• Title/Summary/Keyword: 실 치수

Search Result 64, Processing Time 0.028 seconds

Ergonomic Evaluation of Refrigerator Design (냉장고 디자인의 인간공학적 평가)

  • 박재희;황민철;박세진;김명석
    • Archives of design research
    • /
    • v.14
    • /
    • pp.1-7
    • /
    • 1996
  • Designers often hesitate to decide the shape, size, and layout of a product. Though ergonomic principles and data are absolutely needed in this process, they don have enough guidelines to refer. For the refrigerator designers, they also are not convinced of their decision: the vertical position of the freezing and refrigerating rooms, the height of shelves, the shape of door-handle, etc. To support the refrigerator design, we applied several ergonomic methods to the evaluation of refrigerator. EMG was measured to evaluate the load of users lumbar muscle. Based upon the experimental EMG data, we developed a model to estimate the relative load corresponding to the height of refrigerator shelves. Two different layouts of a refrigerator, R/F and F/R styles, were compared with the model. A three-dimensional motion analysis method was used to evaluate the users motion of using a refrigerator. Ten door-handles with the different shapes and positions were evaluated by tracking the rotations of the users arm. Video protocol analysis was used to evaluate the user interface of a control panel in a refrigerator. Finally, we suggested several ergonomic design guidelines based on the facts found in this research and the anthropometric data of the Korean adults. The results of this study can be applied to the ergonomic design of refrigerators

  • PDF

Measurement of flood discharge verification from drones (드론을 활용한 홍수량 검증 측정)

  • Lee, Tae Hee;Lim, Hyeokjin;Kim, Soo Hong;Jung, Sung Won
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2019.05a
    • /
    • pp.74-74
    • /
    • 2019
  • 수문조사를 통한 유량자료는 물의 이수, 치수, 환경 등 홍수피해 방지, 수자원의 관리 및 계획을 위한 기초자료로 이용되고 있다. 하지만 예산, 인력, 안전 및 하천공사 등의 문제로 매년 모든 지점에서 유량 측정을 실시하지 못하는 어려움이 있다. 특히 홍수기의 태풍 등 큰 호우사상 발생 시 수위-유량관계 변화 검토가 필요하지만 홍수기 계획지점 이외 지점에서 측정은 위와 같은 문제로 어려움이 있다. 따라서 본 연구에서는 이런 문제점을 개선하기 위해 최소 인력이 단시간 간편하게 드론을 활용하여 유량을 측정할 수 있는 방법을 도입하였다. 드론을 활용한 유량측정방법은 드론 사진측량 개념에서 접근하였으며 드론 사진측량의 정확도는 다양한 분야에서 많은 연구를 통해 입증된 바가 있다. 본 연구의 대상지점은 중랑천 상류에 위치한 의정부시(신곡교) 지점에서 보급형 회전익 드론 (DJI, 팬텀4 pro)을 활용하여 검증 목적을 위해 측정하였다. 유량측정은 드론으로 촬영된 항공사진 상에서 지상에 위치확인 가능한 지상기준점(GCP, Ground Control Point) 4개점을 선점하고 RTK-VRS 장비를 이용하여 측량을 수행하였다. 항공사진 촬영은 드론을 일정높이의 공중에 정지되어 있는 호버링(Hovering) 상태에서 카메라 타임랩스 기능으로 3초 간격 하도 내 수표면을 촬영하였다. 항공사진 수표면에 유하하는 부유물의 3초 간격 이동위치와 GCP 자료를 활용하여 X, Y 좌표 분석을 통해 3초간 이동거리를 표면유속으로 산정하고 통수단면적을 적용하여 유량을 산정하였다. 이와 같이 드론 사진측량으로 산정된 유량과 일반적인 유량측정 방법을 통해 개발된 수위-유량관계곡선식과의 비교를 통해 드론을 활용한 유량측정 방법의 적용성을 확인하였다. 다만, 드론이라는 기계적인 장비의 한계로 야간, 바람 및 강우 등 환경적인 요인에 의해 측정의 제한이 있을 것으로 판단된다.

