• Journal of Energy Engineering
• /
• v.25 no.1
• /
• pp.131-144
• /
• 2016

Damage occur frequently around the world on climate change and the main cause of greenhouse gas emissions regulation is growing. To this end, the government has built integrated management system for national building energy. The building energy information is total 6.8 million complex. Integrated management system for national building energy database are matched building registers information and energy information of the supply agencies. However, the matching process has its limitations so advanced work is in progress continuously. This study analyzed integrated management system for national building energy database quality and limitations and deduce improvement plan to increase system reliability and availability. The existing database matching average rate is 85.6%. 58.2% of the total non-matching data type has no building information. To ensure the ease of new database matching and the accuracy of the existing database matching, address standarization and building properties system are needed between building information and energy information. Also, The system construction is required to include information on other energy sources like petroleum energy which has high proportion of non-urban areas and small residential areas and renewable energy which has high potential in development and utilization.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.1
• /
• pp.1-8
• /
• 2015

Wind power systems have gained much attention due to the relatively high reliability, good infrastructures and cost competitiveness to the fossil fuels. Advances have been made to increase the power efficiency of wind turbines while less attention has been focused on structural integrity assessment of structural sub-systems such as towers and foundations. Among many parameters for integrity assessment, the most perceptive parameter may be the induced horizontal displacement at the hub height although it is very difficult to measure particularly in large-scale and high-rise wind turbine structures. This study proposes an indirect displacement estimation scheme based on the combined use of inclinometers and accelerometers for more convenient and cost-effective measurements. To this end, (1) the formulation for data fusion of inclination and acceleration responses was presented and (2) the proposed method was numerically validated on an NREL 5 MW wind turbine model. The numerical analysis was carried out to investigate the performance of the propose method according to the number of sensors, the resolution and the available sampling rate of the inclinometers to be used.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2491-2502
• /
• 2014

The main objective of this study is to find out the main fields and methods to create a low carbon green city. Through the findings, we hope to figure out the matters that must be focused on in order to realize a low carbon green city. In order to accomplish this, we organized the main fields and methods of fulfilling this accomplishment by taking a look at recorded documents and past studies related to the creation of low carbon green cities and related concepts. Then a FGI analysis was performed in order to examine suitability and deduct a planning technique. Also, through professional surveys and AHP analysis, we figured out the importance of planning techniques to understand the main characteristics of planning a low carbon green city. We also selected domestic and foreign cases, analysed the actual conditions of applying the deducted planning techniques, and compared the importance of planning techniques in order to see the difference between our plans and real results. 15 planning techniques were deducted and divided into 5 groups. The importance analysis and case analysis showed the following to be the main elements in planning the creation of a low carbon green city: compact high-density development, a traffic system revolving around pedestrians, active utilization of new and renewable energy, and establishment of a recycling system for waste.

• Journal of the Korea Convergence Society
• /
• v.8 no.8
• /
• pp.41-49
• /
• 2017

The 'NIST Framework and Road Map for Smart Grid Interoperability Standards' proposes an architecture framework to secure the direction of development and standard interoperability of smart grid and provides a list of identified standard, standard cyber security strategies, and certification framework. In particular, SEP 2.0 and OpenADR 2.0 are the examples. SEP 2.0 and OpenADR 2.0 can functionally link HEMS and Smart Grid, but interoperability standards between the two protocols are not planned in above document. The OpenADR Alliance also announced that work is underway to define mapping tables for interoperability between OpenADR 2.0 and SEP 2.0, but no information is yet available. Therefore, In this paper, in developing energy efficiency improvement HEMS, we propose a mapping model that supports syntactic and semantic founded interoperability between SEP 2.0 and OpenADR 2.0b for ICT grid convergence based on the standard specification document of each protocol and confirmed through an example of the semantic mapping function based on the demand response service scenario.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.4
• /
• pp.525-529
• /
• 2016

