• Science of Emotion and Sensibility
• /
• v.5 no.4
• /
• pp.59-66
• /
• 2002

This study was proposed as an exploratory study for understanding the biological bases and structures of three personality models: Eysenck's PEN model, Gray's BIS/BAS model, and Costa & McCrae's Five Factor Model, which was chosen as the major descriptive model regardless of its biological bases. Besides, Eysenck's impulsivity scale, IVE, was added to demonstrate the relationship of P and impulsivity. Concerning personality, most previous reports have explored the relationships between P300 and the introversion-extraversion of Eysenck's theory because of its putative biological bases. In the present study, forty-eight undergraduate took four personality batteries (ERQ-R, NEO-Pl-R, BIS/BAS, and IVE). Two types of oddball tasks including different stimulus duration were used to induce ERPs (50ms for task 1, 300ms for task 2). Distributional topographies of correlation coefficients with personality traits and ERP components were drawn, and considered for the consistent interpretation of the personality model structures. Even though all equivalences for extraversion of personality batteries showed similarities for their intra-correlation, their correlations with P3 amplitudes were dissociate. Eysenck's E might not be the proper psychometric measure for elucidating its biological bases. The present study supported the negative relationship of P3 amplitude and extraversion, which is the consensus of previous studies. Neuroticism and Psychoticism showed correlations with the earlier sensory processing components such as N1 and P2. This result might explain the reason why most of studies have failed to find biological connections relating them. Interaction between gender and personality traits should be considered for the interpretation of correlations. Two types of auditory stimulus duration had different sensitivity to personality traits.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_2
• /
• pp.1509-1521
• /
• 2020

Experiments for validation of surface reflectance produced by Korea Multi-Purpose Satellite (KOMPSAT-3A) were conducted using Chinese Baotou (BTCN) data among four sites of the Radical Calibration Network (RadCalNet), a portal that provides spectrophotometric reflectance measurements. The atmosphere reflectance and surface reflectance products were generated using an extension program of an open-source Orfeo ToolBox (OTB), which was redesigned and implemented to extract those reflectance products in batches. Three image data sets of 2016, 2017, and 2018 were taken into account of the two sensor model variability, ver. 1.4 released in 2017 and ver. 1.5 in 2019, such as gain and offset applied to the absolute atmospheric correction. The results of applying these sensor model variables showed that the reflectance products by ver. 1.4 were relatively well-matched with RadCalNet BTCN data, compared to ones by ver. 1.5. On the other hand, the reflectance products obtained from the Landsat-8 by the USGS LaSRC algorithm and Sentinel-2B images using the SNAP Sen2Cor program were used to quantitatively verify the differences in those of KOMPSAT-3A. Based on the RadCalNet BTCN data, the differences between the surface reflectance of KOMPSAT-3A image were shown to be highly consistent with B band as -0.031 to 0.034, G band as -0.001 to 0.055, R band as -0.072 to 0.037, and NIR band as -0.060 to 0.022. The surface reflectance of KOMPSAT-3A also indicated the accuracy level for further applications, compared to those of Landsat-8 and Sentinel-2B images. The results of this study are meaningful in confirming the applicability of Analysis Ready Data (ARD) to the surface reflectance on high-resolution satellites.

• Journal of Korea Water Resources Association
• /
• v.52 no.11
• /
• pp.917-929
• /
• 2019

Denitrification in streams is of great importance because it is essential for amelioration of water quality and accurate estimation of $N_2O$ budgets. Denitrification is a major biological source or sink of $N_2O$, an important greenhouse gas, which is a multi-step respiratory process that converts nitrate ($NO_3{^-}$) to gaseous forms of nitrogen ($N_2$ or $N_2O$). In aquatic ecosystems, the complex interactions of water flooding condition, substrate supply, hydrodynamic and biogeochemical properties modulate the extent of multi-step reactions required for $N_2O$ flux. Although water flow in streambed and residence time affect reaction output, effects of a complex interaction of hydrodynamic, geomorphology and biogeochemical controls on the magnitude of denitrification in streams are still illusive. In this work, we built a two-dimensional water flow channel and measured $N_2O$ flux from channel sediment with different bed geomorphology by using static closed chambers. Two independent experiments were conducted with identical flume and geomorphology but sediment with differences in dissolved organic carbon (DOC). The experiment flume was a circulation channel through which the effluent flows back, and the size of it was $37m{\times}1.2m{\times}1m$. Five days before the experiment began, urea fertilizer (46% N) was added to sediment with the rate of $0.5kg\;N/m^2$. A sand dune (1 m length and 0.15 m height) was made at the middle of channel to simulate variations in microtopography. In high- DOC experiment, $N_2O$ flux increases in the direction of flow, while the highest flux ($14.6{\pm}8.40{\mu}g\;N_2O-N/m^2\;hr$) was measured in the slope on the back side of the sand dune. followed by decreases afterward. In contrast, low DOC sediment did not show the geomorphological variations. We found that even though topographic variation influenced $N_2O$ flux and chemical properties, this effect is highly constrained by carbon availability.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.2 no.2
• /
• pp.3-17
• /
• 1994