  • PDF

철의장 설계 전산 개발/적용

  • 임대청;이종범
    • Bulletin of the Society of Naval Architects of Korea
    • /
    • v.30 no.2
    • /
    • pp.44-52
    • /
    • 1993
  • 선박에 있어서 철의장품은 종류와 수량이 다양하고 형상이 불규칙하여 대부분의 사업장에서 설계 전산화가 이루어지지 못하고 있는 실정이다. 의장설계실에서는 이를 전산화하기 위하여 먼저 철의장품의 표준을 제정 및 극대화하고 설계작업절차와 물량의 흐름을 전산과 연계하여 체계화 및 표준화하였다. 또한 선박의 전구역에 설치되는 철의장품들을 관련 양식과 함께 국제표준을 근거로 BASICA CADDS, SURFACE DESING, SDDP(structural Design & Detailing Package) SOFTWARE를 이용하여 2차원(2-dimension) 및 3차원(3-dimension) 데이터베이스(database)화 하였으며 이를 POP-UP MENU를 이용, 쉽게 선택함으로써 모델링(modeling) 작업시수를 대폭 감소 시켰으며, 그래픽(graphic)에서 추출한 의장품의 데이터(data)를 의장품의 표준정보 FILE과 연계하여 라벨(LABEL) 및 치수(DIMENSION)를 기입하여 배치도를 추출하고 의장품의 제작, 설치, 계산 및 관리에 소요되는 설치도, 제작도 및 관련 보고서인 BOM(bill of material), PML(pallet material list), 의장제작품 LIST, COG(center of gravity), 관리점 등을 자동추출 및 관리전산망(PC-lan)과 연계할 수 있는 DECOM(철의장 전산설계 전용 package)을 89년에 개 발하여 의장설계에 적용하여 왔으며 ORACLE사의 RDBMS(relational database management system)를 도입하여 이를 보완하므로써 정보의 일관화 및 공유화가 가능하게 되었다. 그 결과 설계 M/H절감, 생산성 향상, 자재 및 관련 정보 전달에 혁신적인 변화 향상을 가져오게 되었다.

  • PDF

A Subminiature Antenna for Bluetooth Applications (블루투스용 초소형 안테나)

  • Park, Myoung-Shil;Chun, Ren;Bang, Jai-Hoon;Ahn, Bierng-Chearl
    • Journal of Korea Society of Industrial Information Systems
    • /
    • v.12 no.4
    • /
    • pp.119-125
    • /
    • 2007
  • In this paper, a miniaturized PCB-integrated antenna is proposed for bluetooth applications. The proposed antenna is a modified form of the printed inverted F antenna where the size reduction is achieved by employing the meander strip for the resonant length part of the radiator. The antenna dimension is optimized using the commercial electromagnetic software MWSTM. The designed antenna is fabricated by the standard photo-etching technique and its performance is measured. The fabricated antenna shows a bandwidth of 125MHz centered at 2.45GHz and a gail of -0.23dBi. The size of the proposed antenna is $9.65mm{\times}5.95mm$ corresponding to the 55 percent of the area of the existing printed inverted F antenna.

  • PDF

The Appearance-related Properties and the Mechanical Properties of Lyocell-interlining Bonded Fabric (리오셀직물 심지접착포의 외관적 성능과 역학적 특성)

  • Kim, In-Young;Song, Wha-Soon
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.30 no.12 s.159
    • /
    • pp.1683-1689
    • /
    • 2006
  • Precedent researches on lyocell are mostly on lyocell structure, characteristics, physical properties by finishing and dyeability, and the like; there are little cases of researches on interlining for lyocell clothes production. To serve as a base information helpful to select fusible interlining and improve the efficiency of sewing process considering the characteristics of lyocell, this study performed t-est, F-test toward to the difference in the appearance-related properties and the mechanical properties of lyocell-interlining bonded fabric in accordance with the characteristics of fusible interlining and lyocell face fabric. This study reached following conclusions. Drapability and Crease recovery of lyocell-interlining bonded fabric are influenced by the structure of fusible interlining; stiffness of lyocell-interlining bonded fabric, by the structure of fusible interlining and the yam number of lyocell face fabric. WT is influenced by the mixture rate and yam number of lyocell face fabric. RT is influenced by the yam number of lyocell face fabric; G, 2HG, 2HG5, by the structure(woven and non-woven) of fusible interlining; B, HB, by the weight, structure(woven and non-woven) of fusible interlining, and yam number of lyocell face fabric; WC, by the weight, structure of fusible interlining; RC, by the structure of fusible interlining; thickness, by the weight of fusible interlining and the yarn number of lyocell face fabric; weight, by mixture rate and yam number of lyocell face fabric.

