• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.1
• /
• pp.39-45
• /
• 2009

OFDM is used for achieving a high-speed data transmission in mobile wireless communication systems. Conventionally, fast Fourier transform that is the main signal processing of OFDM is implemented using digital signal processing. The DSP FFT LSI requires large power consumption. Current-mode FFT LSI with analog signal processing is one of the best solutions for high speed and low power consumption. However, for the operation of current-mode FFT LSI that has the structure of parallel-input and parallel-output, current-mode serial-to-parallel and parallel-to-serial converter are indispensable. We propose a novel current-mode SPC and PSC and full chip simulation results agree with experimental data. The proposed current-mode SPC and PSC promise the wide application of the current-mode analog signal processing in the field of low power wireless communication LSI.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.855-858
• /
• 1998

본 연구에서는 MML(merged memory logic)구조를 갖는 스캔라인 컨버터를 설계하여 제안한다. 비월주사 방식인 TV 비디오 신호를 FIFO 메모리에 저장하여 순차주사방식인 VGA 비디오 시모호 변환하는 주사선 변환기를 MML 개념으로 설계하였다. MML 회로는 VHDL로 설계하여 V-system으로 시뮬레이션을 수행하고 altera FPGA에 구현한 후, TV 비디오 신호를 PC 모니터로 보기 위한 외장형 tV 수신 시스템에 적용하여 성능을 검증했다. MML 개념으로 설계된 컨버터는 system-on-a-chip 설계의 첫 단계로 메모리와 로직부분으로 구성된 일반적인 컨버터보다 효율적인 시스템 설계를 할 수 있다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2004.05a
• /
• pp.379-382
• /
• 2004

적응신호처리 분야에서 LMS알고리듬은 수식이 간단하고, 적은 계산량으로 인해 널리 사용되고 있지만, 시간영역의 적응알고리즘은 입력신호의 고유치 분포폭이 넓게 분포한 때는 수렴속도가 느려지는 단점이 있다. 이런 문제점을 개선하기 위하여 본 논문에서는 시간영역의 적응 알고리즘을 변환영역에서 수행하고, 변환영역에서 수렴성능 향상과 계산량을 줄이기 위하여 웨이블렛기반의 고속 적응 알고리즘을 제안하였다. 제안한 알고리즘을 OFDM 적응등화기에 적용하여, 기존의 OFDM 등화기 알고리즘과 비교하여 제안한 적응알고리즘의 성능이 우수함을 보인다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.07a
• /
• pp.161-162
• /
• 2019

본 논문에서는 변압기의 이상 신호 데이터를 원거리에서 축적하기 위한 이상 신호 진단 시스템을 제안한다. 이 시스템은 원격으로 변압기의 이상 신호를 수집하여 변압기의 이상을 알아낼 수 있다. 이 시스템은 상용된 통신 모듈의 느린 통신 속도를 고려하여 이상 신호를 RMS-DC 값으로 변환하는 작업을 추가하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.3
• /
• pp.165-169
• /
• 2008

Analog-to-Digital converters (ADCs) used in instrumentation and measurements often require high absolute accuracy, including excellent linearity and negligible dc offset. Incremental converters provide a solution for such measurement applications, as they retain most of the advantages of conventional ${\Delta}{\Sigma}$ converters, and yet they are capable of offset-free and accurate conversion. Most of the previous research on incremental converters was for single-channel and dc signal applications, where they can perform extremely accurate data conversion with more than 20-bit resolution. In this paper, a design technique for implementing multiplexed incremental data converters to convert narrow bandwidth ac signals is discussed. A design methodology to optimize the signal-to-quantization+thermal noise ratio of multiplexed IDC is presented. It incorporates the operation principle, topology, and digital decimation filter design. The theoretical results are verified by simulation results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.1 s.116
• /
• pp.15-23
• /
• 2007

