• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.18-21
• /
• 2008

Acoustic design parameters of a half-wave resonator are studied experimentally for acoustic stability in a model combustor. According to standard acoustic-test procedures, acoustic-pressure signals are measured. Quantitative acoustic properties of damping factor and sound absorption coefficient are evaluated and thereby, the acoustic damping capacity of the resonator is characterized. The diameter and the number of a half-wave resonator, its distribution are selected as design parameters for optimal tuning of the resonator. Acoustic damping capacity increases as the resonators with diameter increases. The optimum number of resonators or the optimum open-area ratio decreases as boundary absorption decreases.

• Geophysics and Geophysical Exploration
• /
• v.2 no.4
• /
• pp.202-208
• /
• 1999

We introduce a new acoustic parameter for the classification of seafloor sediments from chirp sonar acoustic profiling data. The acoustic parameter is defined as a derivative of the unwrapped phase of the Fourier transform of acoustic profiling data. Consequently, it represents the characteristics of attenuation by dissipative dispersion in sediments. And we estimated acoustic properties by geoacoustic modeling using Chirp data obtained from the different sedimentary facies. Our classification results, when compared with the results of analysis of sampled sediments, show that the acoustic parameter discriminates sedimentary facies and bottom hardness. Thus the method in this paper is expected to be an effective means of geoacoustic modeling of the seafloor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.5
• /
• pp.821-827
• /
• 2008

This paper presents the prediction model of attenuation characteristics of satellite communication signals operating in the range from 1 to 20GHz, associated with the effects of the Asian Dust. And this paper analyze the effects of the Asian Dust in theory that dust particles size and density, OPC, signal levels, exponentail distribution and the permittivity. The prediction model of the dust attenuation was got, combining the formula of the complex dielectric constant of Asian dust. Expressions for specific attenuation and attenuation are derived in terms of the height, visibility. Therefore it make an investigate to the prediction model of attenuation characteristics continuously.

• Proceedings of the KIEE Conference
• /
• 1981.07a
• /
• pp.161-164
• /
• 1981

본(本) 연구(硏究)에서는 $0.1MHZ{\sim}30MHZ$ 사이의 무선통신(無線通信) 전(全) 밴드에서 어느 특정(特定)한 주파수(周波數)의 신호(信號)만 약(約) 40 dB정도(程度) 감쇠(減衰)시키고, 이 신호(信號)의 주파수(周波數)를 제외(除外)한 나머지의 전대역(全帶域)에서 평원(平垣)하게 3dB정도(程度)만 감쇠(減衰)되는 제파기(除波器)를 Bridged T회로(回路)와 FET Buffer 회로(回路)를 조합(組合)하여 구성(構成)하여 실현(實現)하였다.

• Korean Journal of Optics and Photonics
• /
• v.10 no.3
• /
• pp.214-220
• /
• 1999

We calculated the deviation of decay time owing to intensity noise of ring-down signal and the sensitivity owing to shot noise, dark current, and bit resolution error of the data acquisition device. We verified the sources of systematic errors caused by the drift of cavity loss depending on bias voltage and the oscillation of decay time caused by interfering effect of mirrors.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.5
• /
• pp.5-13
• /
• 2001

It is well known that there are two experimental errors on acoustic decay measurements. ,One is due to the influence of the band pass filter the other one is that of an averaging device. In this paper the influence of the filter is investigated in detail. To minimize the influence of the filter, the product of the filter bandwidth B (3dB bandwidth) and the reverberation time T/sub 60/ of the room under test should be at least 16. Moreover, if the initial part of an acoustic decay curve is important, the strong requirement, i. e. BT/sub 60/〉64, must be satisfied. In this paper, the wavelet filter bank instead of the band pass filter bank is applied to obtain an acoustic decay curve. As a result, the influence of filter is reduced and then the value of BT/sub 60/ required for obtaining an acceptable decay curve becomes at least 4. The strong requirement for the initial part of a decay curve is also replaced by the BT/sub 60/〉16 instead of BT/sub 60/〉64.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.1
• /
• pp.39-55
• /
• 2022