Experiment of Discharge Supply Verification in River Experiment Center (하천실증연구센터 공급 유량 검증 실험)

  • Kim, Jong Min;Lee, Du Han;Kim, Sung Joong;Kim, Hyung Suk
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2018.05a
    • /
    • pp.77-77
    • /
    • 2018
  • 한국 건설기술연구원의 하천실증연구센터는 기존에 불가능했던 준 실규모 하천실험, 생태실험, 치수분야 대형 모형실험 및 하천관련 기준수립을 위한 치수분야 수요와 하천 구조물의 품질성능평가 등을 목적으로 설립된 대규모 하천실증연구센터이다. 안동 하천실증연구센터는 총면적 $193,051m^2$의 부지에 하천의 일반적인 형상을 갖고 있는 완경사, 급경사, 만곡수로가 있으며, 수리량 측정 실험을 위한 초음파 유속계, 프로펠러 유속계, 전자식 유속계 등의 유속 측정 장비를 보유하고 있고, Total Station, Lidar, RTK-GPS 등 지형 측량에 사용할 수 있는 장비들도 보유하고 있어, 하천관련 실험을 수행하기에 충분한 여건을 보유하고 있다. 하천실증연구센터는 2013년부터 내 외부활용에서 활용할 수 있도록 지원을 수행하였으며, 총 118건의 하천 수리 및 생태분야, 지반분야 등 다양한 토목분야의 연구자들이 하천실증연구센터를 방문하여 실험을 수행하였고, 국내 기관 및 대학뿐만 아니라 미국의 Iowa 대학, Idaho 대학, USGS, 네덜란드 Deltares, 프랑스 Irstea 등 외국의 대학 및 기관에서도 방문하여 실험 및 공동연구를 수행하였다. 안동 하천실증연구센터의 활용 범위와 활용 건수가 지속적으로 증가함에 따라 자체적인 검토 및 외부의 의견에 따라 센터의 실험시설에 대한 개선이 필요한 사항이 발생하게 되었다. 하천실증연구센터의 수로는 기존의 지반위에 성토를 하여 인공적으로 건설하였기 때문에 일반적인 실내의 실험수로와는 다르게 하상에서의 침투가 발생하며, 이에 따라 하류방향으로 흐름이 진행될수록 유량의 변동이 발생하게 된다. 이에 따라 침투로 인해 발생하는 유량의 변동이 하도 유량 공급의 안정화에 미치는 영향에 대한 신뢰성 검증의 필요성이 필요하다고 판단되어 펌프에서의 유량 공급 및 하도내에서의 유량 안정화에 대한 검증 실험을 수행하고자 한다. 유량 공급에 대한 검증 실험은 크게 두 단계로 구성하였다. 첫 번째 단계는 펌프의 유량 공급에 대한 검증실험을 수행하고, 두 번째 단계에서는 동일한 조건내에서 하류의 지하수 수심, 공급수조의 수심, 하도내의 수심과 ADV 및 ADCP로 측정된 유량과의 관계를 통해 하도내의 유량이 얼마나 일정하게 공급되고, 하류방향으로 갈수록 유량 손실의 경향에 대한 실험을 계획하였으며, 전체적인 실험은 장기적으로 각 수로에 대하여 수행하는 것을 목표로 하였으며, 본 실험단계에서는 완경사 수로를 대상으로 하였다.

  • PDF

Study of the Saemangeum District Flood Level after Completion of Saemangeum Master Plan (새만금종합개발계획 완료 후 새만금 지구 홍수위 검토)

