• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.425-430
• /
• 2017

RFID is a technology that uses radio frequency to read information in tags attached to objects or people. Because it reads the information without contact when tracking the location using tags in a RFID system, there can be errors between the actual position and measured position. In this paper, three methods (the method of radiation pattern, the method of the median value, and the method using both the radiation pattern and median value) are proposed to identify the location of objects or people using the RFID technique. The location identification system based on RFID was constructed and tags were arranged in a square pattern. The real location and experimentally predicted location of an object containing a reader were compared to confirm the error. Instead of the existing papers that obtained the approximately location of a reader by calculating the center of gravity of all tags read by that reader, in this study, the predicted location was obtained by the median value and the radiation pattern. This study validated which method was the most efficient among the three methods proposed in this paper through the data of the read tags. As a result, the method of the median value had the smallest error among those assessed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.1
• /
• pp.27-33
• /
• 2006

Evaluating comfort of illumination environment of building interior is recognizing the degree of glare causing discomfort. Currently, to use the experimental formula for discomfort glare studied abroad it would be not appropriate because each races feel about the degree of glare differently. Therefore, this study aim to make up prediction formula for evaluating discomfort glare reasonably from Koreans' vision and it proceeded with 4 stages as follows: First, after reviewing the existing discomfort glare evaluation formula, I selected experimental variables. Second, I made a mock-up that I can control experimental variables and conditions according to the purpose of this study. Third, 1 conducted discomfort glare evaluation experiment. Finally, compared with UGR evaluation method suggested for Westerner in prior studies. In conclusion, 1) it's proved that discomfort glare is influenced highly by a light source luminance, background luminance and location of testee and the line of vision. 2) In interior discomfort glare experiment whether the glare light source is placed within range of vision or not has more significant influence than the distance between the light source and testee. 3) I compared and analyzed with UGR, the most representative discomfort glare evaluation system and I found there is a little difference in the results. This shows discomfort glare of Koreans and Westerners are different.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.770-776
• /
• 2021

Positioning systems have been actively researched and developed over the past few years and have been used in many applications. This paper presents a method to determine a location in a large space using a sensor system consisting of an accelerometer and a single-axis gyroscope. In particular, to consider usability, a sensor device was loosely worn on the waist so that the experimental data could be used in practical applications. Based on the experimental results of circular tracks with radiuses of 1m and 3m, in this paper, an algorithm using the threshold of rotation angle was proposed and applied to the experimental results. A tracking experiment was performed on the grid-pattern track model. For raw sensor data, the average deviation between the final tracking point and the target point was approximately 15.2 m, which could be reduced to approximately 4.0 m using an algorithm applying the rotation angle threshold.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.1
• /
• pp.125-132
• /
• 2022

In this paper, we presented a cart which can automatically transport loads to the distribution center of the appointed indoor place, based on Raspberry pi 4. It can recognize the obstacles by using the ultrasonic sensors so that it prevents the collision and takes a detour. Further, we entered the direction control code in the RFID. It has installed at important points such as the intersections of the destinations, so that if the RFID reader of the cart senses the RFID, the cart would stop or change the direction. After the transportation, if the load cell(weight sensor) recognizes that the baggage is unloaded, the cart returns to the initial point and would be retrieved. Therefore, we embodied the transportation cart which reduces the use of manpower and solves the problems conveniently across the transportation strategies.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.1
• /
• pp.94-106
• /
• 2020

Recently, the radio navigation method utilizing the GPS(Global Positioning System) satellite information is widely used as the method to measure the position of objects. As GPS applications become wider and fields based on various positioning information emerge, new methods for achieving higher accuracy are required. In the case of autonomous vehicles, the INS(Inertial Navigation System) using the IMU(Inertial Measurement Unit), and the DR(Dead Reckoning) algorithm using the in-vehicle sensor, are used for the purpose of preventing degradation of accuracy of the GPS and to measure the position in the shadow area. However, these positioning methods have many elements of problems due not only to the existence of various shaded areas such as building areas that are continually enlarged, tunnels, underground parking lots and but also to the limitations of accumulation-based location estimation methods that increase in error over time. In this paper, an efficient positioning method in a large underground parking space using Fingerprint method is proposed by placing the AP(Access Points) and directional antennas in the form of four anchors using WLAN, a popular means of wireless communication, for positioning the vehicle in the GPS shadow area. The proposed method is proved to be able to produce unchanged positioning results even in an environment where parked vehicles are moved as time passes.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.6
• /
• pp.275-280
• /
• 2010

Recently, This paper suggests that LED-ID technique applying positioning method for LED light. also, Authors in this paper has launched this investigation earnestly. However, there are various interferences such as MPI(Multi Path Interference) by reflected waves of the surface and interfere factors by their correlation properties of the ID in LED-ID wireless channel. Therefore, in this paper, we propose a novel OOK(On-Off Keying)-CDMA(Code Division Multiple Access) system using unipolar ZCD(Zero Correlation Duration) spreading code and verify the availability of the proposed system via the evaluation performance simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.165-170
• /
• 2015

