• Journal of the Korean Professional Engineers Association
• /
• v.19 no.2
• /
• pp.10-20
• /
• 1986

This paper describes a countermeasure of electric utilities and customer equipment in order to minimize an effect of sensitive electrical and electronic equipment on the voltage disturbances. After being studied, some schemes to solve were discovered. Firstly, in the electric utilities, the reduction of frequency and influence of voltage drop's time are not easy to realize because of the standpoint of effect and economy. Secondly, in the customer equipment, there are some equipment to minimize the voltage disturbances, Such as an UPSs, a noise suppressors and a power conditioners. One of them should be established on the computer control and automated systems, the electromagnetic switch of delay-release type should be adopted on the electromagnetic switch, the controlling circuit should be adopted on the variable speed motors which is being considered a countermeasure for a momentary under-voltage drops, the luminaire adhering a instantaneous restrike device should be adopted on the HID lamp. And also, the scheme of extending a setting time of relay on the undervoltage relay and the forming method of sequence which is automatic reclosing at this time of instantaneous suspension of an electric supply have been studied.

• Archives of design research
• /
• v.18 no.2 s.60
• /
• pp.59-68
• /
• 2005

This research suggests the direction realizing design business which means that designers overcome traditional role of passive design development and pursue active and subjective design development and eventually accomplish high profit by various sources except design development fee. For this, designers should be able to suggest highly successful design alternatives not by performing subjective aesthetic process but objective and scientific design development process through market-oriented information seeking, scientific design development and effective design management etc. In addition, designers should cultivates design business mind maximizing profit by various sources such as royalty, management fee and commission fee through exercising ownership, or participating distribution process and for outsourcing tasks. Regarding companies' side, they need to overcome existing manufacturing-based business paradigm focusing on rather material development, R&D, facility establishment than design or marketing, and to build design-centered business management system which menas the prior investment in design including needs identification of consumers.

• Journal of Energy Engineering
• /
• v.21 no.4
• /
• pp.325-338
• /
• 2012

Currently, there are the technologically urgent needs of fabricating the hyper coal (HC) based on the approach to extracting mainly effective organics from low rank coals (LRCs), because some industrial countries pursue global sustainability dealing with hot issues such as local energy supply security as well as global warming. In this study, as of the fabrication of clean HCs via LRCs upgrading, we comprehensively review the R&D status of two solvent extraction technologies, namely, Ohm heating (OH) and microwave irradiation (MI) extraction processes on the basis of the performance indicator such as a HC extraction yield.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2506-2514
• /
• 2011

The research object is stepwise process of absorptive capacity is important factor to get the successful result of technology commercialization training program. We analyze the relationship between absorptive capacity and educational performance with empirical study to the students who attended the technology commercialization training program. Results show that potential absorptive capacity has positive effect on realized absorptive capacity. Realized absorptive capacity also has the positive effect on educational performance. We conclude the successful technology commercialization training program is based on the stepwise process of absorptive capacity. That means technology commercialization training program will set up based on not functional but stepwise process. Further more, technology commercialization training program must be practical, focusing, interdisciplinary, and repetitive courses.

• The Journal of the Korea Contents Association
• /
• v.15 no.10
• /
• pp.468-480
• /
• 2015

The FTA between South Korea and China has been concluded in 2014. This means that there is high possibility of the economic integration in Northeast Asia. China's rapid growth has led the global economy, and the Northeast Asia has been attracting attention as the main market. Although the South Korean government cannot help continuing the overseas market-oriented policies, South Korea's construction orders in the Northeast Asia are insignificant, and their profitability is still low. It is time for South Korean construction industry to promote qualitative growth instead of quantitative growth. South Korean construction industry have to focus more on quality management to produce high-quality construction output. In order to support South Korean construction industry, Korean government needs to provide more advanced national quality management system. Therefore, this study compares national quality management systems in South Korea, Japan, and China, and suggests the direction of the South Korean national quality management system reform. In addition, another objective of this study is to confirm the importance of an ISO9001 based quality management system as a basis of the economic integration in Northeast Asia.

