• Korean Journal of Culture and Social Issue
• /
• v.22 no.4
• /
• pp.595-622
• /
• 2016

This study aims to understand the process of family reunion of the ex-offenders. To this end, Korea Rehabilitation Agency under Ministry of Justice and Healthy Family Support Center conducted intensive interviews with ex-offenders, their families and with 8 counselors who are in charge of ex-offenders and their families' residential, psychological, and educational support. The data collected through the interviews were analyzed by Consensus Qualitative Research(COR). The followings are the results: the counselors found out that most of ex-offenders had experienced unhappy childhood which was lack of healthy relationship with their parents. Secondly, counselors noticed a common feature among the families of ex-offenders. The common feature was that they keep the fact that one of their parents was imprisoned to their children as a secret. Thirdly, through the data analysis, counselors could understand various factors that affect reunion of ex-offenders' families: the factors that helped successful reunion were ex-offenders' sense of responsibility, open and healthy communication among family members, and mutual understanding of being a good family member, whereas, irresponsible dependance to other family members, denier and avoidance from the family members against ex-offenders, and lost sense of being a family member were the factors that discouraged the reunion. It turned out that the kinds of crime that ex-offenders committed also affected family reunion. The processes of reunion were easier for those who served their time with fraud, embezzlement, whereas, it was much more challenging for those who served their time with rape, violence, or murder. Fourthly, counselors learned that "relaxation" is the key factor in the process of reunion of ex-offenders' families. They also emphasized that there should be thorough monitoring process before the intervention in the reunion process. This study contributes in terms of finding healthy ways of intervention with ex-offenders' families and developing programs that help ex-offenders to recover their relationship with their family.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.32 no.1
• /
• pp.16-22
• /
• 2023

Esthetic factors are very important in the success of maxillary anterior implant restoration. However, achieving esthetic results is difficult, especially in cases where periodontitis has resulted in severe alveolar bone loss. In the case of maxillary anterior teeth, the alveolar ridge resorption that begins immediately after tooth extraction interferes with the esthetic implant restoration. Therefore immediate implant placement can be performed to minimize the alveolar ridge resorption. However, in severe bone loss cases, immediate implant placement could result in esthetic failure, and this result might cause irreparable problems. We can also perform alveolar ridge preservation and then place implants later. On JCP published in 2019, there is the consensus of European academy of periodontology on the extraction socket management and the timing of implant placement. This consensus states that alveolar ridge preservation should be considered when there is severe labial bone loss in an esthetically important area such as maxillary anterior region. On performing the alveolar ridge preservation, we cannot obtain the primary wound closure, so secondary wound healing is induced with open membrane technique or soft tissue grafting should be performed for primary wound closure. However, the secondary wound healing can have a negative impact on bone regeneration, and soft tissue grafting such as FGG or CT graft can be burdensome for both patients and dentists. On the other hand, by using the granulation tissue in the extraction socket, primary closure can be achieved without soft tissue grafting. Also some studies have shown that granulation tissue in periodontal defects contains stem cells that may help in tissue regeneration. Based on this, implant restorations were performed on maxillary anterior teeth with severe alveolar bone loss by alveolar ridge preservation using granulation tissue. In spite of the severe bone defect of the extraction socket, relatively esthetic results could be obtained in implant restorations.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.2
• /
• pp.187-200
• /
• 2023

