• Fashion & Textile Research Journal
• /
• v.17 no.6
• /
• pp.881-894
• /
• 2015

The silver generation have clothing style of optimal daily life comparing than young generation because they do not participate a specific sport event but daily- life exercise. As the human body ages, the figure of the silver generation shows different body shape because upper body changes to curved figure including the belly and waist part. Therefore, clothing characteristics for the silver generation should be considered with proper function, design and textiles to optimize body movement. This study investigated various exercise types according to motion analysis of the silver generation in order to develop the design of the active T-shirts reflecting the structural properties and providing the optimum exercise circumstance. The results to consider design needs are as followed; As the T-shirts design for the flexible exercise which required frequent movement of upper body such as bending and waist twisting during body stretching, a stretch fabric applied to the waist part considering T-shirts allowance and length to make extreme elongation and support for well-fitting appearance of the T-shirts. As the T-shirts design for the instantaneous reactionary exercise, high elastic four-way stretch fabric is applied to the part of arm hole to optimize skeletal and muscle movement for entire body and arm work. As the T-shirts design for the endurance exercise such as climbing, cycling, and walking, the shoulder line of the back part has cutting line allowance to make optimum movement of the upper body but no change of the waist part.

• Fashion & Textile Research Journal
• /
• v.17 no.3
• /
• pp.341-350
• /
• 2015

The purpose of this study was to suggest a silver blouse design by applying modularization. The precedent study of the researcher was used to analyze the design characteristics that were displayed in domestic and foreign silver blouses. This study was taken as the follow-up research as the module components and range of the silver blouse were set up and it was based on to suggest a silver blouse design with application of modularization. The intention was to base on the module system used in various fields to apply the modularization method on the module design research of silver blouse and as a result, it was derived into 6 types. The traditional design reflected on the characteristic of how the silver generation prioritizes practicality and in order to emphasize this, it will be more effective to apply the fastener and folding method for the development of the design. The contemporary design reflected on the characteristic of how the silver generation prioritizes aesthetics and in order to emphasize this, it will be more effective to apply the module composition method where integration can be made according to the desire of the wearer for the development of the design. The trendy design reflected on how the characteristic of the silver generation wants to look younger and the derived modularization method can be applied freely for expression. Since the range, structure, and formation where modularization can be applied are general, it is implied that there is a need to take sustainable development has to be conducted as the tool that can create different types of design.

• The Research Journal of the Costume Culture
• /
• v.26 no.5
• /
• pp.665-678
• /
• 2018

The purpose of this study is to promote the elderly apparel industry for the increasing numbers of elderly obese male population. In the study, a total number of 249 males between the ages of 60 to 85 were studied to analyze their body types and differences. The group had a Rohrer Index of 1.6 or higher and BMI of 25 or higher. The noticeable physical differences in the group were shorter waist front length, bigger waist and hip circumferences with increasing age and slimmer limbs that are associated with the natural aging process with or without obesity. The obese body types have been classified in the following 3 different categories. Type 1 is the group that has lower body obesity with broad shoulders and relatively slimmer abdomen than a heavy bottom. A total number of 84 people belonged to the type 1 obesity category which makes up 33.8% of the total. Type 2 is the group that has upper body obesity with especially large abdominal obesity. A total number of 76 people, 30.5% of the total, were classified as type 2. Type 3 is the group that has whole body obesity with balanced obesity in the whole body. A total number of 89 people, 35.7% of the total, made up type 3.

• The Research Journal of the Costume Culture
• /
• v.25 no.4
• /
• pp.476-487
• /
• 2017

The purpose of this study was to suggest torso patterns that fit the three main body shapes of elderly obese women. To reduce time, costs, and also the trial and error needed to make patterns, the CLO program for 3D test wear was employed. Three virtual models for aged obese women were use, with the YUKA system used to produce torso patterns. 3D simulation of test wear and corrections was done to design optimal torso patterns. The results were as follows: First, for the three models of obese women's body shapes as realized by CLO 3D, Type 1 is lower-body obesity shapes, Type 2 is abdominal obesity shapes, and Type 3 is whole-body obesity shapes. Second, to design the study patterns, actual measurement values, back waist length and waist to hip length, were used. The armhole depth (B/4-1.5), front interscye (B/6+2.3), front neck width (B/12-0.5), front neck depth (B/12+0.5), front waist measurement (W/4+ 1.5+D), front hip measurement (H/4+2+0.5), and back hip measurement (H/4+3-0.5) were calculated using formulas. Third, according to the results of test-wearing the study patterns, reduced front neck width and depth improved the neck fit and reduced armhole depth bettered loose or plunging armhole girth and also reduced the sagging of bust c.. Also, tight sidesfrom aprotruded waist and abdomen improved with the increase of surpluses in the back waist and also back and front hip c. The exterior was enhanced by displacement of back and front darts, which distributed surpluses better.

