• Journal of Broadcast Engineering
• /
• v.23 no.6
• /
• pp.855-865
• /
• 2018

Sound event detection is one of the research areas to model human auditory cognitive characteristics by recognizing events in an environment with multiple acoustic events and determining the onset and offset time for each event. DCASE, a research group on acoustic scene classification and sound event detection, is proceeding challenges to encourage participation of researchers and to activate sound event detection research. However, the size of the dataset provided by the DCASE Challenge is relatively small compared to ImageNet, which is a representative dataset for visual object recognition, and there are not many open sources for the acoustic dataset. In this study, the sound events that can occur in indoor and outdoor are collected on a larger scale and annotated for dataset construction. Furthermore, to improve the performance of the sound event detection task, we developed a dual CNN structured sound event detection system by adding a supplementary neural network to a convolutional neural network to determine the presence of sound events. Finally, we conducted a comparative experiment with both baseline systems of the DCASE 2016 and 2017.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.3
• /
• pp.162-168
• /
• 2003

The degree of diffusion, characterized by the "scattering coefficient" of surface materials, has been known to be one of the most important factors in determining the acoustical qualities of concert halls. Based on the suggested ISO method, which measures the random-incidence scattering coefficient of surfaces in a diffuse field, the scattering coefficients of different sizes and densities of wooden hemispheres and cubes were measured in model-scale reverberation rooms. As a result, wooden hemispheres with a structural depth of more than 15㎝ have the highest average (500㎐∼4㎑) scattering coefficient. It was also found that the scattering coefficient becomes higher when the diffuser density reaches about 50% for hemispheres and 30% for cubes.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.6
• /
• pp.437-445
• /
• 2004

In this paper. we describe a novel method for transforming audio contents according to user's preference on sound field. Sound field effect technologies. which transform or simulate acoustic environments as user's preference, are very important for enlarging the reality of acoustic scene. However huge amount of computational power is required to process sound field effect in real time. so it is hard to implement this functionality at the portable audio devices such as MP3 player. In this paper, we propose an efficient method for providing sound field effect to audio contents independent of terminal's computational power through processing this functionality at the server using user's sound field preference, which is transfered from terminal side. To describe sound field preference, user can use perceptual acoustic parameters as well as the URI address of room impulse response signal. In addition, a novel fast convolution method is presented to implement a sound field effect engine as a result of convoluting with a room impulse response signal at the realtime application. and verified to be applicable to real-time applications through experiments. To verify the evidence of benefit of proposed method we performed two subjective listening tests about sound field descrimitive ability and preference on sound field processed sounds. The results showed that the proposed sound field preference can be applicable to the public.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.327-327
• /
• 2010

자동차에서 실내음질은 구매결정 요소들 중의 하나로 그 중요성이 점차 증가하고 있다. 따라서 다양한 운전조건에서 운전자가 기대하는 실내음질의 기대 수준을 충족시켜야 한다. 소비자는 운전경험과 습관에 따라 기대하는 음질에 차이가 있고 소리에 대한 표현방식도 모호하기 때문에 이러한 주관적 특성을 하나의 통일된 표현으로 정의 하기가 어렵다. 그러나 지난 이십여 년 동안의 음질개발과 차량 실내소음 주관평가의 통계처리로 통일된 표현을 할 수 있었다. 나아가 심리음향학 및 신호처리기술의 발달과 꾸준한 음질연구결과로 소리특성을 객관적으로 나타내는 소리의 시각화가 가능하였으며, 운전자가 인식하는 주관평가와의 상관관계를 높여 차량의 대표적인 음질인자로 정량화하여 음질목표를 설정할 수 있었다. 실내소음의 구성은 엔진 투과음, 흡배기 소음, 바람 소음, 도로 기인 소음 등으로 다양하므로 소음원에 따라 음의 균형을 맞추어 조화로운 음질개발을 하는 것이 중요했다. 또한 차량 판매되는 지역에 따라 선호음이 상이하여 지역별 실내음질의 차별화가 필요했다. 궁극적으로는 운전자의 감성품질을 만족할 수 있도록 음을 제어하여 브랜드 사운드를 개발하고 있다. 이러한 실내음질을 달성하기 위한 방법으로 소음원과 전달경로에 대해 기여도를 분석하고, 경로를 구성하는 시스템 별로 세분화하여 시스템 목표를 설정하였다. 시스템 개발에 중요한 인자로 차량의 동강성 및 흡차음 성능을 들 수 있다. 특히 디젤차량의 비중이 큰 유럽업체의 차량의 동강성 및 흡차음 개발 능력은 높게 평가되고 있다. 이에 유럽의 부품전문회사가 가지고 있는 해석과 시험적인 개발 방법을 통하여 전달계 특성을 만족하기 위한 시스템의 동강성 및 흡차음 특성을 개발하고 있다. 차량음질 튜닝의 중요한 기법 중 하나로 흡배기 개발을 추진하고 있다. 친환경자동차인 하이브리드차량, 전기차량 및 연료전지차량의 경우 전기구동부품에서 발생하는 각종 이음 발생을 최소화 했다. 보행자를 보호하고 운전의 즐거움을 향상하기 위한 가상사운드 개발을 진행하고 있다. 회사 수익성 향상을 위한 원가절감 및 구조 경량화에 따른 음질악화와 연비 향상 및 배기가스 규제 강화로 고성능 고출력 엔진탑재에 따른 음질악화 요인을 극복해야 했다. 운전자의 청감은 차량의 운전성에 따라서도 크게 영향을 받게 되므로 엔진제어와 변속기제어를 통해 음질과 운전성이 조화를 이룰 수 있도록 개발하고 있다. 향후, 소음원에 따른 시스템 최적화 개발, 운전성과 음질 연계 개발과 친환경차량의 가상사운드 개발 등이 자동차 음질 개발의 중요한 이슈로 생각한다.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.3
• /
• pp.113-120
• /
• 2006