The inhibitory effect of sodium ion on the anaerobic degradation of food waste was studied by an anaerobic batch toxicity assay and inhibition model. The anaerobic degradation activity of food waste spiked with over $2g\;Na^+/L$ of sodium ion was severely inhibited at the initial stage of the exposure. The inhibition response of anaerobic microorganisms on the sodium ion estimated from the methane production was differed according to the concentration of sodium ion. The relative acclimation time(RAT) and methanation rate(RMR), defined as the ratios of initial lag time and maximum methane production rate of the sample spiked with sodium ion to the control. respectively, were used to evaluate the acclimation and inhibitory effects quantitatively on the anaerobic microorganisms. When sodium ion was increased from $2g\;Na^+/L$ to $20g\;Na^+/L$, the RAT was exponentially increased from 18.9 to 90. but the RMR was linearly decreased from 0.97 to 0.02. The effects of sodium ion for the maximum methanation rate, first order kinetic constant and ultimate methane production were well evaluated by a generalized nonlinear expression model. it could be described by the uncompetitive inhibition mode. The sodium ion concentration causing 50% inhibition of methanation activity was about $11g\;Na^+/L$, and the critical sodium ion beyond to compelete inhibition was 20 to $21g\;Na^+/L$. The presented results could be used to obtain the design or operation parameters of the anaerobic process treating food waste of high salt.

• Journal of the Korea Concrete Institute
• /
• v.19 no.4
• /
• pp.515-525
• /
• 2007

In this investigation, results of laboratory tests on four reinforced concrete flat plate interior connections with elongated rectangular column support which has been used widely in tall residential buildings are presented. The purpose of this study is to evaluate an effect of column aspect ratio (${\beta}_c={c_1}/{c_2}$=side length ratio of column section in the direction of lateral loading $(c_1)$ to the direction of perpendicular to $c_1$) on the hysteretic behavior under earthquake type loading. The aspect ratio of column section was taken as $0.5{\sim}3\;(c_1/c_2=1/2,\;1/1,\;2/1,\;3/1)$ and the column perimeter was held constant at 1200mm in order to achieve nominal vertical shear strength $(V_c)$ uniformly. Other design parameters such as flexural reinforcement ratio $(\rho)$ of the slab and concrete strength$(f_{ck})$ was kept constant as ${\rho}=1.0%$ and $f_{ck}=40MPa$, respectively. Gravity shear load $(V_g)$ was applied by 30 percent of nominal vertical shear strength $(0.3V_o)$ of the specimen. Experimental observations on punching failure pattern, peak lateral-load and story drift ratio at punching failure, stiffness degradation and energy dissipation in the hysteresis loop, and steel and concrete strain distributions near the column support were examined and discussed in accordance with different column aspect ratio. Eccentric shear stress model of ACI 318-05 was evaluated with experimental results. A fraction of transferring moment by shear and flexure in the design code was analyzed based on the test results.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.4
• /
• pp.101-114
• /
• 2008

Pressurized grouting is a common technique in geotechnical engineering applications to increase the stiffness and strength of the ground mass and to fill boreholes or void space in a tunnel lining and so on. Recently, the pressurized grouting has been applied to a soil-nailing system which is widely used to improve slope stability. Because interaction between pressurized grouting paste and adjacent ground mass is complicated and difficult to analyze, the soil-nailing design has been empirically performed in most geotechnical applications. The purpose of this study is to analyze the ground behavior induced by pressurized grouting paste with the aid of laboratory model tests. The laboratory tests are carried out for four kinds of granitic residual soils. When injecting pressure is applied to grout, the pressure measured in the adjacent ground initially increases for a while, which behaves in the way of the membrane model. With the lapse of time, the pressure in the adjacent ground decreases down to a value of residual stress because a portion of water in the grouting paste seeps into the adjacent ground. The seepage can be indicated by the fact that the ratio of water/cement in the grouting paste has decreased from a initial value of 50% to around 30% during the test. The reduction of the W/C ratio should cause to harden the grouting paste and increase the stiffness of it, which restricts the rebound of out-moved ground into the original position, and thus increase the in-situ stress by approximately 20% of the injecting pressures. The measured radial deformation of the ground under pressure is in good agreement with the expansion of a cylindrical cavity estimated by the cavity expansion theory. In-situ test revealed that the pullout resistance of a soil nailing with pressurized grouting is about 36% larger than that with regular grouting, caused by grout radius increase, residual stress effect, and/or roughness increase.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.8
• /
• pp.759-769
• /
• 2013