A simple six-port direct conversion QPSK receiver which is made up of a six-port phase correlator, a signal power detector, and I/Q channel signal de-modulator is designed and implemented in this paper. The output phase signals of six-port phase correlator are also analysed. On the basis of $90^{\circ}C$ phase relation among the six-port phase correlator output signals, the QPSK de-modulation circuit is designed by a simple circuit. The six-port phase correlator is made up of $90^{\circ}$ hybrid branch line and power detector. The six-port phase correlator, which is designed in frequency range of 11.7 to 12.0 GHz, gets the phase error characteristics less than $5^{\circ}$. By considering matching network and amplitude balance in the designed fiequency range, the designed six-port direct conversion QPSK receiver demodulates the I and Q signals with performance less than $5^{\circ}$ phase error.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1071-1077
• /
• 2010

The six-port phase correlator using lumped elements was designed and fabricated in this paper, also the receiving performance of L-band direct conversion receiver using lumped six-port phase correlator element was analyzed. The proposed L-band lumped six-port phase correlator element was composed of a resistive power divider and the twist-wire coaxial cables. The proposed lumped six-port structure provides the small-sized configuration and wide-band characteristics. The performance of the L-band lumped direct conversion receiver structure was measured under the conditions of 1.69 GHz frequency for LO-CW signal and RF-QPSK signal, which are input signals for the lumped six-port phase correlator element. The direct conversion receiving structure using the proposed lumped six-port phase correlator element can recovered the good digital I/Q signal.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.33-38
• /
• 2008

The probability of an oscillation occurrence in M/W frequency conversion repeaters is low on account of the different operating frequency of the input and output signals. The probability of interference caused by the M/W frequency conversion repeaters to other systems is also low because the systems are used in the line-of-sight. Therefore M/W frequency conversion repeaters are generally used for retransmitting the signal received from base station to the islands. This paper describes the design and implementation of analog predistorter for M/W frequency conversion repeaters in mobile communications. The M/W repeaters convert IF frequency of 1010+/-10MHz to RF frequency of 11GHz. A predistorter can be designed for the M/W repeater operating in either IF or M/W frequency. In this paper IF predistorter operated in 1010MHz is designed and implemented because a M/W predistorter operated in 11GHz is difficult to implement. The IF predistorter can linearize RF modules in the repeater followed by IF stages. The performance test results show that the implemented analog predistorter improves ACPR of 10dB at the output power of 25dBm with the signal frequency of 10.805GHz.

• Journal of IKEEE
• /
• v.3 no.1 s.4
• /
• pp.69-78
• /
• 1999

In this paper, direct conversion receiver was designed to even harmonic anti-paralled diode pair ring mixer. Using a second harmonic component of LO instead of LO signal and RF signal are mixed by SHP(Sub Harmonic Pumped) mixer with anti-parallel diode pair. Canceling the harmonics of LO signal in ring mixer, SHP mixer using anti-parallel diode pair could mostly reduce the radiation of LO signal through a input port the most, good isolation characteristic, and low spurious characteristic by LO signal was shown over broad band. The produced SHP mixer showed LO/IF, RF/IF and LO/RF isolation was 24.6dB,36.2dB and 22.5dB respectively. And conversion loss was measured 15.6dB, IF output -35.6dBm with -20dBm RF input and 5.5dBm LO signal. 1dB compression point of If signal, in respect to RF signal, was found at the 0dbm RF signal.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.4B
• /
• pp.400-405
• /
• 2001

본 논문에서는 Local Oscillator(LO)의 누설신호 제거를 위해 혼합기의 특성을 이용하여 광대역의 특성을 가지고 RF 채널에 근접한 누설신호를 제거할수 있는 구조를 제안하였다. 제안된 구조는 Half-LO 주파수를 이용하는 방버븡로 LO 누설신호를 일반적인 다른 경우보다 RF 신호대역에서 멀리 떨어진 대역으로 분리시킴으로서 대역 통과여파기로서 쉽게 제거하였다. 상향변환기로서 필요한 저역통과여파기, 대역통과여파기, 그리고 증폭기를 설계하였고 혼합기에 의한 영상성분은 혼합기의 위상을 특성을 이용하여 제거하였다.