• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.357-362
• /
• 2021

UWB(ultra wide band) communication systems employ short pulses to transmit information which spreads the signal energy over a very wide frequency spectrum. Received signal-to-noise power ratio of UWB signals is an important factor in determining the accuracy of a positioning system. As the signal to noise power ratio gets higher, positioning errors decrease since noise becomes less effective. Calculation of signal to noise power ratio as a function of communication distance provides important guidelines for the system design. And the performance of a positioning system also depends heavily on the channel model. As a result of the analysis, it was found that the performance of the received signal to noise power ratio according to the communication distance was better in the LOS channel environment than in the Non LOS(line of sight) channel environment. And as the symbol interval of the preamble signal increases at a specific communication distance, the channel capacity of the UWB system increases.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.12
• /
• pp.17-25
• /
• 2020

The artificial ground freezing method is a ground amelioration technology that does not have a permanent effect on the ground. One of the key factors that determine the efficiency and design criteria of the artificial ground freezing is the groundwater flow. Therefore, in order to accurately evaluate the behavior of the artificial ground freezing, studies on the effect of water flow on the formation of ice walls must be preceded. In this paper, experimental and numerical analyses were conducted using only pure water to maximize the effect of water flow on the formation of ice walls. A hydro-thermal coupled model for freezing behavior was proposed and the accuracy of the model was verified. Through the numerical and experimental studies, the flow rate dominates not only the formation time but also the shape of the ice wall. In addition, this study proposes a method to indirectly predict the ice wall formation time, which is expected to be highly useful for a practical application where it is difficult to visually identify ice walls.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.1
• /
• pp.21-33
• /
• 2010

In this paper, the consolidation and the permeability characteristics of Songdo were evaluated based on the laboratory and field tests. The test results indicate that silty clay layer above approximately E.L-15 m are consolidation layer, and sand layers embedded in consolidation layers are drainage layers. Consolidation layer was overconsolidated state before the reclamation work; however, it transferred to normalized state after the reclamation work. In addition, the average and the range of consolidation properties and magnitude of anisotropy of coefficient of consolidation were evaluated according to the soil types such as clay, silty, and clayey silt since these properties are sensitive to soil types. These analysis results can be used as preliminary design parameters of consolidation and permeability m Songdo area.

• Journal of Bio-Environment Control
• /
• v.20 no.2
• /
• pp.78-82
• /
• 2011

Ventilation rates, inside and outside weather data were measured in a arch-shape single-span plastic greenhouse growing tomatoes. On the roof of the experimental greenhouse, round windows which have a diameter of 0.6 m were installed at intervals of 8m. It showed that the number of air changes in this greenhouse were average 0.17 volumes per minute and in the range of 0.02 to 0.32 volumes per minute. These air changes are insufficient to meet the recommended ventilation rate for commercial greenhouses, and it is estimated that interval of 6 m is appropriate for spring or fall season. For summer season, it is necessary to narrow the space or to enlarge the open area of roof windows. Using the heat balance model, the evapotranspiration coefficients of greenhouse tomatoes were estimated from experimental ventilation data, overall heat transfer and solar radiation. It showed that the evapotranspiration coefficients were average 0.62 and in the 0.39 to 0.85 range. We suggest applying 0.6 as the evapotranspiration coefficient in design of ventilation for the single-span tomato greenhouses.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.2
• /
• pp.72-78
• /
• 2011

Localization information of an object can be a very useful element for many application areas. Presently, GPS is typically used for it, but many researches on the wireless localization technology are going on recently actively using mobile communication network, wireless sensor network, and ad hoc network in order to overcome the limitations of the GPS such as indoor, cost, power consumption, and etc. Therefore, this article surveys the most representative wireless localization techniques, which can be deployed in the wireless networks, and their principles and performances are analyzed based on the researched papers. In a conclusion, selection of a localization technique should consider the key design elements to a given application from the design elements such as localization environment, accuracy, time to fix, computation amount, implementation ease, and etc.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.4
• /
• pp.47-54
• /
• 2005

The improvement of perspectives on dark and limited underground space could be an important factor in successful underground space development. The Current trend in the apartment underground parking garages requires not only quantitatively energy efficient design and operation but also qualitative improvement of the space. For this, we need to consider two factors: Firstly, to understand the characteristics of the lamps; Secondly, to improve the uniformity ratio of illuminance. In a winter season, a way to keep the uniformity and a method not to lower the indoor illuminance level by cold ambient air should be established. Therefore, a change in interval and arrangement of the lighting fixtures is required. Also, in their operations, the current time-fixed control method needs to be changed into the control which method considers the use pattern.

• Journal of Sensor Science and Technology
• /
• v.17 no.3
• /
• pp.168-177
• /
• 2008

An indoor environmental monitoring system using IEEE 802.15.4 based wireless sensor network is proposed to monitor the amount of pollutant entering to the room from outside and also the amount of pollutant that is generated in indoor by the building materials itself or human activities. Small-size, low-power wireless sensor node and low power electrochemical sensor board is designed to measure the condition of indoor environment in buildings such as home, offices, commercial premises and schools. In this paper, two query models, the broadcasting query protocol and flooding query protocol, were designed and programmed as a query-based routing protocol in wireless sensor network for an environment monitoring system. The flooding query routing protocol in environment monitoring is very effective as a power saving routing protocol and reliable data transmission between sensor nodes.

• KIEAE Journal
• /
• v.11 no.1
• /
• pp.29-38
• /
• 2011

This study suggested practical application of climate design on apartment complex with the focus on the use of Cold Air Flow and green building design method. The domestic research on the wind path analysis has been associated since the early 21th century in urban planning and site planning, this initiative study aimed to mitigate the urban heat island effect and to promote the sustainable urban development. It is, however, mostly focused on the flow analysis and heat flow in the urban context, due to the poor application of the wind path analysis in actual planning and design. Special attention is paid to the possibilities of identifying and developing the application methods in relation to Cold Air Flow and building design. This study examined these relations and suggested some trenchant approach to a more comprehensive and efficient use of the wind flow analysis in climate design.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.287-291
• /
• 2010

In this paper, we designed and implemented mobile object automatic system based on senor networks for telematics. For developing this system, we gather the various sensing data through wireless communication method using zigbee sensor networks and analyze them in monitoring equipment. And we enable the driver to recognize the car state information on the whole by interfacing analyzed data to telematics unit. And, we implemented automatic controller that can control temperature and humidity in car automatically by actuating air conditioner based on the data that was monitored throughout temperature sensor, humidity sensor and brightness sensor based on sensor networks.

• Journal of Broadcast Engineering
• /
• v.8 no.2
• /
• pp.153-162
• /
• 2003

This paper describes a structure of adaptive equalizer to improve reception performance of ATSC digital television (DTV) for 8-VSB receivers. There are many strong and dynamic echoes affecting reliable reception of DTV signal. Conventional DFE based least mean square (LMS) algorithm is readily implemented and has good Performance. There are still problems to be solved, however, in handling strong echoes and indoor reception. In this paper, structure of adaptive equalizer to mitigate these Problems in strong multipath interference conditions and indoor reception environment is first presented. Methods to reduce error propagation effects on DFE and initialization scheme of filter coefficients for fast convergence are then introduced. Computer simulation results prove that an adaptive equalizer with proposed design methods can combat with Brazil Ensemble and the Threshold of Visibility(TOV) is improved.