• Journal of Practical Engineering Education
• /
• v.14 no.1
• /
• pp.127-136
• /
• 2022

As manufacturing items have changed in various ways, changes in the mass production of small-scale small-scale production of multiple varieties have become commonplace. As a result, the method of the manufacturing site has also changed, and the "smart factory," which emphasizes the production efficiency aspect using automation lines and big data of factories, is in the spotlight according to the global market economy. The introduction performance of smart factories has a positive effect in terms of production efficiency and is drawing a steep upward curve. In addition to the positive aspects, the aspect that needs to be supplemented in the future is the support and cooperation of specialized smart equipment suppliers, but education on standardized smart factories and the relocation of existing manpower, education, evaluation, and creative production that robots cannot replace Various support measures are also needed for activities. In addition, continuous management and systematic education are required to enter the upper stage. Through the case of companies that have built smart factories, it is intended to emphasize the need for proper use of manpower and support management for settlement and maintenance after introduction and continuous on-the-job training through the comparison of productivity before and after introduction to ensure the effect continues.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.5
• /
• pp.52-62
• /
• 2023

The objective of this study is to propose an automated algorithm for precise cutting length of slab rebar complying with regulations such as anchorage length, standard hooks, and lapping length. This algorithm aims to improve the traditional manual quantity take-off process typically outsourced by external contractors. By providing accurate rebar quantity data at BBS(Bar Bending Schedule) level from the bidding phase, uncertainty in quantity take-off can be eliminated and reliance on out-sourcing reduced. In addition, the algorithm allows for early determination of precise quantities, enabling construction firms to preapre competitive and optimized bids, leading to increased profit margins during contract negotiations. The proposed algorithm not only streamlines redundant tasks across various processes, including estimating, budgeting, and BBS generation but also offers flexibility in handling post-contract structural drawing changes. In particular, the proposed algorithm, when combined with BIM, can solve the technical problems of using BIM in the early phases of construction, and the algorithm's formulas and shape codes that built as REVIT-based family files, can help saving time and manpower.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.2
• /
• pp.193-200
• /
• 2010

Due to the characteristic of culvert structure, the standard section of the culvert has been established and applied in field. However, this becomes a limitation in selecting a section design corresponding to various field conditions although it can improve the design and applicability of culvert structure. In order to overcome this limitation, we have developed the design and application technology of culvert structure corresponding to the field conditions that various shapes of culvert structure can be covered by assembly of precast segments. Because the structural characteristics of assembling-type waterway culvert structure, the thickness of structure and amount of reinforcing rods can vary according to the fixation or internal hinge status in the connection part of precast segments. This has a strong influence on the applicability and economic efficiency of culvert structure. Accordingly, in order to suggest a reasonable modeling technique of segment connection parts, this study has conducted the field experiment and numerical analysis. According to the results of field experiment and numerical analysis, the slab, wall and base slab with mortar splice sleeves have shown that the assembling-type of waterway culvert structure behaves like an integrated structure.

• 한국노년학
• /
• v.31 no.2
• /
• pp.211-222
• /
• 2011

The purpose of this study was to assess pain, life satisfaction, sleep pattern, and depression and the relations between these in elderly women with ostearthritis. Methods: The subjects were 124 elderly women with osteoarthritis at senior center in C city. Data were analyzed by descriptive statistics, Pearson's correlation coefficients, and multiple regression with SPSS/WIN 14.0. Results: The major findings of this study were as follows. 1) The mean score of variables were pain 2.58, life satisfaction 65.4, sleep pattern 37.6 and depression 13.58. 2) 43.5% of the subjects belonged to depression group. 3) There were significant relationships between depression and pain, life satisfaction, sleep pattern. 4) Significant factors influencing depression were life satisfaction, pain and sleep pattern. These factors explained 48% of depression in elderly women with ostearthritis. Among them, life satisfaction was the most significant factor. Conclusion: These finding give useful information for constructing an intervention and preventive program depression in the elderly women with osteoarthrtitis.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.12
• /
• pp.41-48
• /
• 2023