  • Jeong, Seok Il;Ryu, Kwang Hyun;Lee, Seung Oh
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2018.05a
    • /
    • pp.248-248
    • /
    • 2018
  • 새만금 종합개발계획(정부, 2011)에 따른 내부개발의 완료시점은 2030년이며, 방수제 공사와 준설 등과 같이 만경강 및 동진강 유역 내 흐름을 변화시킬 수 있는 공사를 포함하고 있으므로 현재와 2030년의 하천 및 호의 수리특성은 다를 것이라 예상된다. 2030년까지 준설상황 등을 예측하여 반영하는 것은 사실상 불가능하기 때문에 새만금 종합개발계획에서 제시하고 있는 내부개발의 완료시점을 기준으로 홍수사상을 모의하였다. 새만금 호의 물리적인 변화는 수리특성의 변화로 이어질 수 있으며, 이는 상류지역으로 전파가 될 수 있으므로 호내 뿐만 아니라 만경강과 동진강 전역에 대한 홍수시의 수리특성을 검토하였다. 새만금 호와 연결된 만경강과 동진강의 설계홍수량은 대부분의 구간에서 100년 빈도이기 때문에 본 연구에서는 100년 빈도 홍수사상에 대한 분석을 기초로 홍수위 검토를 수행하였고, RCP8.5 시나리오를 적용한 100년 빈도 홍수량과 500년 빈도 홍수량에 대한 추가적인 연구를 수행하였으며, 이 결과를 토대로 취약지구 분석 및 대책 등을 제시하였다. 수치모의는 Delft3D를 이용하였으며, 새만금 유역의 동진강 지구의 실측치와 비교함으로써 모델의 적용성을 검증하였다. 서해안 조위 특성상 새만금 방조제는 조위 영향이 크므로, 이에 본 연구에서는 외조위의 특성을 고려하기 위해 새만금 유역 주변의 12개 조화상수(tidal harmonic constant)를 이용하여 조위에 대한 모의를 별도로 수행하고, 이 결과를 배수갑문의 경계조건으로 이용하였다. 상류 경계조건은 하천기본계획상에 제시된 하천은 이를 이용하였으며, 그 외의 소하천은 유역면적을 이용한 계산법을 사용하여, 선형적 면적 비유량(Specific Discharge, SD) 방법을 적용하여 본류의 유량에 부가하는 방식으로 수행하였다. 수치해석 결과, 준설 구간의 수위는 전반적으로 저하되었으며, 거리에 따른 수면의 경사를 분석한 결과 기존의 하천구역이 준설 등으로 인하여 호수의 특성으로 변화된 것으로 확인하였다. 본 연구에서 취약지구는 홍수위가 제방고의 약 80% 이상 되는 지역으로 결정하였으며, 이를 토대로 취약지구 분석을 수행한 결과 기존 100년 빈도에서 1지점, RCP 8.5 시나리오가 적용된 100년 빈도에서 88지점, 500년 빈도에서 125지점이 잠재적인 치수 위험이 있는 것으로 파악되었다. 기존의 1차원 연구결과와는 차이가 있는 부분은, 다수의 취약지구가 만곡부 또는 합류부 인근에 위치한 것이다. 향후 이러한 상대적인 치수 취약지점에 대해 정밀하고 국부적인 연구를 수행하여 정확한 홍수위 예측을 수행해야 할 것이다.

  • PDF

The Change of Health Service before and after the Unification of two Health Subcenters in a Rural Area (한 농촌지역 2개면 보건지소 통합전후 보건의료사업 변화 연구)

  • Sul, Sue-Jeong;Park, Hyang;Sohn, Seok-Joon;Park, Jong;Kim, Ki-Soon
    • Journal of agricultural medicine and community health
    • /
    • v.25 no.2
    • /
    • pp.427-440
    • /
    • 2000
  • A comparative study was made about health resources, medical care service statistics and public health service statistics by health subcenters at Jangdong and Jangpyung townships, Jangheung County, Chollanamdo before and after the unification of two health subcenter to improve their function. 1. While two general physicians, one dentist, 4 nurse aids arid one oral hygienist were working at two health subcenters with simple facility with examination room and public health office in 1997 prior to the unification, in 1999 after the unification of two health subcenters 14 staff including a specialist physician, a general physician, a dentist, a herb hygienist, a radiology technician and a physical therapist were working in the new health subcenters equipped with appropriate facilities in two storey building. 2. In 1997 before the unification the yearly total income of two health subcenters was 78,815 thousand won(about 14,000 won per capita) and the amount was 140,376 thousand won(about 25,000 won per capita) in 1999 after the unification. And the income was used for operation of health subcenters excluding personnel expense. 3. While 90.5% of visitors to the health subcenters came for general medical care, and 91.6% came for the revisit before the unification, after the unification 71.2% came for general medical care, 10.8% for dental care, 16.5% for oriental physician's care, 29.7% for the first visit and 70.3% for revisit. Most common problem cared for was musculoskeletal disorder like arthralgia. Average treatment cost per person per month was 9,363 won before the unification and 8,309 won after the unification. 4. Through the comparison of execution rate of public health services before and after the unification. the practice rate of most health service among target population including visiting service for chronic illness, maternal and child health service and immunization service increased after the unification. The practice rate of tuberculosis control service, hypertension control and diabetes management was a little decreased. In conclusion, continuous effort to satisfy all persons in two townships and evaluation are necessary to coincide with the spirit of unification of two health subcenters.

