• pp.69-76
• /
• 2007

This study was conducted to evaluate the sideways overturning stability of side loaded mini-forwarder. The model of a prototype was developed using a 3D CAD modeler and the performance was experimentally validated. The prototype model was run on the multibody dynamic analysis program, RecurDyn 6.0, to simulate motions when the model traversed over a circular bump on a inclined ground surface. The simulation was performed at a constant forward speed of 1.85 km/h under the loaded and unloaded conditions. The forward direction was also controlled to vary from 0 to 360 degrees with an increment of 10 degrees. Results of the simulation showed safe regions in which the mini forwarder could travel safely in terms of direction and slope of the ground. Even when the mini-forwarder was loaded by 20 logs of 3.6 m long and 12 cm diameter, it traveled safely within the ground slopes of 1 to 45 degrees by directions.

• Journal of Korea Foundry Society
• /
• v.29 no.5
• /
• pp.213-219
• /
• 2009

Optimum conditions for production of semi-solid Al-Zn-Mg alloy billets was carried out by the Taguchi design method. And, Al-Zn-Mg alloy billets contained Sc (free, 0.1 and 0.3 mass %) were fabricated at optimum conditions. Evolution of microstructure in semi-solid state was investigated through various liquid fractions, holding times and holding temperatures. The Al-Zn-Mg alloy billets reheated at $615^{\circ}C$ during 30min are grain growth and it was fractured due to increasing liquid fraction before quenching. And, during reheating up to $600^{\circ}C$, grain growth of Al-Zn-Mg alloy billets contained Sc (0.1 and 0.3 mass %) was not occurred in comparison with those of Al-Zn-Mg alloy without Sc. It was thought that $Al_3Sc$ phases have a pinning effect in grain boundary and Sc content of 0.1 mass% is able to inhibit grain growth effectively through reheating process.

• Journal of Korea Foundry Society
• /
• v.30 no.6
• /
• pp.235-240
• /
• 2010

The evolution of microstructure and phases of Mg-10Al-Mn alloy by cooling plate method during homogenization treatment have been investigated with metallographic analysis, scanning electron microscopy and energy dispersive spectroscopy. The ingots used for this experiment were prepared by cooling plate and homogenization heat treatment was performed at 300 and $400^{\circ}C$ for various holding times (0, 1, 4, 8 and 12h). The casting ingots were consisted of the fine grains and eutectic phases. And, these eutectic phases were dissolved into the matrix during homogenization treatment at $400^{\circ}C$ but the lower temperature (at $300^{\circ}C$) did not be.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.692-701
• /
• 2009

The use of vertical drain method to improve the soft soil ground has been continuously increased in Korea such as Busan New Port, Saemangeum reclamation project and so on in Korea. Especially PBD(Plastic Board Drain), one of the vertical drain, has been widely used due to the economic feasibility, construction compatibility and quality control. However in case of using PBD, discharge capacity reduction caused by creep deformation of the PBD filter, bending, kinking and so on can be occurred. Therefore the purpose of this study is to solve these problems by developing Deformation-Compatible Vertical Drain, DCVD which allows to deform with consolidation settlement without bending and kinking of vertical drain. In order to investigate the performance of DCVD developed in this study, discharge capacity test, centrifuge model test and complex discharge capacity test for both PBD and DCVD are performed and the results are compared.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.3
• /
• pp.301-307
• /
• 2002

A multilayer ceramic chip antenna with helical structure is analyzed to enhance the narrow bandwidth of conventional ceramic chip antennas. The simulations are performed by HFSS to verify the effects of structural parameters on impedance bandwidth. The multilayer ceramic chip antennas consist of a rectangular-parallelepiped ceramic body$({\varepsilon}_r=7.8,\; tan\; {\delta}=0.0043)$ and helical conductor patterns are embedded in the ceramic body using LTCC-MLC technology. 3D structure design of the multilayer ceramic chip antenna suitable for IMT-2000 (1,920~2,170 MHz) handset has been implemented, and experimental results are presented and discussed.