This study carried out the laboratory tests for AE signal attenuation to determine the attenuation coefficient (α) of silo concrete in Gyeongju low and intermediate-level disposal environments. The concrete samples were prepared by satisfying the concrete mixing ratio used in the Gyeongju disposal silo, and these samples were additionally exposed depending on the temperature conditions and saturation and, dry condition. As a result of attenuation tests according to the transmission distance on three concrete specimens for each disposal condition, the AE amplitude and absolute energy measured on the saturated concrete were higher than that of the dry concrete in the initial range of the signal transmission distance, but the α of the saturated concrete was higher than that of the dry concrete. Regardless of the saturation and dry conditions, the α tended to decrease as the temperature increases. The α had a more major influence on the saturation and dry condition than the temperature condition, which means that the saturation and dry condition is the main consideration in measuring the signal attenuation of a concrete disposal structure. The α of concrete in the disposal environment expect to be used to predict the integrity of silos concrete in Gyeongju low and intermediate-level disposal environments by estimating the actual AE parameter values at the location of cracks and to determine the optimum location of sensors.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.4
• /
• pp.23-31
• /
• 1999

본 논문에서는 Ka 밴드 위성시스템에서 가장 큰 신호감쇠 요인으로 작용하는 강우효과를 분석하고 그 보상 방안으로서 계층형 8-PSK 변조방식을 제안하였다. 동기복조를 가정한 이론적인 BER 성능과 국내 강우 데이터에 근거한 예상되는 수신신호 품질을 분석하고 기존의 계층형 16-QAM 변조방식과 제안한 계층형 8-PSK 변조방식간의 성능을 비교하였다. 강우강도 및 강우감쇠는 대수정규 분포함수를 이용하여 추정하고 수신신호 품질은 서비스 중단 확률, 평균 수신 SNR에 대해 분석하였다. 결론적으로 제안한 계층형 8-PSK 변조방식은 기존의 계층형 16-QAM 변조방식과 비교해서 전반적으로 매우 우수한 성능을 가짐을 확인하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.3
• /
• pp.251-260
• /
• 2001

Damage Profess of CFRP laminates under monotonic tensile test was characterized by the correlation between Acoustic Emission(AE) and Ultrasonic Test(UT). The amplitude distribution of AE signal from a specimens is an aid to the determination of the extent of the different fracture mechanism such as matrix crack, debonding, fiber pullout and fiber fracture as load is increased. In addtion, the characteristics of ultrasonic amplitude attenuation are useful lot analysis of the different type of fracture mechanism. Different orientation of carbon fiber reinforced plastic specimens were used to investigate the AE amplitude range and ultrasonic amplitude attenuation. Finally, loading-unloading tests were carried out to check Felicity effect. During the tests, ultrasonic amplitude attenuation was investigated at the same time and compared with AE parameters. The result showed that two parameters of both AE and UT could be effectively used for analysis of fracture mechanism in CFRP laminates.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.6
• /
• pp.501-510
• /
• 2000

Recently, advanced signal analysis which is called "time-frequency analysis" has been used widely in nondestructive evaluation applications. Wavelet transform(WT) and Wigner Distribution are the most advanced techniques for processing signals with time-varying spectra. Wavelet analysis method is an attractive technique for evaluation of material characterization nondestructively. Wavelet transform is applied to the time-frequency analysis of ultrasonic echo waveform obtained by an ultrasonic pulse-echo technique. In this study, the feasibility of noise suppression of ultrasonic flaw signal and frequency-dependent ultrasonic group velocity and attenuation coefficient using wavelet analysis of ultrasonic echo waveform have been verified experimentally. The Gabor function is adopted the analyzing wavelet. The wavelet analysis shows that the variations of ultrasonic group velocity and attenuation coefficient due to the change of material characterization can be evaluated at each frequency. Furthermore, to assure the enhancement of detectability and naw sizing performance, both computer simulated results and experimental measurements using wavelet signal processing are used to demonstrate the effectiveness of the noise suppression of ultrasonic flaw signal obtained from austenitic stainless steel weld including EDM notch.