• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.4
• /
• pp.51-61
• /
• 2003

This research is a park of a research program to develope a new design method for reinforced concrete bridge columns under axial load and cyclic lateral load. The objectives of this paper are to investigate the relationship between curvature ductility and displacement ductility and to propose a correlation equation for designing of reinforced concrete bridge columns under axial load and cyclic lateral load. Computer program NARCC was used for parametric study, which was proved to provide good and conservative analytical result especially for deformation capacity and ductility factor compared with test result. A total of 7,200 spirally reinforced concrete columns were selected considering the main variables such as section diameter, aspect ratio, concrete strength, yielding strength of longitudinal and confinement steel, longitudinal steel ratio, axial load ratio, and confinement steel ratio. A new equation between curvature ductility factor displacement ductility factor with the aspect ratio was proposed by investigation of 21,600 data produced from the selected column models by applying 3 different definitions of yield displacement.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.205-213
• /
• 2007

Strength relationships are presented through experimental data from the concrete strength tests in this study. Various strength tests such as the compressive, flexural, and splitting tensile strength and the modulus of elasticity are included. An experimental work was performed to determine the various strength characteristics for various mix designs. Three different coarse aggregates such as granite, limestone, sandstone were used and included were fine aggregates such as natural sand, washed sand and crushed sand. Also included was cement amount as experimental variable. It was confirmed that each strength value with respect to curing time is to follow a typical strength development curve. With this somewhat reliable test results various strength relationships such as flexural strength-compressive strength, splitting tensile strength-compressive strength, modulus of elasticity-compressive strength, splitting tensile strength-flexural strength were analyzed through statistics. Experimental data were well fitted to the 0.5-power relationship of flexural strength and compressive strength which has been commonly accepted. The splitting tensile strength is expected to be best in the linear relationship from the flexural strength data. Finally splitting tensile strength was found to be proportional to the 0.87 power of the cylindrical compressive strength.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.503-506
• /
• 2008

본 연구에서는 하이드로포밍 공정을 적용한 엔진크레들 제품에 대해 최종 제품의 강도를 평가하고자 하였다. 먼저 적용 판재인 370과 440 소재에 대해 인장시험을 수행하여 소재의 경도와 강도의 상관관계를 분석하여 경도와 강도의 변환식을 도출하였다. 그런 다음 예비굽힘, 예비성형, 최종성형된 제품의 각 공정에 따른 유효변형률을 측정하고 같은 위치에서의 경도를 측정하였다. 측정된 경도는 앞서 도출한 경도와 강도의 변환식에 대입하여 각 공정을 마친 제품의 강도를 예측하고 결국 하이드로포밍된 엔진 크레들 제품의 유효변형률에 따른 강도를 예측식을 실험으로 도출하였다. 그 결과 예비굽힘, 예비성형, 최종성형을 마친 엔진 크레들 제품에 대해 유효변형률이 $24{\sim}72%$로 변하였고 이때 HF370의 경우에는 유동응력값이 $375{\sim}500MPa$로 증가하여 원소재에 비해 성형 후 $25{\sim}66%$의 강도증가량을 보였고, HF440의 경우에는 $470{\sim}565MPa$로 증가하여, 원소재에 비해 $17{\sim}41%$로 강도가 증가하는 것으로 나타났다. 그리고 이와 같은 변화값을 이용하여 유효변형률과 강도의 상관관계를 도출하였다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.520-525
• /
• 1998

난류혼합율에 대한 예측은 원자로의 노심 열수력 설계에 있어 매우 중요한 일이다. 봉다발 구조에서 난류혼합의 주요 원인으로 지목되고 있는 유동액동(flow pulsation) 현상에 대한 척도평가(scale analysis)틀 통해 봉다발 유동장을 흐르는 저 Prandtl 수 유채에 대판 난류혼합율 평가식을 유도하였다. 난류혼합에 기여하는 인자가 분자운동, 등방성 난류운동(유동맥동 효과률 배제한 난류운동), 그리고 유동맥동의 세 부분으로 구성되어 있다고 가정하고, 각각에 대한 길이 및 속도척도를 평가하여 난류혼합율을 유도하였다. 평가식에는 P/D, Re수 P${\gamma}$ 수 등의 인자가 고려되어 있어 다양한 기하학적, 수력학적 조건과 유체의 물리적 특성이 반영되어 있다. 유도원 난류혼합율 평가식을 실험 상관식과 비교하였으며, 비교 결과 만족스러운 것으로 나타났다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.6
• /
• pp.175-183
• /
• 2010