  • PDF

Estimation of flood peak discharge using flood marks (홍수흔적을 이용한 첨두홍수량 추정)

  • Lee, Tae Hee;Lee, Jung Hoon;Kang, Jong Wan;Roh, Youngsin
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2019.05a
    • /
    • pp.75-75
    • /
    • 2019
  • 첨두홍수량 자료는 홍수예경보 및 치수계획수립 등 하천관리에 있어서 매우 중요한 요소이다. 그러나 대규모 홍수가 발생 시 악천후가 동반된 기상상황이나, 현장 접근이 어려운 환경적 조건과 예산 및 인력 부족 등에 의한 불가피한 문제로 첨두홍수량을 측정하는데 어려움 있다. 따라서 일반적으로 수위-유량관계곡선식을 이용하여 첨두홍수량을 산정하지만 단순 고수위 외삽 추정을 통해 개발된 곡선식을 이용한 첨두홍수량 산정에 있어서는 주의가 필요하다. 이러한 경우 홍수가 지나간 후 현장조사를 통해 획득한 위치, 표고, 횡단면적 등 홍수흔적(flood marks)을 가지고 경사면적법(slope-area method)과 같은 간접적인 방법으로 첨두홍수량을 추정할 수 있다. 본 연구에서는 2018년 큰 호우사상이 발생한 내성천의 지류인 서천의 영주시(월호교) 지점과 남강의 산청군(하촌리) 지점에서 홍수흔적 조사를 통해 지점별 두 개의 단면을 선정하였다. 영주시(월호교) 지점의 두 단면 간 거리는 약 90m, 높이차는 약 0.21m로 조사되었고, 산청군(하촌리) 지점의 두 단면 간 거리는 약 330m, 높이차는 약 0.47m로 조사되었다. 경사면적법을 이용한 첨두 홍수량 추정에 적용된 조도계수는 '서천 하천기본계획(2014)', '남강 하천기본계획(2013)'에서 계획 홍수량 산정에 적용된 조도계수 0.029와 0.025를 적용하였다. 영주시(월호교) 지점은 2018년 9월 4일 발생한 호우사상의 첨두수위 5.59m에서 수위-유량관계곡선식을 이용하여 산정된 유량은 $1,127.8m^3/s$이고 경사면적법을 이용하여 추정된 유량은 $1,105.9m^3/s$로 약 -1.98%의 편차율이 발생하였다. 산청군(하촌리) 지점은 2018년 8월 26일 발생한 호우사상의 첨두수위 6.75m에서 수위-유량관계곡선식을 이용하여 산정된 유량은 $3,435.0m^3/s$이고 경사면적법을 이용하여 추정된 유량은 $3,233.3m^3/s$로 약 -6.24%의 편차율이 발생하였다. 경사면적법을 이용하여 추정된 첨두홍수량은 수위-유량관계곡선식을 이용하여 산정된 유량과 편차율이 지점별 ${\pm}10%$ 이내의 근사한 범위로 산정되었다. 따라서 경사면적법을 이용한 첨두홍수량 추정 방법의 적용에 있어서 적절한 것으로 판단된다.

  • PDF

Assessment of Dental Noise Environment of a Pediatric Dentist (소아치과의사의 치과 소음 환경에 대한 평가)

  • Cho, Hyeonmin;Kim, Ik-Hwan;Cho, Seunghyun;Song, Je Seon;Lee, Jaeho
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.48 no.2
    • /
    • pp.209-220
    • /
    • 2021
  • The noise is defined as unwanted sound that causes discomfort and physical changes. This study was conducted to evaluate intensity of noise in the pediatric dental clinic and to investigate noise environment of a pediatric dentist. Human ear shaped microphone and mobile noise level meter were used for recording noise and calculating intensity of noise. By recording according to the method specified by Korea Occupational Safety and Health Agency (KOSHA) of Korea Ministry of labor and employment, the following results were obtained. For 16 experimental days, 8 hour time weighted average (8hr-TWA) was 49.33 dBA (A-weighted deci-Bell) on daily average with maximum 58.54 dBA and minimum 33.97 dBA. And Dose was 0.49% on daily average with maximum 1.28%, minimum 0.04%. These values are less than criteria of KOSHA standard (85 dBA, 100%). Comparing the highest noise level for each patient, pulp therapy group and Frankel grade I group were the highest. The intensity of dental noise of pediatric dental clinic didn't meet standard of KOSHA. It is necessary to re-evaluate noise environment by establishing new standards considering environment of pediatric dental clinic.