Biomass co-firing to existing thermal power plants is one of the most economical and efficient way to reduce $CO_2$ emission from the plant. There are several methods of co-firing and it can be categorized into (1) Parallel co-firing, (2) Indirect co-firing, and (3) Direct co-firing. Parallel co-firing is the most expensive way to high-ratio co-firing because it requires biomass dedicated boiler. Direct co-firing is widely used because it does not need high capital cost compared with the other two methods. Regarding the direct co-firing, it can be classified into three methods- Method 1 does not need retrofit of the facilities because it uses existing coal mills for pulverizing biomass fuels. In this case high-ratio co-firing cannot be achieved because of poor grindability of biomass fuels. Method 2 needs biomass-dedicated mills and revision of fuel streams for the combustion system, and Method 3 needs additional retrofit of the boiler as well as biomass mills. It can achieve highest share of the biomass co-firing compared with other two methods. In Korea, many coal power plants have been adopting Method 1 for coping with RPS(Renewable portfolio standards). Higher co-firing ratio (> 5% thermal share) has not been considered in Korean power plants due to policy of limitation in biomass co-firing for securing REC(Renewable Energy Certificate). On the other hand, higher-share co-firing of biomass is widely used in Europe and US using biomass dedicated mills, following their policy to enhance utilization of renewable energy in those countries. Technical problems which can be caused by increasing share of the biomass in coal power plants are summarized and discussed in this report. $CO_2$ abatement will become more and more critical issues for coal power plants since Paris agreement(2015) and demand of higher share of biomass in the coal power plants will be rapidly increased in Korea as well. Torrefaction of the biomass can be one of the best options because torrefied biomass has higher heating value and grindability than other biomass fuels. Perspective of the biomass torrefaction for co-firing is discussed, and economic feasibility of biomass torrefaction will be crucial for implementation of this technology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.672-682
• /
• 2020

The Korea Nowadays, which is research on digital twin technology for efficient operation in various industrial/manufacturing sites, is being actively conducted, and gradual depletion of fossil fuels and environmental pollution issues require new renewable/eco-friendly power generation methods, such as wave power plants. In wave power generation, however, which generates electricity from the energy of waves, it is very important to understand and predict the amount of power generation and operational efficiency factors, such as breakdown, because these are closely related by wave energy with high variability. Therefore, it is necessary to derive a meaningful correlation between highly volatile data, such as wave height data and sensor data in an oscillating water column (OWC) chamber. Secondly, the methodological study, which can predict the desired information, should be conducted by learning the prediction situation with the extracted data based on the derived correlation. This study designed a workflow-based training model using a machine learning framework to predict the pressure of the OWC. In addition, the validity of the pressure prediction analysis was verified through a verification and evaluation dataset using an IoT sensor data to enable smart operation and maintenance with the digital twin of the wave generation system.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.4
• /
• pp.239-247
• /
• 2013

Recently renewable energy such as offshore wind energy takes a higher interest due to the depletion of fossil fuel and the environmental pollution. This paper deals with multi-body dynamics (MBD) analysis technique for offshore wind turbine system considering aerodynamic loads and Thevenin equation used for determination of electric generator torque. Dynamic responses of 5MW offshore wind turbine system are evaluated via the MBD analysis, and the system is the horizontal axis wind turbine (HAWT) which generates electricity from the three blades horizontally installed at upwind direction. The aerodynamic loads acting on the blades are computed by AeroDyn code, which is capable of accommodating a generalized dynamic wake using blade element momentum (BEM) theory. In order that the characteristics of dynamic loads and torques on the main joint parts of offshore wind turbine system are simulated similarly such an actual system, flexible body modeling including the actual structural properties are applied for both blade and tower in the multi-body dynamics model.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.5
• /
• pp.463-472
• /
• 2015

Solar radiation data are important data that can be used as basic research data in diverse areas. In particular, solar radiation data are essential for diverse studies that have been recently conducted in South Korea including those for new and renewable energy resource map making and crop yield forecasting. So purpose of this study is modification of Heliosat-II method to estimate solar irradiance in Korea by using COMS-MI imagery. For this purpose, in this study, errors appearing in ground albedo images were corrected through linear transformation. And method of producing background albedo map which is used in Heliosat-II method is modified to get more finely tuned one. Through the study, ground albedo correction could be successfully performed and background albedo maps could be successfully derived. Lastly, In this study, solar irradiance was estimated by using modified Heliostat-II method. And it was compared with actually measured values to verify the accuracy of the methods. Accuracy of estimated solar irradiance was 30.8% RMSE(%). And this accuracy level means that solar irradiance was estimated on 10% higher level than previous Heliosat-II method.

• The Journal of the Korean life insurance medical association
• /
• v.25
• /
• pp.49-62
• /
• 2006