Electronic equipment has been applied to virtually every area associated with commercial, industrial, and military applications. Specifically, electronics have been incorporated into avionics components installed in aircraft. This equipment is exposed to dynamic loads such as vibration, shock, and acceleration. Especially, avionics components installed in a helicopter are subjected to simultaneous sine and random base excitations. These are denoted as sine on random vibrations according to MIL-STD-810F, Method 514.5. In the past, isolators have been applied to avionics components to reduce vibration and shock. However, an isolator applied to an avionics component installed in a helicopter can amplify the vibration magnitude, and damage the chassis, circuit card assembly, and the isolator itself via resonance at low-frequency sinusoidal vibrations. The objective of this study is to investigate the dynamic characteristics of an avionics component installed in a helicopter and the structural dynamic modification of its tray plate without an isolator using both a finite element analysis and experiments. The structure is optimized by dynamic loads that are selected by comparing the vibration, shock, and acceleration loads using vibration and shock response spectra. A finite element model(FEM) was constructed using a simplified geometry and valid element types that reflect the dynamic characteristics. The FEM was verified by an experimental modal analysis. Design parameters were extracted and selected to modify the structural dynamics using topology optimization, and design of experiments(DOE). A prototype of a modified model was constructed and its feasibility was evaluated using an FEM and a performance test.

• Journal of Korean Academy of Nursing
• /
• v.23 no.3
• /
• pp.417-430
• /
• 1993

이 연구는 환경적 요소(간호사의 자율성, 조직의 표준화)와 개인의 특성(통제위, 나이, 경험. 간호역할개념, 도덕성), 직무 스트레스, 윤리적 의사결정 사이의 관계를 이론적 틀을 구성하여 테스트함으로써 그 인과관계를 탐구하였다. 본 연구를 위해 개발된 모형은 1) Katz와 Kahn의 조직에 대한 개방체계 이론(open systems theory of organization) ; 2) Kahn. Wolfe, Quinn, Snoek의 스트레스 이론 (theory of stress) : 3) Kohlberg의 도덕발달 이론(theory of moral develop-ment): 그리고 4) 여러 문헌고찰을 기초로 하였다. 본 연구의 모형은 2가지의 주요 종속변수(직무 스트레스, 윤리적 간호행위), 2가지 매개변수(간호 역할개념, 도덕성 발달정도) 그리고 여러 독립변수들(조직의 표준화, 자율성, 통제위, 교육, 나이, 경험 등)로 구성되었다. 간단히 말해, 간호사의 스트레스와 윤리적 간호행위 를 개인 자신과 환경이라는 두 요소의 결과로 간주한 것이다. 미국(2개주)의 여러 건강관리기관에 근무하는 224명의 정규 간호사를 대상으로 하였고. 가설 검증을 위하여 1) 변수간의 인과관계를 조사하기 위한 Linear Structural Relationships(LISREL)기법과 2) 나이, 경험, 교육이 변수간의 관계에 미치는 중간역할을 알아보기 위해 상관분석을 이용하였다. LISREL결과를 보면 제시된 모델이 각 내재 변수에 상당한 설명력을 가지면서 자료에 잘 맞는 것으로 나타났다. 이 연구에서 가장 뚜렷한 점으로 나타난 것은 개인의 특성보다 환경적 요소로서의 자율성이 직무스트레스와 윤리적 의사결정을 예견하는데 훨씬 중요한 변수로 부각되었다는 점이다. 또한 간호사의 전문적 역할개념과 봉사적 역할개념이 간호사의 윤리적 의사결정을 예견하는 가장 중요한 요소로 나타났다. 중간영향(moderation effect)을 보면, 젊고 경험이 적은 간호사일수록 나이가 많고 경험있는 간호사보다 환경적 요소(자율성)에 더 큰 영향을 받는다는 것을 암시하고 있다. 또한 4년제 대학 이상을 졸업한 간호사의 윤리 적 간호행 위 는 2, 3년제 를 졸업 한 간호사 보다 환경적 요소에 의해 덜 영향을 받는 것으로 나타났다. 한편 자율성의 부족은 2, 3년제 졸업 간호사보다 4년제 졸업 간호사에게 더 심한 스트레스가 되고 있음을 시사하였다. 이 연구의 결과로부터 적어도 다음과 같은 두 가지 실제적인 제언을 도출할 수 있다. 첫째, 이 연구는 환경적요소로서의 자율성이 다른 어떤 개인적인 요소보다 직무 스트레스를 예견하는 데 중요한 요소라는 것을 제시하였다. 이것은 간호행정가들에게, 간호사의 직무 스트레스를 감소시키기 위해선 “자율성”이 아주 중요히 다루어져야 한다는 것을 의미한다. 만일 간호사들의 직무스트레스가 그 개인의 복지에 큰 해가 되고 환자를 간호하는 데 직접적으로 관계된다면, 간호행정가는 그 조직의 직무체계를 다시 평가해서 일에 대한 새로운 설계가 필요한지를 파악해야 한다. 또한 이 연구는 직무를 다시 설계할 경우, 누구에게 먼저 촛점을 두고 시작해야 하는지를 밝혀주고 있다. 즉, 젊고 경험이 미숙한 간호사들에게 촛점을 두고 시작해야 하며, 작업환경의 가장 중요한 차원중의 하나인 사회적 지원(social support)을 조심스럽게 고려해 보아야 한다. 둘째, 간호사의 윤리적 간호행위를 높히기 위해 전문적 역할개념과 봉사적 역할개념이 재강조될 필요가 있다. 이 두 역할개념 들을 교육을 통하여 효과적으로 가르칠 필요가 있다고 본다. 이 두 개념들이 간호사의 바람직한 간호행 위에 영향을 미치는 가장 중요한 요소로 나타났기 때문이다. 또한, 본 연구결과에 따르면, 경험이 많을수록 일에 싫증을 느껴 바람직한 윤리적 간호행위가 감소되는 경향이 있었다. 따라서, 건강관리체제 (health care system) 안에서의 간호사의 역할이-전문직으로서의, 그리고 환자를 위한 옹호자로서의-학교와 임상에서 효과적으로 교육되어져야 한다고 본다. 간호사들의 역할에 대한 계속적인 교육이 학생은 물론 임상 간호사들에게도 실시되어져야 할 것이다. 미래연구의 방향을 제시해 보면 첫째로 연구의 일반화를 높히기 위해 더 많은 대상자를 포함시켜야 한다. 이는 여러 종류의 표본을 반드시 한번에 전부 포함시켜야 한다는 것을 의미하는 것이 아니고, 특정한 여러 표본들을 연속적으로 연구함으로서 이 목표를 성취할 수 있다고 생각한다. 둘째는 여러 construct들(윤리적 간호행위, 직무 스트레스, 간호 역할개념 등)에 대한 적절한 측정도구를 개발해야 한다. 측정도구를 개발하기 위해서는 풍부하고 세세한 통찰력을 제공하는 질적인 정보를 얻는 것이 선행되어야 한다. 셋째, 윤리적 간호행위와 직무 스트레스에 관한 연구를 증진시키기 위해 실험설계 및 종단적 연구(expel-imental, longitudinal design)가 시도될 필요가 있다. 마지막으로, 윤리적 간호행위와 직무 스트레스를 예견할 수 있는 이론적 탐구(theoretical exploration), 즉 이론정립을 위하여, 환경적 요소와 개인의 특성에 대한 자세한 정보를 제공해 줄 수 있는 질적 연구들이 요구된다.