The purpose of this study is to examine how the start-up education, start-up support system, and start-up mentoring directly and indirectly conducted in universities affects entrepreneurial Intention, and to present programs and directions that can increase the possibility of start-up for college students. This study analyzed the effects of college students' satisfaction with university entrepreneurship education, awareness of the entrepreneurship support system, and entrepreneurship mentoring on entrepreneurial will, and then analyzed how entrepreneurship efficacy affects entrepreneurial will as a moderating effect. The recognition of the start-up support system was divided into the government start-up support policy and the university start-up support project, and start-up mentoring was divided into mentoring function (problem-solving function, networking function, communication function, motivation function) and mentor trust (cognitive trust, emotional trust). Regression analysis was performed on satisfaction with college entrepreneurship education, perception of entrepreneurship support system, entrepreneurship mentoring as independent variables, and willingness to entrepreneurship as dependent variables. In addition, entrepreneurship efficacy was designated as a moderating variable and analyzed. As a result of the study, first, it was found that satisfaction with start-up education had a positive (+) effect on college students' willingness to start a business. Second, among the start-up support systems, university start-up support projects were found to have a positive (+) effect on college students' willingness to start a business. Third, as a result of verifying whether entrepreneurial self-efficacy has a moderating effect on the relationship between college start-up support projects and college students' willingness to start a business while recognizing the start-up support system, it was found to have a moderating effect. The following implications can be derived based on the analysis results of this study. First, efforts to improve start-up education will be needed to increase the satisfaction of start-up education. Second, Through the operation of the start-up counseling center in the university, it will be possible to recognize the education system supported by the university, the university start-up support project that can carry out the indirect experience of start-up, and the government start-up support policy that supports funds. Third, It will be necessary to open a program that can provide start-up mentoring through connection with mentors in the start-up field, such as professors, employees, and senior start-ups in universities. Fourth, It is necessary to develop thorough education on the preparation process of start-ups, start-up special lectures where senior start-ups can indirectly experience the failure of start-ups, and programs for customized start-up education according to college students' major and individual tendencies.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.5
• /
• pp.17-32
• /
• 2023

The entrepreneurial activities of college students play a significant role in modern economic and social development, particularly as a solution to the changing economic landscape and youth unemployment issues. Introducing innovative ideas and technologies into the market through entrepreneurship can contribute to sustainable economic growth and social value. Additionally, the entrepreneurial intentions of college students are shaped by various factors, making it crucial to deeply understand and appropriately support these elements. To this end, this study systematically explores the importance and impact of role models through a multiple serial mediation analysis. Through a survey of 300 college students, the study analyzed how two psychological variables, growth mindset and entrepreneurial self-efficacy, mediate the influence of role models on entrepreneurial intentions. The presence and success stories of role models were found to enhance the growth mindset of college students, which in turn boosts their entrepreneurial self-efficacy and ultimately strengthens their entrepreneurial intentions. The analysis revealed that exposure to role models significantly influences the formation of a growth mindset among college students. This mindset fosters a positive attitude towards viewing challenges and failures in entrepreneurship as learning opportunities. Such a mindset further enhances entrepreneurial self-efficacy, thereby strengthening the intention to engage in entrepreneurial activities. This research offers insights by integrating various theories, such as mindset theory and social learning theory, to deeply understand the complex process of forming entrepreneurial intentions. Practically, this study provides important guidelines for the design and implementation of college entrepreneurship education. Utilizing role models can significantly enhance students' entrepreneurial intentions, and educational programs can strengthen students' growth mindset and entrepreneurial self-efficacy by sharing entrepreneurial experiences and knowledge through role models. In conclusion, this study provides a systematic and empirical analysis of the various factors and their complex interactions that impact the entrepreneurial intentions of college students. It confirms that psychological factors like growth mindset and entrepreneurial self-efficacy play a significant role in shaping entrepreneurial intentions, beyond mere information or technical education. This research emphasizes that these psychological factors should be comprehensively considered when developing and implementing policies and programs related to college entrepreneurship education.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.19 no.1
• /
• pp.55-73
• /
• 2024

