• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.693-697
• /
• 2007

지하수 함양량을 산정하기 위해서 유역물수지 모형 또는 지하수위 변동곡선법등이 활용되어 왔으며, 각각의 장단점에 대한 많은 논의가 있었다. 지역내의 지하수 관리계획을 위해서는 유역물수지 모형이 적합한 반면, 실제(actual) 함양량의 정확성 문제가 있으며, 지하수위 변동곡선법은 실제 지하수의 증감을 통해 실제 함양변화를 잘 표현하는 반면, 그 영향권이 관측공에 의해 제한된다는 단점이 있다. 이와 같은 두 방법의 장점을 살리고 단점을 보완하기 위해 본 연구에서는 유역유출모의와 지하수위 변동을 동시에 고려하여 지하수 함양량을 추정하는 방안을 제시하였다. 수문학적 과정으로 함양을 분석하기 위해 준분포형 수문모형인 SWAT과 완전분포형 지하수 유동해석 모형인 MODFLOW의 결합모형을 이용한 유역단위 유출해석을 수행한다. 실제로 하천변에 위치한 관측공에서의 지하수위는 하천유출시계열과 유사한 양상을 보이며, 상류 경사지에 위치한 관측공의 지하수위는 토양수의 지체와 감수현상을 나타내므로 이같이 시간적으로 상이한 지체 양상을 반영하기 위해 모형내의 비포화대를 통과하는 함양의 거동을 기존의 단일 저수지 모형에서 다단 저수지 모형으로 개선하고 지체함수와 관련된 매개변수를 보정함으로써 모의 함양 시계열과 관측 지하수위 시계열간의 상관성 분석을 수행할 수 있다. 아울러 모의 및 관측 지하수위 분포의 비교를 통해 공간적인 지하수 분포에 대한 검증을 수행함으로써 함양량 산정 절차가 완성된다. 이같은 일련의 절차는 기존의 유역물수지 모형과 지하수위 변동법을 동시에 고려한 새로운 방식의 지하수 함양량 산정기법으로 제시할 수 있을 것이다.성빈맥(1예), 저심박출증(3예), 재수술이 필요했던 출혈(2예), 흉골 지연봉합(2예), 급성 신부전(2예), 폐렴(1예), 대동맥내 풍선펌프로 인한 혈전색전증(1예),수술 후 섬망(2예) 등이 있었다. 생존한 10명의 환자들 중 1명을 제외한 나머지 9명의 환자에서 $38{\pm}40$개월간의 추적관찰이 되었는데, 추적 관찰 기간 중에 3명이 사망하였고 생존한 6명의 환자는 모두 양호한 상태(NYHA 기능등급, $I{\sim}II$)를 보였으며, 그 중 3명에서는 혈역학적으로 큰 의미가 없는 잔여단락이 있었다. 결론: 급성 심근경색증 후 심실중격 결손은 수술위험도가 높은 질환이지만, 수술 전 대동맥내 풍선펌프를 삽입하고 조기에 심실중격 결손부의 infarct exclusion 술식과 함께 관상동맥우회술을 시행함으로써 만족할 만한 수술 및 중기 결과를 얻을 수 있었다.출물 투여로 저하되었으나 NC군보다는 높게 나타났다. 간 중 중성지질 함량은 참나물 에탄올 추출물 투여 용량에 따른 유의차가 없었으나, 총콜레스테롤 함량은 고용량 병합투여한 HC-PBH군만 유의하게 저하되었다. 혈청 및 간 중의 지질 함량 변화는 정상식이를 급여한 NC군과 NC-PB군 간에는 유의차가 없었다. 따라서 고콜레스테롤식이를 급여하면서 참나물 에탄올 추출물을 병합투여 시에만 지질대사 개선 효과가 있는 것으로 여겨지며, 고용량 병합투여 시 효능이 더 큰 것으로 나타났다. 고콜레스테롤식이로 인한 산화적 스트레스가 고콜레스테롤혈증을 유발하였으며, 이는 참나물 에탄올 추출물에 함유된 항산화물질을 포함한 여러 생리활성물질

• Journal of Soil and Groundwater Environment
• /
• v.11 no.2
• /
• pp.45-55
• /
• 2006

A 2-D unconfined flow model is developed to analyze annual variations of groundwater level and bank filtration rate (BFR) for an experimental riverbank filtration site in Koryeong, Korea. Two types of boundary conditions are examined for the river boundary in the conceptual model: the static head condition that uses the average water level of the river and the dynamic cyclic condition that incorporates annual fluctuation of water level. Simulations show that the estimated BFR ranges $74.3{\sim}87.0%$ annually with the mean of 82.4% for the static head boundary condition and $52.7{\sim}98.1%$ with the mean of 78.5% for the dynamic cyclic condition. The results illustrate that the dynamic cyclic condition should be used for accurate evaluation of BFR. Simulations also show that increase of the distance between the river and the pumping wells slightly decreases BFR up to 4%, and thereby indicate that it is not a critical factor to be accounted for in designing BFR of the bank filtration system. A sensitivity analysis is performed to examine the effects of model parameters such as hydraulic conductivity and specific yield of the aquifer, recharge rate, and pumping rate. The results demonstrate that the average groundwater level and BFR are most sensitive to both the pumping rate and the recharge rate, while the water level of the pumping wells is sensitive to the hydraulic conductivity and the pumping rate.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.3
• /
• pp.53-65
• /
• 2007

