• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.2
• /
• pp.65-72
• /
• 2011

In this paper, a real-time monocular vision based navigation system is developed for the disabled people, where online background learning and vector field histogram are used for identifying obstacles and recognizing avoidable paths. The proposed system is performed by three steps: obstacle classification, occupancy grid map generation and VFH-based path recommendation. Firstly, the obstacles are discriminated from images by subtracting with background model which is learned in real time. Thereafter, based on the classification results, an occupancy map sized at $32{\times}24$ is produced, each cell of which represents its own risk by 10 gray levels. Finally, the polar histogram is drawn from the occupancy map, then the sectors corresponding to the valley are chosen as safe paths. To assess the effectiveness of the proposed system, it was tested with a variety of obstacles at indoors and outdoors, then it showed the a'ccuracy of 88%. Moreover, it showed the superior performance when comparing with sensor based navigation systems, which proved the feasibility of the proposed system in using assistive devices of disabled people.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.11
• /
• pp.107-114
• /
• 2022

In this paper, proposes a delivery robot that can be autonomous driving learning. The proposed robot is designed to be used in park-type apartments without ground parking facilities. Compared to the existing apartments with complex ground and underground routes, park-type apartments have a standardized movement path, allowing the robot to run stably, making it suitable for students' initial education environment. The delivery robot is configured to enable delivery of parcels through machine learning technology for route learning and autonomous driving using cameras and LiDAR sensors. In addition, the control MCU was designed by separating it into three parts to enable learning by level, and it was confirmed that it can be used as a delivery robot for learning through operation tests such as autonomous driving and obstacle recognition. In the future, we plan to develop it into an educational delivery robot for various delivery services by linking with the precision indoor location information recognition technology and the public technology platform of the apartment.

• Journal of Advanced Navigation Technology
• /
• v.15 no.5
• /
• pp.696-704
• /
• 2011

In this paper, we propose a mobile robot navigation algorithm using data fusion of a monocular camera and ultrasonic sensors. Threshold values for binary image processing are generated by a fuzzy inference method using image data and data of ultrasonic sensors. Threshold value variations improve obstacle detection for mobile robot to move to the goal under poor illumination environments. Obstacles detected by data fusion of camera and ultrasonic sensors are expressed on the grid map and avoided using the circular planning algorithm. The performance of the proposed method is evaluated by experiments on the Pioneer 2-DX mobile robot in the indoor room with poor lights and a narrow corridor.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.2
• /
• pp.227-233
• /
• 2015

In this study, an indoor test environment was developed for studying the vision stabilizer of an unmanned vehicle, using a virtual environment and a 6-axis motion simulator. The real driving environment was replaced by a virtual environment based on the Aberdeen Proving Ground bump test course for military tank testing. The vehicle motion was reproduced by a 6-axis motion simulator. Virtual reality driving courses were displayed in front of the vision stabilizer, which was located on the top of the motion simulator. The performance of the stabilizer was investigated by checking the image of the camera, and the pitch and roll angles of the stabilizer captured by the IMU sensor of the camera.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.4
• /
• pp.279-285
• /
• 2016

In this paper, a platform design of caterpillar typed electrical vehicle is proposed. Nowadays, there have been many researches on mobile robots in the various ways. Many different fields such as military, exploration, agricultural assistance and disaster relief have applied the mobile robot. Design condition of stable angle, upset angle is reflect to caterpillar typed electrical vehicle. To experiment, developed a caterpillar typed electrical vehicle and design a driving controller. Developed caterpillar typed electrical vehicle is tested about operating and driving. Test environment is consisted of driving on flatland and climbing 15 degree and outdoor 40 degree slope. It is confirmed that developed tracked electric vehicular robot can driving and climbing.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.283-284
• /
• 2023

