• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.2
• /
• pp.170-175
• /
• 2016

In order to transmit baseband signals through frequency dividing devices, we studied the transfer function of the device in the term of the baseband signal distortion. From the analysis, it is shown that the magnitude of the envelope signal is related to the mixer gain and the insertion loss of the low pass filter whilst the phase is the additional function with the 1/2 of the phase delay. For the purpose of the verification of the study, we designed a dynamic frequency divider at 1,400 MHz. The operating frequency range of the device is closely related to the conversion gain of mixers and the amplitude of input signal, and becomes wide as the conversion gain of mixers increases. The designed frequency divider operates between 0.9 GHz and 3.2 GHz, for -14.5 dBm input power. The circuit shows 20 mW power dissipation at $V_{DD}=2.5V$, and the simulation result shows that an amplitude modulated signal at 1,400 MHz with the modulation index of 0.9 was successfully downconverted to 700 MHz.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.3
• /
• pp.216-222
• /
• 2015

A previous velocity measurement system for marine sediment had several problems such as the errors occurred when picking first arrival time and the inconvenient measurement procedure. In order to resolve these problems, we developed a new acoustic properties measurement system by using PXI (PCI eXtentions for Instrumentation) module based on LabVIEW. To verify the new system, we measured the velocity and attenuation of sediment using the new system in a parallel with the previous system under the same experimental environment. The result of measurement showed 1~2% margin of error for the velocity as well as similar attenuation values. We concluded that the new system can efficiently measure the acoustic properties of marine sediment. It also has an advantage to construct the database of acoustic data and raw signal.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1996.10a
• /
• pp.42-45
• /
• 1996

잔향시간이 긴 실내의 전달함수의 모델링에 있어서 , 일반적인 플 밴드 MA 모델에 기초한 적응 필터를 이용한 경우에는, 많은 필터 차수를 필요로 하고 적응 시간이 길어지는 문제점이 있다. 본 논문에서는 필터 차수를 감소시키고 수렴 특성을 향사시키기 위해서, 각 입출력 신호를 몇 개의 주파수 대역으로 나우어서 각각의 주파수 대역에 대새서 적응 처리 과정을 행하는 서브밴드 MA 모델을 이용한 적응디지털 필터 처리 방법을 제안한다. 컴퓨터 시뮬레이션 서브밴드MA 모델을 이용한 디지털 적응 필터 처리과정의 유효성을 나타냈었다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.2
• /
• pp.23-34
• /
• 2004

Video camera can be a useful tool to capture images for use in colorimeter. However the RGB signals generated by different video camera are not equal for the same scene. The video camera for use in colorimeter is characterized based on the CIE standard colorimetric observer. One method of deriving a colorimetric characterization matrix between camera RGB output signals and CIE XYZ tristimulus values is least squares polynomial modeling. However it needs tedious experiments to obtain camera transfer matrix under various white balance point for the same camera. In this paper, a new method to obtain camera transfer matrix under different white balance by using 3${\times}$3 camera transfer matrix under a certain white balance point is proposed. According to the proposed method camera transfer matrix under any other white balance could be obtained by using colorimetric coordinates of phosphor derived from 3${\times}$3 linear transfer matrix under the certain white balance point. In experimental results, it is demonstrated that proposed method allow 3${\times}$3 linear transfer matrix under any other white balance having a reasonable degree of accuracy compared with the transfer matrix obtained by experiments.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.2
• /
• pp.30-37
• /
• 1994

Since the morden targets are of high speed and getting quiet in both active and passive mode, the necessities of developing advanced SONAR system capable of performing target motion analysis (TMA) and target classification are evident. In order to develop such a system, the scattering mechanism of complex bodies needs to be, some extent, fully understood and modeled. In this paper, MOving Spread Target(MOST) signal simulation model is presented and discussed. The model is based on the highlight distribution method, and simulates pulse elongation of spread target, doppler effect due to kinematics of the target as well as SONAR platform, and distribution target strength of each highlight point (HL) with directivity. The model can be used in developing and evaluating advanced SONAR system through system simulation, and can also be used in the development of target state estimation algorithm.