• Journal of Korean Society of Transportation
• /
• v.24 no.5 s.91
• /
• pp.35-44
• /
• 2006

Acceleration and deceleration curves have been used for design purposes worldwide. The curve in design level has been regarded as an single deterministic curve to be used for design of climb lanes. It should be noted that the curve was originally made using ideal driving truck and that the curve is applied during design based on the assumption of no difference between ideal and real driving conditions. However. observations show that aged vehicles and lazy behavioring drivers nay make lower performance of vehicles than the ideal performance. The present paper provides the results of truck speeds at climbing lanes then probabilistic variation of acceleration and deceleration corves. For these purposes. a study about identification of vehicle makers, and weights for trucks at freeway toll gates and then observation of vehicle-following speed were performed. The 85%ile results obtained were compared with the deterministic performance curves of 180, 200, and 220 Ib/hp. It was identified that the performance of 85%ile results obtained from vehicle-following-speed observations were lower than one from deterministic performance curves. From these results, it may be concluded that at the beginning Point of climbing lanes additional $16.19{\sim}67.94m$ is necessary and that at the end point of climbing lanes $53.12{\sim}103.24m$ of extension is necessary.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.1
• /
• pp.40-47
• /
• 2009

This paper presents the method of measuring the feedback interference channel, which is developed between the transmit and receive antennas of a wireless repeater by receiving the transmit signal at the receive antenna of the identical repeater, and experiment results obtained by analyzing the measurements. This experiment uses 2 GHz WCDMA signal and is carried out near a highway. The high-speed mobiles on highways cause reflected signals with high Doppler frequencies and large energy. In order to characterize the feedback channel, the power delay profile and the scattering function are estimated by identifying the delay spread, the Doppler spread, the number of fingers, and the attenuation with delay. Since the feedback interference channel is constructed between the fixed TX and RX antennas, which is dependent upon the multipaths developed by moving or fixed objects around the antennas, the channel shows different properties comparing to the conventional channels between the base station and the mobile station. Therefore, the results presented in the paper are expected to provide guidelines for designing and evaluating wireless repeater systems.