In this paper, we propose an analysis of recent trends in the NFT (Non-Fungible Token) industry using topic modeling techniques, focusing on their universal application across various industrial fields. For this study, patent data was utilized to understand industry trends. We collected data on 371 domestic and 454 international NFT-related patents registered in the patent information search service KIPRIS from 2017, when the first NFT standard was introduced, to October 2023. In the preprocessing stage, stopwords and lemmas were removed, and only noun words were extracted. For the analysis, the top 50 words by frequency were listed, and their corresponding TF-IDF values were examined to derive key keywords of the industry trends. Next, Using the LDA algorithm, we identified four major latent topics within the patent data, both domestically and internationally. We analyzed these topics and presented our findings on NFT industry trends, underpinned by real-world industry cases. While previous review presented trends from an academic perspective using paper data, this study is significant as it provides practical trend information based on data rooted in field practice. It is expected to be a useful reference for professionals in the NFT industry for understanding market conditions and generating new items.

• Journal of Intelligence and Information Systems
• /
• v.29 no.4
• /
• pp.91-110
• /
• 2023

The importance of manuals is emphasized because chemical accidents require swift response and recovery, and often result in environmental pollution and casualties. In this regard, the OECD revised OECD Guidelines for the Prevention, Preparedness, and Response to Chemical Accidents (referred to as the OECD Guidelines), in June 2023. Moreover, while existing research primarily raises awareness about chemical accidents, highlighting the need for a system-wide response including laws, regulations, and manuals, it was difficult to find comparative research on the attributes of manuals. So, this paper aims to compare and analyze the second and third editions of the OECD Guidelines, in order to uncover the information attributes and implications of the revised version. Specifically, TF-IDF (Term Frequency-Inverse Document Frequency) was applied to understand which keywords have become more important, and Word2Vec was applied to identify keywords that were used similarly and those that were differentiated. Lastly, a 2×2 matrix was proposed, identifying the topics within each quadrant to provide a deeper comparison of the information attributes of the OECD Guidelines. This study offers a framework to help researchers understand information attributes. From a practical perspective, it appears valuable for the revision of standard manuals by domestic government agencies and corporations related to chemistry.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.4
• /
• pp.393-402
• /
• 2024

The Korean Industrial Standard(KS) KS F 2527("Aggregates for Concrete") does not explicitly define criteria for clay mineral content in aggregates. This lack of clear quality standards and testing methodologies is further compounded by a scarcity of relevant research within both academic and industrial spheres. Consequently, the construction industry, encompassing both aggregate production and utilization, often overlooks the management of clay mineral content due to its perceived economic implications. This study addresses this gap by investigating the current state of regulations concerning clay mineral content in aggregates, exploring the causes of its occurrence, and evaluating its impact on concrete performance. The chemical composition of the clay minerals was determined to primarily consist of Al₂O₃, Fe₂O₃, and SiO₂, which are commonly found in clay. X-ray diffraction(XRD) analysis revealed that the predominant clay minerals were montmorillonite and illite, both known for their high absorption capacity. An examination of domestic and international standards for clay mineral content in aggregates demonstrated that the density and absorption rate specifications outlined in KS F 2527("Aggregates for Concrete") only offer indirect estimations of clay mineral levels. Furthermore, the investigation into the influence of clay mineral content on concrete performance suggests that a higher clay mineral content necessitates a corresponding increase in the unit quantity of aggregates to maintain adequate workability. This, however, has a detrimental effect on the compressive strength of the concrete.