Unicorn companies are attracting attention around the world as they are recognized for their high corporate value in a short period of time as an innovative business models. Their growth process presents good lessons for the startup ecosystem and have a positive impact on national economic development and job creation. However, previous studies related to unicorn companies are focused on 'event studies' and 'case studies' such as characteristics of founders, environmental factors, business models and success/failure cases of companies already recognized as unicorns rather than a multifaceted approach. The occurrence of unicorn companies and Macroscopic analysis of related factors is lacking. Against this background, this study are considering the characteristics of unicorns examined through previous research and the current status unicorns with a high proportion of technology companies, the purpose was to analyze the impact of the country's technological competitiveness, such as 'technology human resource index', 'R&D index', and 'technology infrastructure index', on the increase in unicorn companies. For statistical analysis, data published by various international organizations, the Bank of Korea, and Statistics Korea from 2017 to 2020 and unicorn company data compiled by CB Insights were used as panel data for 44 countries to be tested by multiple regression analysis. As a result of the study, it was confirmed that the number of science majors had a positive (+) effect on the increase of unicorn companies in the case of technology human resource index, and in the case of R&D index, the total amount of R&D investment had a positive (+) effect on the increase of unicorn companies, while the number of Triad Patents Families and the number of scientific and technological papers published had a negative (-) effect on the increase of unicorn companies. Finally, in the case of technology infrastructure index, it was confirmed that the number of the world's 500th-ranked universities had a positive (+) effect on the increase of unicorn companies. This study is the first to reveal the causal relationship between national technological competitiveness and unicorn company growth based on country-specific and time-series empirical data, which were insufficiently covered in previous studies. and compared to the UN's ranking of the global industrial competitiveness index and the OECD's total R&D investment by country, Korea is considered to have technological and growth potential, while the number of unicorn companies driving growth as leaders of the innovative economy is relatively small, so the research results can be used when establishing policies to discover and foster unicorn companies in the future.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.19 no.4
• /
• pp.69-85
• /
• 2024

Social enterprises, hybrid organizations that blend the logic of the public and market economies, have emerged as an alternative to market failure. However, due to the government-led compressed growth of social enterprises, many social enterprises rely on government financial support, and when the support ends, the survival rate drops significantly and the scale remains at the microenterprise level, raising concerns about the quality growth and sustainability of social enterprises. Therefore, the purpose of this study is to identify the social entrepreneurial orientation that affects the sustainable management performance and to empirically analyze the moderating effect of network utilization capabilities in this process. To achieve the purpose of this study, a questionnaire was distributed to a random sample of member organizations in the metropolitan area, including the Incheon City Small Business Association, the Gyeonggi-do Small Business Association etc. The survey was conducted for about two months and a total of 1,300 questionnaires were distributed and 180 were returned, of which 173 were used for empirical analysis, excluding seven that were not returned. The collected survey data were subjected to structural equation modeling test using Smart PLS ver. 4.1 statistical package. The results showed that entrepreneurial value orientation and social value orientation positively influenced both economic and social performance. Convergent value orientation was only found to have an effect on economic performance, but not on social performance. Finally, the moderating effect of network capabilities was also found, suggesting that social entrepreneurial orientation positively affects organizational performance when social network capabilities are higher.

• Journal of Fisheries and Marine Sciences Education
• /
• v.4 no.1
• /
• pp.30-46
• /
• 1992