• The Research Journal of the Costume Culture
• /
• v.28 no.3
• /
• pp.299-312
• /
• 2020

The purpose of this study is to create a shirt sloper suitable for an elderly male body shape by producing virtual models using a 3D-virtualization program, making a torso prototype using the Yuka CAD system, and employing 3D simulation to virtualize and calibrate the model. First, the following three types of obese dummies are implemented through the CLO 3D program: Type 1 exhibits body fat in the lower body; Type 2 exhibits an obese abdomen; and Type 3 displays a balanced form of obesity. Second, for the design of the shirt pattern, the waist back length (measured value+1), back armhole depth (C/10+12+3+0.5~1.5), front armhole depth (back armhole depth 0~1), front interscye (2C/10-1+0.5-0.5), armscye depth (C/10+2+3.5+ 0.5), back interscye (2C/10-1+1), front chest C (C/4+2.5+1), back chest C (C/4+2.5-1), front hem C (C/4+2.5+1(+2)), back hem C (C/4+2.5-1(+2)), cap height (AH/3-5), and biceps width (Front AH-1, Back AH-1) are calculated. Third, the virtual attachment of the shirt pattern is resolved by increasing the front and back armhole depths, and the front and rear wrinkles are improved by adding a back armhole dart. The front hem lift and lateral pull caused by the protrusion of the abdomen are amended by increasing the margin of the chest, waist C, and hip C, with the appearance improved by balanced margin distribution in the front, back, and side panels. The improved retail pattern with an increase in the front armholes C was balanced on the torso plate.

• The Research Journal of the Costume Culture
• /
• v.27 no.6
• /
• pp.632-644
• /
• 2019

This study presents an efficient clothes-sizing system for those experiencing obesity in old age with the aim of revitalizing the clothing industry for older obese people. The study targets 249 obese men aged 60 to 85 who satisfy a Rohrer index score of 1.6 or higher and a BMI (body mass index) of 25 or higher. Elderly obese males showed more obesity in the body based on the waist. In particular, those in their 60s were the most obese, and after reaching their 70s, characteristics of old age in which the stature was reduced and the limbs were tapered were shown. The clothes-sizing system was set to 5cm in stature, 5cm and 3cm in chest girth, 2cm in waist girth (omphalion), and 2cm in hip girth according to the KS standards. Through the two-way distribution of each section, the name of the section with a high distribution was given. Casual tops were selected from eight sizes, ranging from 155 to 170cm in stature and 95 to 105cm in chest girth. Suit top sizes were selected from eight sizes, ranging from 160 to 170cm in stature and 94 to 103cm in chest girth. Bottoms suggested 10 sizes distributed between 90 and 100cm in waist girth (omphalion) and 92 and 98cm in hip girth. According to the KS standards, the detailed size was divided into the basic part and the reference part.

• Information and Communications Magazine
• /
• v.33 no.8
• /
• pp.19-27
• /
• 2016

최근 들어 로봇 기술은 팔과 다리가 달린 인간형 로봇 휴머노이드(Humanoid)와 같이 겉모습뿐만 아니라 히노애락(喜怒哀樂)과 같은 인간의 감정을 흉내 내는 지능형 감성로봇(Emotional robot)으로 진화하고 있으며, 사물인터넷(Internet of things, IoT), 빅데이터(Big data) 및 인공지능(Artificial intelligence, AI) 기술까지 융합하는 연구가 진행되고 있다. 이러한 기술 발전을 기반으로 로봇산업은 전통적인 제조업뿐만 아니라 의료, 실버, 국방, 건설, 생활가전, 물류, 드론 등 다양한 분야에서 활용이 가능하며, 또한 교육, 문화, 예술에도 접목을 할 수 있어 넓은 분야에서 발전 가능성이 매우 큰 산업이다. 본 논문에서는 인간과 교감하는 감성로봇의 개념과 주요 기술을 소개한다. 아울러, 최근까지 연구 개발되었거나 제품으로 출시되었던 감성로봇 사례를 소개하고 향후 전망에 대해서 논의한다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.64.2-64.2
• /
• 2012