This paper is concerned with a equalization technique for Orthogonal Frequency Division Multiplexing (OFDM) systems based on a block type pilot arrangement over slow fading channels. The bit rates obtained in underwater channels are relatively modest compared to some other communication channels such as cellular phones or indoor wireless systems. Consequently. the Doppler effect is the important parameter in tracking a channel. In case of a coherent demodulation scheme, the residual mean phase errors due to Doppler frequency may be fatal for the performance of the system. The equalizer could not solely handle mean Doppler shift. To account for the common Doppler effect a phase error tracking loop is used with the frequency equalizer. so that the rotation errors are avoided. Furthermore. simulations show that we can reduce the computational load of the tracking loop with negligible effect on performance.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.2
• /
• pp.113-119
• /
• 2020

Motor noise is a major concern in order to improve perceptual feeling of car interior sound due to increased motor usage in passenger cars. The purpose of this study is to propose factors that can represent the acoustic performance of motor noise according to the change of load. To this end, at first, it is shown that power spectrum and total loudness are not fit for noise performance, and then, PN_B, partial loudness related to the brush friction component, and PN_R, partial loudness related to the torque ripple component are investigated as factors representing motor noise. The performance curve of motor noise using PN_B and PN_R is proposed to identify trends of motor noise according to the loads. The curve could be a guide for the noise control, the selection of motor, and the improvement of a system.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.494-501
• /
• 2013

The convolution code(CC) of code rate 1/2 as a forward error correction (FEC) in Quadrature Phase Shift Keying (QPSK) is applied to decrease bit error rate (BER) by background noise and multipath in shallow water acoustic channel. Ratio of transmitting signal bandwidth to channel coherence bandwidth is defined as frequency selectivity index. BER and bit energy-to-noise ratio gain of transmitted signal according to frequency selectivity index are evaluated. In the results of indoor water tank experiment, BER is well matched theoretical results at frequency selectivity index less than about 1.0. And bit energy-to-noise ratio gain is also matched theoretical value of 5 dB. BER is effectively decreased at frequency selective multipath channel with frequency selectivity index higher than 1.0. But bit energy-to-noise ratio greater than a certain size in terms of CC weaving is effective in reducing bit errors. In the results, the defined frequency selectivity index in this study could be applied to evaluate a performance of CC in multipath channel. Also it could effectively reduced BER in a low speed underwater acoustic communication system without an equalizer.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.04a
• /
• pp.421-426
• /
• 2008

In case of the large-scaled indoor gymnasium that has been constructed in the local area, there are many instances for the use as multipurpose space where the public performances are possible such as leisure activity, lecture, assembling activity, drama, concert and so on for the resident together with the purpose of sporting facility. In order for utilization to the maximum of the function of such indoor gymnasium, the acoustic capabilities concerned with Definition of both Voice and Music are simultaneously required. However, in case of the large-scaled athletic facility, since it was designed with high ceiling-height in view of its characteristics, it forms a Sound Focus and then the sound is concentrating to the specific part, and because the vibration of sound is too loud due to its broad volume, the acoustic defects such as many Echoes are arising. On such viewpoint, based on the drawing of the indoor gymnasium that is scheduled to be built at B County, Chonbuk Province, this Study has proposed such indoor gymnasium equipped with the optimized acoustic condition passing through Acoustic Simulation Phase. As the result of Acoustic Simulation, we could design the indoor gymnasium that equipped with really satisfying acoustic performance 'after' reformation compared with 'before' reformation, and it is considering that such material could be utilized as the fundamental material that brings a curtailment effect of the construction cost and also enables us to improve the acoustic performance, at the stage of planning and designing for the similar sporting facility in the future.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.268-272
• /
• 2007

As Music Room in Art School is mainly for exercise of musical instrument rather than any lecture or music appreciation, it should be designed and constructed in consideration with Acoustic Condition on the preferential basis. However, in case of Music Room in Art School that has been built already or latest newly constructed, since it was designed and constructed without any reflection of Acoustic Characteristics, it appeared as inadequate for them to enjoy music appreciation or performance activity. On such view point, this Study has examined the physical Acoustic Characteristics for the subjects on those Music Rooms of Art Middle School, Art High School, Art College built in Cheonbuk Province, and it is deemed that the material grasped in such way could be utilized as the valuable data enables to improve Acoustic Performance at the time when designing and construction or renovation for Music Room hereafter.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.8
• /
• pp.708-719
• /
• 2007

In case of indoor gymnastics training floor, in view of its characteristics, since it is simultaneously required the related smooth communication between the coach and the player, also the acoustic performance regarding to the clearness of music, besides the sport activity, the consideration about the acoustic character has entered the stage as an indispensable element. On such viewpoint, recently constructed dome-typed gymnastic training floor was optimized acoustic design with remodeling through acoustic simulation test. And acoustic satisfaction degree and reaction was attempted to investigate about the gymnastics training floor estimating value of human's psychological(sensual) degree using auralization that enables to experience the virtual sound field at the stage of design. As the result of investigation about the research on the space of object, it could be known that the valuation regarding to the acoustic performance of 'after-improvement' was distinctly more refined than that of 'before-improvement'. It is now considering that such result of the study can be utilized as the useful data which enables to improve the retrenchment effect of the construction cost as well as the acoustic capability, by means of the prediction control on the acoustic problem from the stage of design, for the occasion when the similar indoor sport gymnasium is planning to build for the near future.