Appropriate representation of hydrologic boundaries in groundwater models is critical to the development of a reliable model. This paper examines how the model predictions are affected by the uncertainty in the conceptualization of the hydrologic boundaries including groundwater divides, streams, and the lower boundaries of the flow system. The problem is analyzed for a study area where a number of field data for model inputs were available. First, a groundwater flow model is constructed and calibrated for the area using the Visual Modflow code. Recharge rate is used for the unknown variable determined through the calibration process. Secondly, a series of sensitivity analyses are conducted to evaluate the effects of model uncertainties embedded in specifying boundary conditions for streams and groundwater divides and specifying lower boundary of the bedrock. Finally, this paper provides some guidelines and discussions on how to deal with such hydrologic boundaries in view of developing a reliable conceptual model for the groundwater flow system of Korea.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.1
• /
• pp.24-31
• /
• 2008

Sulfate reducing bacteria (SRB) is universally distributed in the sediment, especially in marine environment. SRB reduce sulfate as electron acceptor to hydrogen sulfide in anaerobic condition. Hydrogen sulfide is reducing agent enhancing the reduction of the organic and inorganic compounds. With SRB, therefore, the degradability of organic contaminants is expected to be enhanced. Ferrous iron reduced from the ferric iron which is mainly present in sediment also renders chlorinated organic compounds to be reduced state. The objectives of this study are: 1) to investigate the reduction of TCE by hydrogen sulfide generated by tht growth of SRB, 2) to estimate the reduction of TCE by ferrous iron generated due to oxidation of hydrogen sulfide, and 3) to illuminate the interaction between SRB and ferrous iron. Mixed bacteria was cultivated from the sludge of the sewage treatment plant. Increasing hydrogen sulfide and decreasing sulfate confirmed the existence of SRB in mixed culture. Although hydrogen sulfide lonely could reduce TCE, the concentration of hydrogen sulfide produced by SRB was not sufficient to reduce TCE directly. With hematite as ferric iron, hydrogen sulfide produced by SRB was consumed to reduce ferric ion to ferrous ion and ferrous iron produced by hydrogen sulfide oxidation decreased the concentration of TCE. Tests with seawater confirmed that the activity of SRB was dependent on the carbon source concentration.

• The Korean Journal of Pesticide Science
• /
• v.17 no.3
• /
• pp.178-184
• /
• 2013

Residual toxicity test to honeybee was conducted to evaluate an indirect effects on honeybee after planting hole application of systemic insecticides which were highly toxic to honeybee (Apis mellifera). In this study, It was applied three application rates in the planting hole by three systemic insecticides, dinotefuran GR, imidacloprid GR and clothianidin GR at planting time of tomato. Residual analysis of foliage was carried out after periodic sampling the foliage and investigated the effects of exposed honeybee on the tomato foliage. The honeybee mortality by dinotefuran residues on the foliage was shown almost 100% at 7 days after treatment and decreased 17 days after treatment. The maximum mortality of honeybee by imidacloprid residues on the foliage was 44 ~ 72%. But the effect of pesticide lasted for 18 days and then decreased. The honeybee mortality by clothianidin residues on the foliage was 100% at 7 days after treatment and decreased 14 days after treatment. A tendency of the honeybee mortality and residue in foliage showed a similar character as time goes by. The residues in tomato foliage decreased gradually after 14 days by vigorous growth of tomatoes and the toxic effect of honeybee was significantly decreased after 21 days in actual usage of the treatment.

• Korean Journal of Soil Science and Fertilizer
• /
• v.1 no.1
• /
• pp.27-41
• /
• 1968

In order to clarify the effect of various forms or phosphate on the production of paddy in Korea and to find out the superiority of any form, a number of field and pot experiments involving various phosphate fertilizers were carried out in addition to conducting one each of sand culture and soil culture pot experiments in 1963 and 1964. The results of these studies are summarized as follows: 1. In sand culture experiment, the best effect of a phosphate fertilizer was obtained with the mono-calcium phosphate which is soluble in water, followed by citric acid soluble phosphate such as fused phosphate and di-calicum phosphate. However, in the pot culture and field experiments, fused phosphate had shown it's superiority than triple superphosphate which contains water soluble form of phosphate followed by hypo phosphate, roasted phosphate, compound fertilizer, and slag phosphate. The effect of rock phosphate was the least in most cases. 2. The superiority of fused phosphate to triple super phosphate in soil culture was supposed to be: a) The fused phosphate can neutralize the soil acidity. b) The fused phosphate can supply magnesium and magnesium lead to the balanced conditions of exchangeable bases in soils. c) The magnesium in the fused phosphate helps the transportation of phosphate, and regulate the absorption of the element.