• The Journal of the Acoustical Society of Korea
• /
• v.12 no.5
• /
• pp.38-46
• /
• 1993

스피커는 입력이 전기신호이고 출력이 소리인 전기 음향 장치로서, 고유의 전달함수를 갖는 하나의 시스템으로 생각할 수 있다. 일한 스피커 시스템의 전달함수는 여러 가지 원인으로 인해 주파수 영역에서 평탄한 특성을 가지지 못하며 선형위상의 조건을 만족시키기가 힘들다. 음색을 변화시키는 스피커의 전달함수를 선형이라고 가정할 때 스피커의 앞단에서 스피커의 선형 전달함수의 역에 해당하는 선형 필터를 추가함으로쏘, 음색의 왜곡은 보정할 수 있다. 본 연구에서는 이러한 스피커의 선형왜곡을 보상하기 위한 선형필터로서 FIR 필터를 사용하였으나, 2장에 제시되어 있는 기존의 알고리듬과는달리 귀의 청감특성을 이용하여 가청주파수 대역에 대해 몇 개의 대역으로 나눈 후, 각 대역마다 보상 할 주파수 해상도를 달리하는 새로운 알고리듬에 대해 기술하였다. 이러한 다해상도 선형왜곡 보상시스템은 각 대역마다 다른 해상도로 보상한다는점에서는 필터뱅크 보상 시스템과 유사하지만, 대역통과필터가 아닌 저역통과필터만을 이용하여 설계의 복잡서응ㄹ 줄였으며 각 대역마다 독립적으로 보상하는 필터뱅크 보상시스템과는 달리 1차 대역에서 보상하지 ath한 오차를 2차, 3차에서 보상하는 새로운 기법을 이용하였다. 본 알고리듬을 적용한 모의실험을 통하여 성능을 평가한 결과 가청음대역에서 ±6dB의 왜곡을 보인 스피커가 실효 tap수를 272로 했을 때 ±0.5dB의 리플을 보이는 양호한 결과를 얻었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1277-1281
• /
• 2005

FPGA has been widely used in communication system. In this paper, we made 10 layers PCB on protection of signal noise and data lose with FPGA. We analyzed about change of the data transmission speed and length according to input frequency. The length of transmission line from FPGA's output-pin to output-port on PCB board is 13cm and extended lengths for test are 30cm, 60cm and 10cm. We knew that data can be stably transmitted to 100Mbps at transmission line length of 30cm.

• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.180-183
• /
• 2005

광주파수에서 대역을 나누어주는 광필터를 이용하여, 기존의 2 코어를 이용한 단방향 광통신을 1 코어를 이용한 양방향 통신으로 전환하여 광선로 절감효과를 얻을 수 있다. 그러나 그런 양방향 통신에서 CWDM (coarse wavelength-division multiplexing) 광채널들에 대한 채널 감시가 요구된다. 정확한 정보전달을 위하여 광원의 특성을 모니터하고, 또한 보드의 신호 레벨에서 감시를 통하여 신호의 오전달을 감시한다. 본 발표논문에서는 광선로 절감에 따른 CWDM 광채널의 성능 개선을 위한 감시기술에 대하여 설명하고, 망교체시에 다른 선로에 영향을 최소로 하는 적절한 감시기술을 설명한다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.23 no.1
• /
• pp.1-7
• /
• 2022

As a power transmission element, the timing belt is a toothed transmission belt that takes advantages of V-belts and gears. It has characteristics of non-slip and low noise. It is used as a power transmission device when transmitting power from a rotating shaft or linear motion in a mechanism. Rotation can be accurately transmitted through a belt pulley with grooves like a gear and a timing belt with grooves to precisely match with the belt pulley. In particular, in the mechanism in which the timing belt is used for the output shaft, the dynamic characteristics including the rigidity of the timing belt determine the transmission characteristics of the system, so its importance increases. In this paper, a stiffness reinforced belt that can be applied to a timing belt with a limited range of motion to increase its stiffness is proposed. To study the dynamic characteristics of the stiffness reinforced belt, the equation of motion for the stiffness reinforced belt was established, and a simulation model for the stiffness reinforced belt was created and analyzed. In order to confirm the analysis results of the motion equation and simulation model, a 1-axis rotation experimental equipment using a stiffness reinforcing belt was developed and the experiment was conducted. Through motion equations, simulation models, and experiment results, it was confirmed that the stiffness and dynamic characteristics of the timing belt could be improved by applying the proposed stiffness reinforcement belt.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.06a
• /
• pp.188-188
• /
• 2011

This paper describes the propagation characteristics of acoustic signals as a function of distance from the location of partial discharge(PD) occurrence to analyze correlation between discharge magnitude and acoustic signal in insulation oil. We fabricated a decoupler and an amplifier to measure acoustic signals produced by PD. The amplifier has the gain of 40 dB and the frequency bandwidth of 1.6 kHz~1.6 MHz. After a comparative calibration by a standard pulse generator and a coupling capacitor, we analyzed the propagation characteristics of acoustic signals in insulation oil as a function of distance.