자율주행 경진대회에서 학생들의 장애물 후에 경로를 생성 능력을 검정하는 라바콘 추종 종목은 중요한 항목 중의 하나이다. 라바콘의 위치를 알기 위해서는 라이다 센서가 필요하다. 실내의 경우 저가의 2D 라이다 센서를 사용하여 콘의 위치 검출이 가능하지만, 실외의 경우에는 고가의 3D 라이다 센서 또는 고가의 3차원 카메라가 필요하다. 이러한 고가의 기자재는 실습의 대중화에 걸림돌이 되고 있으므로, 1개의 카메라와 인공지능을 이용한 라이다 콘의 검출하는 방법을 개발하였고, 이를 활용하여 경로 생성 및 제어를 수행하였다. 그 결과 0.4m 이내의 정밀도로 콘의 위치 추정과 주행을 성공적으로 수행하였다.

• Journal of KSNVE
• /
• v.10 no.5
• /
• pp.806-810
• /
• 2000

This paper presents a practical method for reduction of interior noise and improvement of sound quality in compartment of passenger car. The tested vehicle has a booming noise problem at rear passenger seats. In order to identify the transfer path of interior noise, the running modal analysis, the vibro-acoustic frequency transfer response and the noise path analysis are systematically employed. Using these various methods, it has been founded that the rear part of the roof of the test car was a noise source for the booming noise. Through the modification of the roof, the booming noise has been reduced and sound quality inside car also has been improved.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2351-2353
• /
• 2005

본 논문은 포장도로의 표면 상태를 고성능의 레이저 변위 센서를 사용하여 정밀하게 측정하고, GPS(Global Positioning System)를 사용하여 측정 위치 데이터를 획득하는 도로 표면 측정 장비 개발에 관한 논문이다. 본 연구에서는 전체 시스템을 설계하고, 차량 주행을 모사한 실험 모형을 제작하여 실내 실험을 실시하였으며, GPS 단말기로부터 실시간으로 위치 신호를 수신하여 도로면 데이터와 연동할 수 있도록 하였다. 그리고 평가 차량의 전면에 레일(rail)을 장착하여 레이저 변위 센서가 좌우로 왕복운동이 가능하도록 하였으며, 레일을 작동시킨 상태에서 도로면을 측정해 보았다. 실험 모형의 측정 곁과는 차량이 80km/h로 주행할 때 도로 표지 타이닝(tinning)의 폭 오차 3.24%, 깊이 오차 5%였다. 차량이 정지된 상태에서 레일을 작동시켜 요철을 측정하였을 경우 레일 방향에 대한 폭 오차는 0.07%였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.7
• /
• pp.817-822
• /
• 2014

Since the opening of the double-track railway for the Gyeongchun local electric train and the semi-high speed train ITX, floating population between Seoul and Chuncheon has rapidly increased. This is attributable to the competitiveness of the railway service in terms of punctuality and safety of operation, mass transportation and low fare. However, many passengers have expressed strong dissatisfaction and displeasure towards the interior noise and its high rate of increase, particularly in tunnel sections. In this study, the interior noise characteristics of Gyeongchun local electric train and ITX were analyzed and compared. Noise levels, frequency spectrum and sound quality indices were compared for the open land, tunnel and bridge. Finally, from the noise levels depending on the location in the vehicle compartment, the noise transmission path was determined and a basic strategy for reducing the interior noise was developed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.31-38
• /
• 2017

As the structure of a construction, such as a building and a shopping mall, becomes more wide and complex, it is difficult for an user to find out a path to a desginated destination. However, since the existing navigation systems exploit the Global Positioning System in order to measure a current position, it is impossible to be used on the indoor environment. To solve this problem, we propose an indoor navigation system using beacon signal. The proposed system connects to a pre-installed beacon exploiting bluetooth on the user's smartphone. After receiving the data of the beacon, the system generates and displays a path based on the destination which the user put on and the current position measured by the beacon's data. The implemented indoor navigation system has the benefit to show the path to the destination easily at the complex indoor structure.