The topic of this paper is the advanced absolute altitude determination for 3-D positioning using barometric altimeter and the reference station. Barometric altimeter does not provide absolute altitude because atmosphere pressure always varies over the time and geographical location. Also, since Global Navigation Satellites system such as GPS, GLONASS has geometric error, the altitude information is not available. It is the reason why we suggested the new method to improve the altitude accuracy. This paper shows 3-D positioning algorithm using absolute altitude determination method and evaluates the algorithm by real field tests. We used an accurate altitude from RTK system in Seoul as a reference data and acquired the differential value of pressure data between a reference station and a mobile station equipped in low cost barometric altimeter. In addition, the performance and advantage of the proposed method was evaluated by 3-D experiment analysis of PNS and CNS. We expect that the proposed method can expand 2-D positioning system 3-D position determination system simply and this 3-D position determination technique can be very useful for the workers in the field of fire-fighting and construction.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.1
• /
• pp.49-54
• /
• 2023

The Global Positioning System (GPS) was developed for military purposes and developed as it is today by opening civilian signals (GPS L1 frequency C/A signals). The current satellite orbits the earth about twice a day to measure the position, and receives more than 3 satellite signals (initially, 4 to calculate even the time error). The three-dimensional position of the ground receiver is determined using the data from the radio wave departure time to the radio wave Time of Arrival(TOA) of the received satellite signal through trilateration. In the case of navigation using GPS in recent years, a location error of 5 to 10 m usually occurs, and quite a lot of areas, such as apartments, indoors, tunnels, factory areas, and mountainous areas, exist as blind spots or neutralized areas outside the error range of GPS. Therefore, in order to acquire one's own location information in an area where GPS satellite signal reception is impossible, another method should be proposed. In this study, IMU(Inertial Measurement Unit) combined with an acceleration and gyro sensor and a geomagnetic sensor were used to design a system to enable location recognition even in terrain where GPS signal reception is impossible. A method to track the current position by calculating the instantaneous velocity value using a 9-DOF IMU and a geomagnetic sensor was studied, and its feasibility was verified through production and experimentation.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.1319-1324
• /
• 2006

최근 다양한 분야(건축, 디자인, 영화관)에서 활용되는 디스플레이 기술들은 대체로 평면에 투영하는 프로젝션 기술을 사용하고 있다. 예외적으로 평면이 아닌 곡면에 투영하는 경우도 있었으나, 기술적인 제약으로 왜곡된 영상을 보정하여 사용하는 경우는 드문 상태이다. 그리고 상호작용의 경우는 기계적 장치에 의존한 초보적 형태가 주류를 이루고 있다. 본 논문에서는 프로젝션 기술 중에서 원통형 곡면상으로의 투영 기법과 모션인식을 반영한 상호작용 기법에 대해서 논하고자 한다. 3D 영상을 곡면에 왜곡 없이 투영하기 위하여, 본 논문에서는 '2-pass 렌더링' 기법을 이용하였다. 이 기법에서는 현재 렌더링 된 영상을 텍스쳐로 저장한 다음 원통형 물체에 매핑시켜 곡면에 적합한 영상으로 보정한다. 그리고 기계적 장치에 의존하지 않는 상호작용을 위해, 카메라를 통하여 실시간으로 사용자 정보(위치, 방향 값)를 입력 받아 원통형 스크린과 매칭되는 좌표 값을 계산한다. 위와 같은 기법들을 구현하기 위한 실험으로 미디어 아트 작품을 제작하였으며, 투영과 상호작용에 관한 알고리즘을 작품에 적용하였다. 이 작품은 하나의 프로젝터를 사용하여 1/4 원통형 곡면으로의 투영과 상호작용을 수행하였다. 본 연구의 결과는 미디어 아트 작품의 프로젝션 모듈로 사용 될 수 있으며, 공연장 건축, 실내디자인, 체감형 인터랙티브 게임, 가상현실 영화관 등 다양한 분야에 적용 될 수 있다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.2
• /
• pp.75-82
• /
• 2016

Visible light communication (VLC) using LED lamps is suitable for implementing an indoor positioning system in an indoor environment where the global positioning system (GPS) signal does not reach. In this paper, we present an indoor positioning system for mobile robots using a VLC beacon and fuzzy rules. This system consists of an autonomous mobile robot, VLC modules, and device application software. Fuzzy rules are applied to plan the global and local paths along which the mobile robot navigates indoors. The VLC transmitter modules are attached to the wall or the ceiling as beacons to transmit their own location information. The variable pulse position modulation (VPPM) algorithm is used to transmit data, which is a new modulation scheme for VLC providing a dimming control mechanism for flicker-free optical communication. The mobile robot has a receiver module to receive the location information while performing its mission in the environment where VLC transmitters are deployed.