전자산업에서 소자를 제작하는 핵심공정으로써, 패턴을 형성하는 방식은 식각 마스크를 통해 이루어진다. 공정 순서는 원하는 물질을 증착한 후 사진공정 (photolithograpy)을 통하여 원하는 패턴의 감광제 식각마스크 (etch mask)를 형성하게 된다. 이후, 습식식각이나 건식식각을 통하여 물질의 불필요한 부분을 제거한 후 최종적으로 감광제 식각마스크를 제거하여 원하는 물질의 패턴을 얻게 된다. 최근에 소개된 잉크젯 프린팅 기술 (inkjet printing technology)은 나노 잉크를 이용하여 사진공정과 식각공정을 이용하지 않고, 직접 나노잉크를 분사하여 패턴을 형성하는 방법으로, 패터닝 공정을 단순화 시킬 수 있을 뿐만 아니라 각종 전자 산업의 환경오염물을 획기적으로 줄일 수 있는 친환경기술이다. 특히, OLED, O-TFT, RF-ID, PCB 분야 등 다양한 전자산업분야의 제조기술로서 응용하고자, 전도성 폴리머나 실버 (silver) 나노파티클 잉크를 이용한 전도성 라인 패터닝 (line patterning)에 관한 연구가 활발히 진행되고 있다. 본 강연에서는 친환경 생산공정기술 측면에서의 잉크젯기술을 분석하고, 기술의 구성요소, 응용분야, 기술 동향에 관해서 소개하고, 또한 현재 한국생산기술연구원에 진행하고 있는 잉크젯 프린팅 기술 기반의 인쇄전자 분야에 관한 내용을 소개한다.

• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.3
• /
• pp.42-49
• /
• 2024

In the electromagnetic wave shielding material market, superior shielding performance in the high-frequency range, along with flexibility and durability, has emerged as critical requirements. The need for high-performance EMI (Electromagnetic Interference) films to address electromagnetic wave interference issues is growing, particularly in various industrial sectors such as smart electronic devices, automotive electronic systems, and communication equipment. In this study, a trimodal silver paste was developed and fabricated into an EMI film, with its performance evaluated. The developed silver paste, utilizing a modified epoxy binder, exhibited properties suitable for screen printing processes. The film demonstrated excellent shielding performance, with an average attenuation of -99 dB in the high-frequency range of the 5G spectrum (26.5 GHz to 40 GHz), and a shielding effectiveness of -90.3 dB at 33.6 GHz. Flexibility and durability tests showed that the film maintained its flexibility even at a curvature radius of 1 mm. In the bending cycle test, the resistance increased by approximately 25.5% from 0.51 Ω to 0.64 Ω after 10,000 cycles in the outer bending scenario, while in the inner bending scenario, the resistance decreased by about 3.6%, indicating reduced resistance to compressive stress.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.9_10
• /
• pp.1408-1417
• /
• 2007

In Korea, to deal with the housing needs of the elderly, the government operates free nursing homes and residential homes. And to deal with the needs for daily necessities, imported products or products for the disabled have been supplied for the elderly. The government has recognized the importance of silver industry in this rapidly aging society and has established strategies to vitalize industries related to seniors to deal with the seniors' need for food, clothing, and shelter. This study examined the necessity of nursing home gowns, and the development of nursing home gowns that are environmentally friendly, beautiful and functional for the new silver generation. For this study, literature review and Internet search were conducted regarding the status of silver fashion, necessity of nursing home gowns, emergence of new silver generation and change in lifestyle, and value and utilization of natural dye and traditional patterns. To produce nursing home gowns, fabric was dyed using fermented indigo dying, and 3 styles of nursing home gowns for each gender were designed in consideration of seasons. Lastly, these gowns were evaluated by fashion experts, medical personnel, hospital gown and silver wear experts, and natural dye experts. The results showed that the traditional Korean designs developed in this study were excellent and the fermented indigo dye was appropriate for the nursing home gowns. The development of nursing home gowns in this study will be utilized as basic material for the development of silver wear and nursing home gowns to improve the quality of life for the seniors.