• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.167-167
• /
• 2017

스마트팜 내부의 3차원 공간의 온도, 습도, 기압, 공기질 분석을 통한 돈사 미세 조절 기술에 대한 연구가 진행 중이다. 해당 특성 중에서 기압을 제외한 환경인자들은 돈사 내의 구조 특성상 위치별로, 시간별로 매우 상이한 변이의 형태를 보인다. 일정 시점을 기준으로 계측 지점 이외의 지점에 대한 환경인자들을 공간적으로 추정하는 기술은 대표적으로 컴퓨터 분석 기술에 의존하고 있다. 시간 복잡도가 매우 높은 CFD(Computer Fluid Dynamics) 방식은 정밀도 측면에서 유리하나, 상응하는 제어 기술/하드웨어 등의 부재로 모델링 결과의 활용도가 낮다고 볼 수 있다. 본 연구에서는 CFD를 수행하는 과정에 있어 실질적으로 유효한 단위로 공간 분해능을 낮추고, 동등한 크기의 세부 공간에 대한 모델링을 병렬적으로 수행하기 위한 방안을 연구하였다. 실험적으로 돈사 환경을 3차원으로 구성하기 위하여, 공기 흡입구, 배출구, 기둥, 덕트 요소를 포함시켰다. 실내 공간을 1차적으로 가로, 세로, 높이방향으로 $3{\times}3{\times}3$ 균등 분배한 후 3차원 행렬로 분할하였다. 각 분할된 행렬에 대한 연산 수행을 위하여 현재까지 대중에 공개된 SBC(Single Board Computer) 중 가장 높은 연산 수행 능력이 있는 Odroid-XU4(Hardkernel, AnYang, Korea) 16식을 병렬 클러스터링 기술로 연동하였다. 하나의 AP당 8개의 코어가 내장되어 있으므로, 총 128개의 코어를 이용하여 동시에 128개의 3D 정방행렬 연산이 가능하도록 구성하였다. 모델링을 위한 수학적 모델로는 실험적으로 Steady turbulent model (Newtonian coefficient)을 이용하였다. 클러스터링을 이용한 병렬 처리의 특성상 균등한 정보량을 동시에 배분해야 하므로 108 ($27{\times}4$)개의 코어를 이용하여 1차적으로 나뉜 공간을 다시 4등분하여 동시에 $12{\times}12{\times}12$에 해당하는 공간 분해능에 대한 처리를 동시에 수행할 수 있도록 하였다. 2단계에 걸쳐 분할한 공간 세그먼트에 대한 클러스터링 연산 수행 결과 초당 15회 정도의 연산을 수행할 수 있었으며, 시간 분해능을 100으로 설정한 경우 약 5초가 수행되었다. 선행적으로 수행하였던 CFD 모델링 (OpenFOAM)과 비교하였을 때 상대적으로 정밀도가 낮은 3차원 모델링 결과를 얻을 수 있었다. 모델링에 소요되는 시간을 비약적으로 경감 시킨 장점을 살려 적정한 공간 분할 기법과 추가로 발생하는 다수의 바운더리 조건을 근사적으로 추정할 수 있는 데이터 마이닝 기술이 보완되어야 할 것이다.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.7
• /
• pp.343-352
• /
• 2007

The present study aims to investigate the design standard for acoustic criteria of Korean traditional music which could be used for the design of Korean traditional music halls. In order to do this, subjective listening tests were undertaken to musicians using auralized sounds which were convolved with the impulse response of traditional instruments recorded in an anechoic chamber. 94 pairs of sound were made which have different value of acoustic parameters including RT, BR, Brilliance, G, C80, ITDG, IACC. A paired comparison method(PCM) was used to analyze the results from the subjective listening tests. The results show that the preference of acoustic criteria for the Korean traditional music is far different from those of western music. As a result, specific range of acoustic criteria were suggested for the appropriate acoustic conditions of Korean traditional music. Also, a guideline of the acoustic design of halls for performing the Korean traditional music was suggested which could be used as a basic reference in the future works.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.4
• /
• pp.387-402
• /
• 2014

In congested urban areas, constructions of tunnel structures have became necessary due to a lack of surface space. The excavation of any tunnel generated the ground disturbances of surrounding ground and displacements is major concern. Therefore, a study of tunnel stability is necessary. In this study, the authors have investigated the stability and failure pattern of tunnel through the model tunnel test. In this study, the close range photogrammetry was used to measure the ground deformation. The measured data was converted to displacement vectors and contours. And then it compared to FE analysis and empirical formula. In addition, this study presented the comparison between steel pipe reinforced model tunnel and unreinforced model tunnel. The ground deformation for both the steel pipe reinforced model tunnel and the unreinforced model tunnel was analysed.