In this study, laboratory experiments are conducted to investigate flow-fields around floating breakwaters by using the LDV(Laser Doppler Velocimetry) system. The LDV system is a well-known equipment to measure fluid particle velocities in laboratory experiments. Although the system requires great efforts and enormous time for measurements, it can provide precise velocity fields comparing to other available equipments. Various types of drafts and shapes for breakwaters are employed in laboratory experiments to analyze a relation between flow-fields and vorticity. A series of numerical experiments are also carried out by using a two-dimensional Navier-Stokes equations model. Numerically predicted results are compared with laboratory measurements.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05b
• /
• pp.205-209
• /
• 1996

원자로 입구노즐에서 원자로 냉각재 펌프에 의한 맥동압력 준위를 원자로 하향통로와 저온 관을 상관시켜 예측하는 방법에 관하여 분석하였다. 원자로 하향통로에서의 맥동압력은 원자로 내부구조물의 건전성 평가에 쓰이는 중요한 인자로 이 값을 정확히 구하기 위해서는 경계조건인 입구노즐에서의 맥동압력을 정확히 예측해야 한다. 이를 위해 원자로 하향통로와 저온관을 상관시켜 원자로 입구노즐에서의 펌프에 의한 맥동압력 준위를 계산하였으며 Palo Verde Unit 1의 실험치와 비교 분석하였다. 분석 결과, 제시된 맥동압력 준위 예측모델은 500℉의 경우 비교적 잘 일치하였으나, 565℉의 경우 상당한 차이가 있었으므로 추가적인 검토 및 수정 작업이 요구된다.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2006.05a
• /
• pp.116-121
• /
• 2006

광범위한 지역의 자연환경 정보를 파악하기 위하여 위성 영상자료를 이용하는 것이 적합하지만 선행되어야 할 것은 이러한 위성영상자료를 이용하기 위한 지상에서의 내부 실험과 현장실험을 통한 기초적인 모델식을 만드는 것이 중요하다. 이를 위하여 위성영상자료와 실측수질인자들의 상관관계를 조사하는 것이 보다 정확하고 객관적인 평가 방법이 될 수 있다. 따라서 대기의 영향이 없는 실험실내에서 순수한 담수와 해수를 이용하여 Landsat ETM 영상자료의 어느 밴드가 클로로필a 농도파악에 적합한가를 평가하고자 하였다. 그 결과 밴드조합 중 가장 높은 상관관계를 보인 최적밴드는 담수에서 (83-B4)/B2이고, 해수에서는 (82+B4)/B3로 이 때의 상관계수가 각각 0.9747, 0.9892이므로 향후 이 밴드를 조합하여 위성영상 평가 시 사용하는 것이 유효할 것으로 생각된다.

• Journal of Korea Water Resources Association
• /
• v.53 no.10
• /
• pp.861-870
• /
• 2020

As the flow velocity and Reynolds number increase in rockfill porous media, the flow deviates from Darcy conditions. In this study, the permeability tests of rock column specimen and laboratory gabion weir model were carried out to investigate a head loss behaviour of flow through rockfill deposition in small river artificial recharge. Through column test, the nonlinear relationships between flow velocity and hydraulic gradient and coefficients were determined and the correlation formula of hydraulic mean radius and coefficients was proposed. The flow velocities and discharges in voids estimated by proposed equations were well matched with the measured values of laboratory gabion weir model.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1043-1052
• /
• 1996

Supercritical fluid chromatographic method was recommended as an alternative separation method of fatty acids of the conventional method such as distillation or extraction. Although diffusion characteristics are varied by the carbon numbers and the degree of unsaturation of fatty acids, the quantitative data were so rare that the commercialization of supercritical fluid chromatographic method has been hindered. In this study, diffusion coefficients of fatty acids which are differently unsaturated are measured by CPB method in the range of 308.15K to 328.15K and 13MPa to 17MPa in supercritical carbon dioxide. A decrease in the binary diffusion coefficient was observed with an increase in temperature and pressure. Also, the decrease in the binary diffusion coefficient with increasing fluid density and viscosity. Wilke-Chang equation, Funazukuri empirical equation, and Matthews-Akgerman equation are used to correlate the experimental diffusion coefficients of fatty acids in supercritical carbon dioxide. Among the various theoretical equations, Matthews-Akgerman equation based on RHS theory was suggested as a more successful correlation model with experimental data.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.6
• /
• pp.750-756
• /
• 2011

An experimental study was carried out to measure the heat transfer coefficient in flow boiling to deionized water in a microchannel having a hydraulic diameter of $500{\mu}m$. Tests were performed in the ranges of heat fluxes from 100 to 400 kW/$m^2$, vapor qualities from 0 to 0.2 and mass fluxes of 200, 400 and 600 kg/$m^2s$. From the experimental results, it is found that the measured heat transfer coefficients is independent of mass flux and quality, and is somewhat dependent of heat flux. Measured data of heat transfer are compared to a few available correlations proposed for macroscale. The previous correlations for macroscale overpredicted the flow boiling heat transfer coefficient for the test conditions considered in this work.