Korea's first exploratory tuna fishing was done with a used longliner in 1957. Then the commercial fishing has been made steady headway since the 1960's and grown up to one of major tuna fishing countries in 1970's. The tuna fishing aimed primarily at acquiring foreign currency, then tuna was exported directly from the overseas fishing base. Tuna, however, has been gradually favored by Koreans as high-proteined foods according to the growth of GNP since the 1970's. In 1980, the canned tuna began to be produced and sold at home. And so the demand of raw tuna for cannaries has steeply increased not only for home but also for abroad, and stimulated the development of tuna purse seine fishery. The author carried out a study on the development of tuna purse seine fishery in Korea and countries concerned-the United States and Japan-because it is recognized to be significant for the further development of this fishery. Just as purse seining was originated in the United States, so tuna purse seining was also pioneered by Californian fishermen in the west coastal waters of the United States (Eastern Pacific Ocean). They started to produce the canned tuna in the early 1900's, and the demand for raw tuna began to be increased rapidly. In those days, tuna was mostly caught by pole-and-line, but the catch amount was far away from the demand. To satisfy this demand, they began to try out fishing tuna by the use of purse seine which had been born in the eastern waters in the 1820's and applied to catch white fishes in the western waters of the United States in those days. Even though their trial was technically successful through severe trial and error, a new problem was raised on the management of tuna resource and the preservation of porpoise which was occassionally caught with tuna. Then the Inter-American Tropical Tuna Commission (IATTC) was established by countries neighboring to the United States in 1950 and they set up the Commission's Yellowfin Regulatory Area (CYRA) and regulated the annual quota for yellowfin. Then, American owners tried to send their seiners to the Western African waters to expand the fishing ground in 1967 and to the Centeral-Western Pacfic in 1974, and the fishing ground was widely expanded. The number of the United States' purse seiners amounted to about 150 in 1980, but the enthusiasm was gradually cooled thereafter and the number of seiner was decreased to 67 in 1986. The landing of tuna by purse seiners in the United States after 1980 maintains 200 thousands M/T or so with a little increase despite the decreasing of domestic seiners. This shows that the landing by foreign seiners are increasing, compared with the landing by domestic seiners are decreasing. In Japan, even though purse seining was introduced in 1880, they had fished tuna by longline and pole-and -line until the tuna purse seining was introduced from the United States again. In the 1960's, Japanese tuna seiners made the exploratory fishing in the South-western Pacific and West African waters with a limited success. In 1971, the government-funded research center "JARMRAC" conducted the exploratory fishing which extended to the Central American waters, the Asia-Pacific Region and the South-western Pacific. It had also much difficulties, till they improved the fishing gear adaptable to the new fishing condition in the South-western Pacific. Japanese government has begun to licence 32 single seiners and 7 group seiners since 1980 and their standard has lasted up to now. The catch in the Pacific Islands Region amounted to 160 thousands M/T in 1986. Korea's tuna purse seine fishery was originated in 1971 by Jedong Industrial Co., Ltd. with three used tuna purse seiners purchased from the United States, and they began to fish in the Eastern Pacific, but failed owing to the superannuation of vessel and the infancy of fishing technique. The second challenge was done by Dongwon Industrial Co., Ltd. in 1979, with one used seiner purchased from the United States, and started to fish in the Eastern Pacific. Even though the first trial was almost unsuccessful but they could obtain the noticeable success by removing the vessel to the South-western Pacific in 1980. This success stimulated the Korean entherprisers to take part in this fishery, and the number of Korean tuna purse seiners has been increased rapidly in accordance with the increased demand for raw tuna. The number of vessels actually at work amounted to 36 in 1990 and they operate in the South-western Pacific. The annual catch of tuna by purse seiners amounted to 170 thousands M/T in 1990 and ranked to one of the major tuna purse seining countries in the world.