• Science of Emotion and Sensibility
• /
• v.22 no.2
• /
• pp.101-108
• /
• 2019

The aim of this study was to verify differences in autonomic responses that are affected by the configurations of one-room type units using an electrocardiogram (ECG). Accordingly, 43 one-room units that were collected randomly were classified into ten different types of floor plan configurations mainly according to the location of the bathroom and kitchen. An ECG was subsequently measured for each plan type and the average ratio of the LF/HF (Power in low frequency range/Power in high frequency range) was calculated to measure the comfort level of each space. The results revealed a significant statistical difference between the average LF/HF ratio between the plan types (p < 0.05) and provided compelling evidence suggesting that the configuration of the plan may affect the quality of one-room space. This approach appears to be effective in counteracting stress that may exacerbate psychological disorders in single person households.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.861-863
• /
• 2014

Fingerprinting technique exists at the position assumption system for the service of indoor location-based. However, there is a problem it takes a long time to build fingerprinting map. We need to verify that received signal of WAP(wireless access point) is similar at all times in a similar space in order to solve these problems. This paper proposes a plan that is able to build fingerprinting map by using the received signal data of WAP. To do this, change the positon of WAP in the same space, It is confirmed the process of change of the RSSI corresponding to the distance. We also confirmed that the RSSI collected from elsewhere in the space a similar change in the same manner.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.3
• /
• pp.175-185
• /
• 2020

Three-dimensional registration is a process of matching data with or without a coordinate system to a reference coordinate system, which is used in various fields such as the absolute orientation of photogrammetry and data combining for producing precise road maps. Three-dimensional registration is divided into a method using points and a method using linear features. In the case of using points, it is difficult to find the same conjugate point when having different spatial resolutions. On the other hand, the use of linear feature has the advantage that the three-dimensional registration is possible by using not only the case where the spatial resolution is different but also the conjugate linear feature that is not the same starting point and ending point in point cloud type data. In this study, we proposed a method to determine the scale and the three-dimensional translation after determining the three-dimensional rotation angle between two data using quaternion to perform three-dimensional registration using linear features. For the verification of the proposed method, three-dimensional registration was performed using the linear features constructed an indoor and the linear features acquired through the terrestrial mobile mapping system in an outdoor environment. The experimental results showed that the mean square root error was 0.001054m and 0.000936m, respectively, when the scale was fixed and if not fixed, using indoor data. The results of the three-dimensional transformation in the 500m section using outdoor data showed that the mean square root error was 0.09412m when the six linear features were used, and the accuracy for producing precision maps was satisfied. In addition, in the experiment where the number of linear features was changed, it was found that nine linear features were sufficient for high-precision 3D transformation through almost no change in the root mean square error even when nine linear features or more linear features were used.

• Journal of KIISE
• /
• v.44 no.3
• /
• pp.332-337
• /
• 2017

When using IFC data consisting of STEP schema based on the EXPRESS language, it is not easy for collaborating project stakeholders to share BIM modeling shape information. The IFC viewer application must be installed on the desktop PC to review the BIM modeling shape information defined within the IFC, because the IFC viewer application not only parse STEP structure information model but also process the 3D feature construction for a 3D visualization. Therefore, we propose a lightweight data structure design for web visualization by parsing IFC data and constructing 3D modeling data. Our experimental results show the weight reduction of IFC data is about 40% of original file size and the web visualization is able to see the same quality with all web browsers which support WebGL on PCs and smartphones. If applied research is conducted about the web visualization based on IFC data of the last construction phase, it could be utilized in various fields ranging from the facility maintenance to indoor location-based services.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.10
• /
• pp.1376-1383
• /
• 2020

Although studies on fire evacuation systems are increasing, studies on the evacuation of evacuees in indoor spaces are insufficient. According to the latest research, it has been suggested that the use of high frequency might be effective for identifying the location of evacuees indoors. Accordingly, in this paper, the authors intend to develop evacuation location recognition technology and fire evacuation guidance system using high-frequency and a smartphone. The entire system was developed, including an app server, evacuees location recognition unit, an evacuation route search, an output unit, and a speaker unit based on Wi-Fi communication. The experimental results proved the possibility of the effectiveness of the system in the fire situation data. It is expected that this study could be used as an essential study of a fire evacuation guidance system using high frequency data in case of fire.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1457-1462
• /
• 2021

Untact order payment has become a new normal since the COVID-19. BLE beacon is a technology that supports low-power wireless communication within 70 meters without Bluetooth pairing and is specialized for indoor positioning. Therefore, it is suitable for building and providing O2O services beyond B2C and B2B services. However, beacons have a lower utilization rate because they have fewer platforms than wifi that support long-distance wireless communication. Therefore, this paper aims to provide more convenient non-face-to-face related services than before by designing and proposing an O2O service platform using BLE beacons. When scanning beacons, not only does it receive advertising data that beacons have, but it also ensures that the actual distance between the user's terminal and beacons is accurately calculated. Through accurate location, the O2O service platform will be able to provide users with store information, such as coupons and discounts, museum exhibits, and traffic information at the right time.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.3
• /
• pp.139-145
• /
• 2024

Since COVID-19, most of people's main living spaces have been moved indoors. Due to this influence, many people's interest in companion plants continues to rise. People who raise companion plants often raise them for the purpose of emotional stability or air purification. In fact, plants have the effect of giving people a sense of emotional stability and the ability to purify indoor air is excellent depending on what kind of plant they are. However, if you do not have knowledge of plants, you will not know which plants have excellent air purification effects, and even if you grow them, you will face a problem that withers quickly. Therefore, in this paper, we develop an app that provides users who do not have prior knowledge to store and manage their MBTI and member information in a database using databases and MBTI, and based on this, recommend plant data that fits their preferences with the user and manage their schedules through calendars.