생명공학의 시대로 일컬어 지고 있는 오늘날, 재생의학 분야에서는 난치성 질환 치료를 목적으로 활발한 연구가 진행되고 있다. 특히, 줄기세포를 이용한 세포 대체치료 관련 연구는 최근 국내 황우석 박사의 체세포 핵이식 배아세포주 확립에 이르기 까지 괄목할 만한 발전을 보여 주고 있다. 이와 관련해 생명보험산업에 적잖은 파장이 예상되며, 생명보험사 내부적으로 기존에 판매된 상품의 사차손 관리와 함께 급속도로 발전하는 줄기세포 연구에 직접적으로 대응하는 상품개발, 언더라이팅, 지급 심사 등 보험사 내외에서의 전방위적인 변화가 필요하다는 문제 제기가 있다. 줄기세포란 조직 분화 과정에서 볼 수 있는 세포이며 근육 뼈 뇌 피부 등 신체의 어떤 기관으로도 전환할 수 있는 만능세포로서, 간 폐 심장 등 구체적 장기를 형성하기 이전에 분화를 멈출 배아 단계의 세포를 말한다. 한편, 성체줄기세포는 조직이나 기관의 분화된 세포들 사이에서 발견되는 미분화 세포로써, 자기 스스로 증식할 수 있으며, 조직이나 기관의 특수한 기능을 가지고 있는 세포로 분화할 수 있는 능력을 가진 신체줄기세포를 말한다. 배아줄기세포와 생체줄기세포를 통한 장기이식 등 난치병 정복은 윤리적, 사회적으로 많은 논란이 예상되며, 기술적으로도 해결해야 할 문제점들이 산적해 있기 때문에 아직은 요원한 것이 사실이다. 현재 유럽 대부분의 나라와 미국에서는 인간 배아의 복제가 금지되어 있으며, 일본 정부는 연구용 배아 복제를 제한적으로 허용하고 있다. 하지만, 우리 나라의 경우 2005년 1월에 '생명윤리 및 안전에 관한 법'이 발효되었지만 정부는 관련 부작용에 대한 깊은 고찰 없이 전폭적인 지원들 약속하고 있는 실정이다. 줄기세포 연구의 발달로 인해 인류가 난치병 치료의 첫 장을 열었다고 하더라도 그 영향이 당장 보험사에 미친다고 할 수는 없다. 왜냐하면 앞으로 이러한 신기술이 실제 의료행위에 적용되기 위해서는 여러 단계의 안정화 작업과 임상시험이 필요한데 이러한 작업이 기술적으로 어렵고 그 시간도 만만치 않게 걸리기 때문이다. 또한, 보험사의 보장은 크게 사망/수술/입원/암/기타보장으로 구별할 수 있는데, 줄기세포 연구의 발달과 관련이 있는 보장이 제한되어 있어 보험사에 미치는 영향이 당장 우려할 만한 수준이라 할 수 없다. 하지만 만약 치료용 줄기세포 배양으로 인한 장기 기관의 이식이나 손상세포의 대체 등과 같은 의학신기술의 예상 외로 급격하게 발전한다면 보험사의 Risk 관리에 상당한 저해요인으로 작용할 것으로 판단된다. 특히 진단 입원 수술로 대표되는 생존보장에 대한 사차 Risk 및 사차손의 급증이나 역선택 증가는 보험사의 경영수지 악화를 유발하여 보험산업 전반에 위험으로 작용할 수도 있다. 따라서, 장기적인 안목으로 업계 공동의 대응이 필요하고, 각 사에서도 상품개발, 언더라이팅, 지급심사 간의 긴밀한 협조가 요구된다. 생명보험산업의 Risk 관리는 기존의 시장환경에 영향을 받는 비차, 이차중심에서 보험회사가 어느 정도 관리를 통해 적정규모를 유지할 수 있는 사차로 그 중심축이 이동하고 있다. 보험산업이 계속 활력을 갖고 성장하기 위해서는 체계적인 Risk나 관리가 핵심일 것이며, 보험사의 사차 Risk의 중요성이 더욱 커져 가고 있는 현실에서 거시적으로 의학신기술 발달 등 위험요인에 대해 미리 분석하고 이에 대한 대비책 마련이 필요할 것으로 판단된다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.6
• /
• pp.52-59
• /
• 2010

As electric power demand of customers is constantly increasing, more bulk power systems are needed to install in a network. By development of renewable energies and high-efficient facilities and deregulated electricity market, moreover, the amount of distributed resource is considerably increasing in distribution network consequently. Also, distribution network has become more and more complex as mesh network to improve the distribution system reliability and increase the flexibility and agility of network operation. These changes make fault current increase. Therefore, the fault current will exceed a circuit breaker capacity. In order to solve this problem, replacing breaker, changing operation mode of system and rectifying transformer parameters can be taken into account. The SFCL(Superconducting Fault Current Limiter) is one of the most promising power apparatus. This paper proposes a methodology for on optimal location of SFCL. This place is defined as considering the decrement of fault current by component type and the increment of reliability by customer type according to an location of SFCL in a distribution network connected with DG(Distributed Generation). With case studies on method of determining optimal location for SFCL applied to a radial network and a mesh network respectively, we proved that the proposed method is feasible.