• The Journal of the Korea Contents Association
• /
• v.15 no.1
• /
• pp.152-158
• /
• 2015

The Korean Government said that it issued advance notice of the amendment of medical act article 34 on Oct. 29 of last year. Another issue at the heart of controversy in 2009 was telemedicine between doctors and patients for the purpose of helping those in the dead zone of medicine and supporting medical service industry. It failed, however, to enact legislation due to the strong opposition from medical profession as well as the apprehension about abuse of medical treatment and the rise of medical expenses. To amend and legislate a law, it is needed in advance to examine and analyze the rationality, propriety and feasibility of it. In particular, when it comes to amending a medical act, the validity should be acknowledged only when the right to life and health of the people is protected. Medical act article 34 is in the state of drift because of stiff resistance from medical and civic groups. This study purpose of analyze and to explain the amendment of recent proposition of Medical Act Article 34 and to suggest possible improvement methods.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.6
• /
• pp.27-33
• /
• 1984

This paper is an experimental gaudy on the digital hardware implementation of the R2-MF Receiver for 32 channel configurations used in signalling systems between ESS. There are many methods to detect MF signal by DSP techniques, but the requirement for MF detection needs not sharp frequency response, needs only decision about some specific frequencies exist or not at discrete frequency sampling points. The hardware used to implement this algorithm is Am 2900 series "bit-slice microprocessor" chips based on the microprogramming techniques for real time signal processing. And we used the additional Z-80A processor chips for the system control and the decision about which is the right MF signal from the detected MF spectrums. Hence we could enhance the flexibilities of the hardware and the software, this leads that this system is well suits for signalling systems used in TDM ESS.n TDM ESS.

• Journal of Information Technology Application
• /
• v.3 no.4
• /
• pp.63-92
• /
• 2001

This paper makes an attempt to look at the process of automatically generating an application software system based on the Entity-Relationship (E-R) model. Basically, the process consists of five steps as follows: First, the designer develops an E-R model of an real-world system. Second, the software generator automatically generates a stereo-type application system. Third, the generator produces database schema and link information between application programs. Fourth, the designer designs the user interface including menu, screen design and so on. Finally, the generator completes the process integrating all the elements of an application system. Five basic program generation rules, three extended rules and a database generation rule have been suggested. By following each rule with the generator, the designer can build an application with an extremely efficient manner compared with traditional approaches. A case study has been included in order to show the applicability of the automated software generation process suggested in this paper. It has been demonstrated from the case study that the idea of applying an automated generator in systems development based upon the E-R model worked well.

• Journal of Digital Convergence
• /
• v.15 no.8
• /
• pp.137-144
• /
• 2017

Recently, cyber resilience has emerged as an important concept, recognizing that there is no perfect security. However, domestic researches on cyber resilience are insufficient. In this study, the 22 indicators for cyber resilience assessment were initially developed by the literature survey and discussions with security experts. The developed indicators are reviewed using the Focus Group Interview method in terms of materiality and feasibility of the indicators. This study derived meaningful and useful indicators for the assessment of cyber resilience, and it is expected to be used as a foundation for the future cyber resilience studies. In order to generalize and apply the results of this study in practice, it is necessary to carry out quantitative researches in the future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.6
• /
• pp.929-934
• /
• 2018

The Internet of Things (IoT) is the network of devices embedded with electronics, software, sensors, actuators, and connectivity which enables these objects to connect and exchange data without any human intervention. The importance of time information is increased in order to impose order on scattered sensor data streams, resolving conflicts through time stamp information and so on. Time information and time synchronization are critical building blocks in the IoT. They allow devices to share a consistent notion of time and it is easier to build efficient and robust collaborative services. This paper proposes a standard time management scheme in the Internet of Things. Many IoT applications involve collection and forwarding of event data. It is useful to know when an event occurs for the purposes of triggering an action. In order to verify the feasibility of the proposed scheme, it is implemented and evaluated in the Arduino development environment.