• Horticultural Science & Technology
• /
• v.18 no.5
• /
• pp.599-604
• /
• 2000

This experimemt was conducted to determine the effect of ridge-up bed with different height (0, 20, 40, 60 cm) on the fruit quality of 'Miyagawa Wase' satsuma mandarin cultivated in a plastic film house. Soil moisture was measured at the soil depths of 10, 30, and 60 cm for each height of ridge-up bed. The time required to reach the condition, -1.4 Mpa at 30 cm deep in soils, which are supposed to be the ideal soil moisture potential and soil depth for high quality satsuma mandarin production, was 100, 60, and 30 days for 20, 40, and 60 cm ridge-up bed, respectively, and more than 100 days for 0 cm. Peel chromaticity by 'a' value was increased as the ridge-up height went up, so that plants grown at the bed with 60 cm height had 11 degree higher value than those of plants grown at the bed with 0 cm height. The 'a/b' values also had a similiar trend as value 'a'. The reducing sugar level of the fruit juice, which was composed of glucose and fructose, was increased as the height of ridge went up, showing significant difference between the ridge heights. The sucrose level had the same trend as the reducing sugar level although the difference between the ridge heights were not significant. Generally, the soluble solid level is considered to be representing the fruit quality. It had 11.4, 12.1, 12.5, $12.8^{\circ}Brix$ for 0, 20, 40, and 60 cm ridge-ups, respectively, showing $1.4^{\circ}Brix$ difference between 0 and 60 cm ridges. Acidity basically showed the same result as that of the soluble solid level depending on the height of the ridges.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.4
• /
• pp.79-86
• /
• 2015

Korean territories has formed about 70% of mountainous areas that have acidified serious level to average pH 4-5. There are a number of abandoned metal mines about 1,000 in Korea. However, mine tailings and waste rock included heavy metals are exposed to long-term environment without prevention facility or treatment system. Thus, ongoing management and monitoring of soil environment are required. Most of abandoned mine scattered in forest areas of slopes. Soil erosion due to continuous rainfall in the slopy areas can cause the secondary pollution by the influence eutrophication of water system and the productivity loss of the plant. Therefore, this study would like to estimate pH leaching rate by artificial rainfall using waste neutralization-agent in lysimeter. Moreover, the potentially of secondary pollution related to precipitation is figured out through the experiments, and the optimal planting methods would examinate after neutralizing treatment in soil. Experiments composed three kinds of lysimeter; lysimeter 1 had filled only acidic soil, lysimeter 2 had neutralized soil, and lysimeter 3 had planting plants after neutralized soil. In the results, lysimeter 2 showed the lowest pH leaching, and there is not specific relativity with pH leaching of the seasonal characteristics.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.6
• /
• pp.93-102
• /
• 2008

Experimental studies were conducted to characterize the synthesized nanoscale zero-valent iron (NZVI) which is resistant to oxidation in the atmospheric environment. XRD, XPS, and TEM analyses revealed that the oxidation-resistant NZVI particles formed under various controlled air contact conditions (4, 8 and 12 mL/min) have shells with ${\sim}$5 nm thickness. The shells consist of magnetite (${Fe_3}{O_4}$) and maghemite (${\gamma}-{Fe_2}{O_3}$), predominantly. No substantial differences were found in the shell components and thickness among NZVI particles formed under the various air flow rates. On the other hand, shell was not detected in the TEM image of rapidly oxidized NZVI particles. NZVI particles synthesized under the various air flow rates showed similar TCE degradation performances ($k_{obs}$= 0.111, 0.102, and 0.086 $hr^{-1}$), which are equivalent to approximately 80% of those obtained by the fresh NZVI particles. TCE degradation efficiencies of the NZVI particles(fresh, controlled air contact and rapidly oxidized) were improved after equilibrating with water for one day, indicating that depassivation of the shells occurred. The performances of NZVI particles decreased to 90% and 50% of those of the fresh NZVI particles, when they were equilibrated with the atmosphere for a week and two months, respectively. The NZVI particles synthesized under the controlled air contact would have advantages over traditional NZVI particles in terms of practical application into the site, because of their inertness toward atmospheric oxygen.

• Journal of Conservation Science
• /
• v.26 no.3
• /
• pp.335-340
• /
• 2010

Urethane resin applicable for the first transcription of historical site and transcription of soil layer were synthesized in order to replace the imported urethane resin, NS-10. Comparing to the NS-10, the urethane polymers showed similar penetration to wet soil and formed a stable layer of polyurethane during progress working the peeling off the polyurethane pre-product from epoxy surface of final product. The urethane resins used for the first transcription of historical site improved tensile strength, which is consistent with that of NS-10. In addition the urethane resin for transcription of soil layer was supplied with hardness that have a also same strong point as like NS-10. This property is advantage due to simplifying the transcription work of soil layer in backward. When we tested to the real ground soil as well as experimentation compressed soil with use these synthesis urethane resin, we ca get the satisfying result in penetration property and stability and these properties evaluated the resins as an advanced product serving better convenience for worker.