• KDI Journal of Economic Policy
• /
• v.13 no.4
• /
• pp.91-116
• /
• 1991

Market liberalization progressing simultaneously with high and rapidly rising domestic wages has created an adverse business environment for domestic firms. Korean firms are losing their international competitiveness in comparison to firms from LDC(Less Developed Countries) in low-tech industries. In high-tech industries, domestic firms without government protection (which is impossible due to the liberalization policy and the current international status of the Korean economy) are in a disadvantaged position relative to firms from advanced countries. This paper examines the division of roles between the private sector and the government in order to achieve a successful structural adjustment, which has become the impending industrial policy issue caused by high domestic wages, on the one hand, and the opening of domestic markets, on the other. The micro foundation of the economy-wide structural adjustment is actually the restructuring of business portfolios at the firm level. The firm-level business restructuring means that firms in low-value-added businesses or with declining market niches establish new major businesses in higher value-added segments or growing market niches. The adjustment of the business structure at the firm level can only be accomplished by accumulating firm-specific managerial assets necessary to establish a new business structure. This can be done through learning-by-doing in the whole system of management, including research and development, manufacturing, and marketing. Therefore, the voluntary cooperation among the people in the company is essential for making the cost of the learning process lower than that at the competing companies. Hence, firms that attempt to restructure their major businesses need to induce corporate-wide participation through innovations in organization and management, encourage innovative corporate culture, and maintain cooperative labor unions. Policy discussions on structural adjustments usually regard firms as a black box behind a few macro variables. But in reality, firm activities are not flows of materials but relationships among human resources. The growth potential of companies are embodied in the human resources of the firm; the balance of interest among stockholders, managers, and workers of the company' brings the accumulation of the company's core competencies. Therefore, policymakers and economists shoud change their old concept of the firm as a technological black box which produces a marketable commodities. Firms should be regarded as coalitions of interest groups such as stockholders, managers, and workers. Consequently the discussion on the structural adjustment both at the macroeconomic level and the firm level should be based on this new paradigm of understanding firms. The government's role in reducing the cost of structural adjustment and supporting should the creation of new industries emphasize the following: First, government must promote the competition in domestic markets by revising laws related to antitrust policy, bankruptcy, and the promotion of small and medium-sized companies. General consensus on the limitations of government intervention and the merit of deregulation should be sought among policymakers and people in the business world. In the age of internationalization, nation-specific competitive advantages cannot be exclusively in favor of domestic firms. The international competitiveness of a domestic firm derives from the firm-specific core competencies which can be accumulated by internal investment and organization of the firm. Second, government must build up a solid infrastructure of production factors including capital, technology, manpower, and information. Structural adjustment often entails bankruptcies and partial waste of resources. However, it is desirable for the government not to try to sustain marginal businesses, but to support the diversification or restructuring of businesses by assisting in factor creation. Institutional support for venture businesses needs to be improved, especially in the financing system since many investment projects in venture businesses are highly risky, even though they are very promising. The proportion of low-value added production processes and declining industries should be reduced by promoting foreign direct investment and factory automation. Moreover, one cannot over-emphasize the importance of future-oriented labor policies to be based on the new paradigm of understanding firm activities. The old laws and instititutions related to labor unions need to be reformed. Third, government must improve the regimes related to money, banking, and the tax system to change business practices dependent on government protection or undesirable in view of the evolution of the Korean economy as a whole. To prevent rational business decisions from contradicting to the interest of the economy as a whole, government should influence the business environment, not the business itself.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.6
• /
• pp.1143-1153
• /
• 1998

Background : Recent outbreaks of pulmonary disease due to drug-resistant strains of Mycobacterium Tuberculosis have resulted in significant morbidity and mortality in patients worldwide. We reviewed our experience to evaluate the effects of pulmonary resection on the management of multidrug-resistant tuberculosis. Method : A retrospective review was performed of 41 patients undergoing pulmonary resection for multidrug-resistant tuberculosis between January 1993 and December 1997. We divided these into 3 groups according to the radiologic findings : (1) patients who have reasonably localized lesion (Localized Lesion Group ; LLG) (2) patients who have cavitary lesions after pulmonary resection on chest roentgenogram (Remained Cavity Group : RCG) (3) patients who have Remained infiltrative lesions postoperatively (Remained infiltrative group : RIG). We evaluated the negative conversion rate after resection and overall response rate of the groups. Then they were compared with the results of the chemotherapy on the multi drug-resistant tuberculosis which has been outcome by Goble et al. Goble et al reported that negative conversion rate was 65% and overall response rate, 56% over a mean period of 5.1 months. Results : Seventy five point six percent were men and 24.4% women with a median age of 31 years (range, 16 to 60 years). Although the patients were treated preoperatively with multidrug regimens in an effort to reduce the mycobacterial burden, 22 of 41 were still sputum culture positive at the time of surgery. 20 of 22 patients(90.9%, p<0.01) responded which is defined as negative sputum cultures within 2 months postoperative. Of 26 patients with the sufficient follow up data, 19 have Remained sputum culture negative for a mean duration of 25.7 months (73.1%, p<0.05). The bulk of the disease was manifest in one lung, but lesser amounts of contralateral disease were demonstrated in 15, consisted of 8 in RIG and 7 in RCG, of 41. 12 of 12 patients (100%, p<0.01) who were sputum positive at the time of surgery in LLG converted successfully. 14 of 15 patients (93.3%, p<0.05) with the follow up have completed treatment and not relapsed for a mean period of 25. 7 months. The mean length of postoperative drug therapy of LLG was 12.2 months. In RIG, postoperative negative conversion rate was 83.3% which was not significant statistically. There was a statistical significance in overall response rate (100%, p<0.05) of RIG for a mean period of 24.4 months with a mean length of postoperative chemotherapy, 11.8 months. In RCG a statistically lower overall response rate (14.3%, p<0.01) has been revealed for a mean duration of follow up, 24.2 months. A negative conversion rate of RCG was 75% which was not significant statistically. Conclusion : Surgery plays an important role in the management of patients with multidrug-resistant Mycobacterium tuberculosis infection. Aggressive pulmonary resection should be performed for resistant Mycobacterium tuberculosis infection to avoid treatment failure or relapse. Especially all cavitary lesions on preoperative chest roentgenogram should be resected completely. If all of them could not be resected perfectly, you should not open the thorax.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.2
• /
• pp.380-387
• /
• 1998