• Korean Security Journal
• /
• no.37
• /
• pp.325-354
• /
• 2013

The concept of national security and the fundamental system for crisis management have departed from traditional methods and the importance of a national critical infrastructure crisis management has been emphasized. A national critical infrastructure crisis means a situation where human resource, material and functional system that may have a material effect on the critical functions of the government, the vitality and integrity of society, national economy and the safety of the public becomes disabled due to causes such as terrorism or major disasters. Although North Korea had been subject to numerous rounds of negotiations and sanctions as it continually developed nuclear weapons since the 1960s, it has also showed off its nuclear armaments through successful nuclear testings and missile launches. As the development and threat of North Korea's weapons of mass destruction becomes more noticeable and the range of its risk expands, this study focuses on the potential for an absence of leadership for national crisis management where the country's leadership, which should serve the critical role and function of handling national crises, becomes completely destroyed by the unexpected initial attacks by North Korea. As a result, the purpose of this study is to propose safety measures for the country's leadership in preparation for North Korea's threat of nuclear weapons by examining the concept and degree of risk of weapons of mass destruction with a focus on nuclear weapons, analyzing the substance of the threat of North Korean nuclear weapons and evaluating such threat. In conclusion, first, to ensure the normal functioning of a national crisis management system in the event of a national crisis, we must seek safety measures that conform to the scope and succession order of the leadership of the national crisis management for an Enduring Constitutional Government (ECG) and the Continuity Of Operations (COOP). Second, in the event of a national ceremony, the gathering of the country's leadership all together in an open place should be avoided. In unavoidable circumstances, the next in rank that will act on behalf of the current leader should be designated and relevant safety measures should be taken. Third, during time of peace, in preparation for national crises, the scope of protection for the country's leadership should be prescribed and specific security and safety measures should be implemented. Fourth, the succession order for acting president in the case of the death of the president pursuant to Articles 71 and 26(1) of the National Government Organization Act should reconsidered to see whether it is a reasonable provision that takes into consideration a national crisis management that corresponds to the threat of North Korean nuclear weapons and weapons of mass destruction. Pursuant to the Basic Guidelines for National Crisis Management set out under Presidential Directive No. 229, the Korean government is currently operating a case-by-case "crisis management standard manual" and its sub-manuals and has also prepared the Presidential Security Service's security and safety measure regulations regarding the acting president. Therefore, the Korean government should actualize the above points in the case-by-case crisis management standard manual and security and safety measure regulations regarding the acting president to implement and legislate them.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.4
• /
• pp.325-334
• /
• 2008

The standard prestressed concrete I-girder bridge (PSC I-girder bridge) is one of the most prevalent types for small and medium bridges in Korea. When determining the member forces in a section to assess the safety of girder in this type of bridge, the general practice is to use the simplified practical equations or the live load distribution factors proposed in design standards rather than the precise analysis through the finite element method or so. Meanwhile, the live load distribution factors currently used in Korean design practice are just a reflection of overseas research results or design standards without alterations. Therefore, it is necessary to develop an equation of the live load distribution factors fit for the design conditions of Korea, considering the standardized section of standard PSC I-girder bridges and the design strength of concrete. In this study, to develop an equation of the live load distribution factors, a parametric analysis and sensitivity analysis were carried out on the parameters such as width of bridge, span length, girder spacing, width of traffic lane, etc. As a result, the major variables to determine the size of distribution factors were girder spacing, overhang length and span length in case of external girders. For internal adjacent girders, the determinant factors were girder spacing, overhang length, span length and width of bridge. For internal girders, the factors were girder spacing, width of bridge and span length. Then, an equation of live load distribution factors was developed through the multiple linear regression analysis on the results of parametric analysis. When the actual practice engineers design a bridge with the equation of live load distribution factors developed here, they will determine the design of member forces ensuring the appropriate safety rate more easily. Moreover, in the preliminary design, this model is expected to save much time for the repetitive design to improve the structural efficiency of PSC I-girder bridges.

• The Korean Journal of Air & Space Law and Policy
• /
• v.29 no.1
• /
• pp.3-32
• /
• 2014

Safety Management System is the aviation industry policy for while operating the aircraft, to ensure the safety crew, aircraft and passengers. For operating a safe aircraft, in order to establish the international technical standards, the International Civil Aviation Organization has established the Annex 19 of the Convention on International Civil Aviation. As a result, member country was supposed to be in accordance with the policy of the International Civil Aviation Organization, to accept the international standard of domestic air law. The South Korean government announced that it would promote active safety management strategy in primary aviation policy master plan of 2012. And, by integrating and state safety programmes(ssp) and safety management system(sms) for the safe management of Annex 19 is to enforce the policy on aviation safety standards. State safety programmes(ssp) is a system of activities for the aim of strengthening the safety and integrated management of the activities of government. State safety programmes(ssp) is important on the basis of the data of the risk information. Collecting aviation hazard information is necessary for efficient operation of the state safety programmes(ssp) Korean government must implement the strategy required to comply with aviation methods and standards of the International Civil Aviation Organization. Airlines, must strive to safety features for safety culture construction and improvement of safety management is realized. It is necessary to make regulations on the basis of the aviation practice, for aviation safety regulatory requirements, aviation safety should reflect the opinion of the aviation industry.