Background: Minimal pressure support(PSmin) is a level of pressure support which offset the imposed work of breathing(WOBimp) developed by endotracheal tube and ventilator circuits in pressure support ventilation While the lower applied level of pressure support compared to PSmin could induce respiratory muscle fatigue, the higher level than PSmin could keep respiratory muscle rest resulting in prolongation of weaning period during weaning from mechanical ventilation PSmin has been usually applied in the level of 5~10 cm$H_2O$, but the accurate level of PSmin is difficult to be determinated in individual cases. PSmin is known to be calculated by using the equation of "PSmin = peak inspiratory flow rate during spontaneus ventilation$\times$total ventilatory system resistance", but correlation of calculated PSmin and measured PSmin has not been known. The objects of this study were firstly to assess whether customarily applied pressure support level of 5~10 cm$H_2O$ would be appropriate to offset the imposed work of breathing among the patients under weaning process, and secondly to estimate the correlation between the measured PSmin and calculated PSmin. Method : 1) Measurement of PSmin : Intratracheal pressure changes were measured through Hi-Lo jet tracheal tube (8mm in diameter, Mallinckroft, USA) by using pulmonary monitor(CP-100 pulmonary monitor, Bicore, USA), and then pressure support level of mechanical ventilator were increased until WOBimp was reached to 0.01 J/L or less. Measured PSmin was defined as the lowest pressure to make WOBimp 0.01 J/L or less. 2) Calculation of PSmin : Peak airway pressure(Ppeak), plateau airway pressure(Pplat) and mean inspiratory flow rate of the subjects were measured on volume control mode of mechanical ventilation after sedation. Spontaneous peak inspiratory flow rates were measured on CPAP mode(O cm$H_2O$). Thereafter PSmin was calculated by using the equation "PSmin = peak inspiratory flow rate$\times$R, R = (Ppeak-Pplat)/mean inspiratory flow rate during volume control mode on mechanical ventilation". Results: Sixteen patients who were considered as the candidate for weaning from mechanical ventilation were included in the study. Mean age was 64(${\pm}14$) years, and the mean of total ventilation times was 9(${\pm}4$) days. All patients except one were males. The measured PSmin of the subjects ranged 4.0~12.5cm$H_2O$ in 14 patients. The mean level of PSmin was 7.6(${\pm}2.5\;cmH_2O$) in measured PSmin, 8.6 (${\pm}3.25\;cmH_2O$) in calculated PSmin Correlation between the measured PSmin and the calculated PSmin is significantly high(n=9, r=0.88, p=0.002). The calculated PSmin show a tendancy to be higher than the corresponding measured PSmin in 8 out of 9 subjects(p=0.09). The ratio of measured PSmin/calculated PSmin was 0.81(${\pm}0.05$). Conclusion: Minimal pressure support levels were different in individual cases in the range from 4 to 12.5 cm$H_2O$. Because the equation-driven calculated PSmin showed a good correlation with measured PSmin, the application of equation-driven PSmin would be then appropriate compared with conventional application of 5~10 cm$H_2O$ in patients under difficult weaning process with pressure support ventilation.