• Nuclear Engineering and Technology
• /
• v.27 no.3
• /
• pp.317-326
• /
• 1995

The oater level control system of the steam generator in a pressurized water reactor and its control Problems are analysed. In this work a stable control strategy Particularly during low Power operation based on the fuzzy control method is studied. The control strategy employs substitutional information using the bypass valve opening instead of incorrectly measured signal at the low How rate as the fuzzy variable of the flow rate during low power operation, and includes the flexible scale adjusting method for fast response at a large transient. A self-tuning algorithm based on the control performance and the descent method is also suggested for tuning the membership function scale. It gives a practical way to tune the controller under real operation. Simulation was carried out on the Compact Nuclear Simulator set up at Korea Atomic Energy Research Institute and its result showed the good performance of the controller and effectiveness of its tuning.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.419-424
• /
• 2021

This study investigated the possibility of early determination of frost damage on the concrete surface by using the rebound hardness method, widely used for estimation the compressive strength of concrete on the site. For this purpose, the surface damage of concrete was compared by measuring the rebound hardness and the relative dynamic modulus of the concrete for the multi-sided and single sided concrete surface exposed to freeze and thaw condition. Compared to the resonance vibration method, the rebound hardness method was able to show the frost damage 150 cycles quicker for the single-sided exposed concrete specimen and 50 cycles quicker for the multi-sided exposed concrete specimen. Therefore, it is considered that the rebound hardness method can determine the concrete surface damage more quickly than that of the resonance vibration method.

• Korean Journal of Food Science and Technology
• /
• v.26 no.5
• /
• pp.579-584
• /
• 1994

Near infrared reflectance(NIR) spectroscopy was used to determine the degree of retrogradation of cooked rice. Cooked rice samples were stored at $4^{\circ}C$ for 120 hours, and the degree of retrogradation was measured at every 6 hour during the storage time. Stored cooked rices were freeze-dried, milled and passed through a 100 mesh sieve. Enzymatic method using glucoamylase was used as reference method for the determination of the degree of retrogradation. Spectral differences due to retrogradation of cooked rice were observed at 1434, 1700, 1928, 2100, 2284 and 2320 nm. 32 samples of which moisture content were below 5% were used for calibration set, and 16 samples were used for validation set. High correlations were achieved between degree of retrogradation determined by conventional enzymatic method and by NIR with multiple correlation coefficient of 0.9753, and a standard error of calibration(SEC) of 3.64%. Comparable results were obtained with 3.91% of standard error of prediction(SEP), when the calibration equation was applied to independent group of samples of which moisture contents were in the range of calibration set. But when the calibration equation was applied to samples of which moisture contents were outer range of calibration set, SEP and bias were increased and correlation coefficient was decreased. The determination of degree of retrogradation was affected by sample moisture content. To determine degree of retrogradation of cooked rice by NIR using this calibration equation, it was suggested that sample moisture content should be controlled to below 5%.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.2
• /
• pp.37-45
• /
• 2022

A simplified model using the lifetime distribution has been presented to estimate the Mean Residual Life (MRL) of rubble-mound breakwaters, which is not like a stochastic process model based on time-dependent history data to the cumulative damage progress of rubble-mound breakwaters. The parameters involved in the lifetime distribution can be easily estimated by using the upper and lower limits of lifetime and their likelihood that made a judgement by several experts taking account of the initial design lifetime, the past sequences of loads, and others. The simplified model presented in this paper has been applied to the rubble-mound breakwater with TTP armor layer. Wiener Process (WP)-based stochastic model also has been applied together with Monte-Carlo Simulation (MCS) technique to the breakwater of the same condition having time-dependent cumulative damage to TTP armor layer. From the comparison of lifetime distribution obtained from each models including Mean Time To Failure (MTTF), it has found that the lifetime distributions of rubble-mound breakwater can be very satisfactorily fitted by log-normal distribution for all types of cumulative damage progresses, such as exponential, linear, and logarithmic deterioration which are feasible in the real situations. Finally, the MRL of rubble-mound breakwaters estimated by the simplified model presented in this paper have been compared with those by WP stochastic process. It can be shown that results of the presented simplified model have been identical with those of WP stochastic process until any ages in the range of MTT F regardless of the deterioration types. However, a little of differences have been seen at the ages in the neighborhood of MTTF, specially, for the linear and logarithmic deterioration of cumulative damages. For the accurate estimation of MRL of harbor structures, it may be desirable that the stochastic processes should be used to consider properly time-dependent uncertainties of damage deterioration. Nevertheless, the simplified model presented in this paper can be useful in the building of the MRL-based preventive maintenance planning for several kinds of harbor structures, because of which is not needed time-dependent history data about the damage deterioration of structures as mentioned above.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1274-1278
• /
• 2010

우리나라는 국토의 60% 이상이 산지로 구성되어 있다. 현재 국내에서는 홍수유출 해석 시 집중형 모형을 주로 이용하고 있다. 집중형 모형은 대개 유역 최하류 지점의 유출구를 기준으로 홍수유출 해석 모형의 매개변수 추정 및 검증이 이루어지며, 유역의 매개변수를 소유역별로 동일하게 가정하여 입력 자료를 구성한다. 따라서 산지하천 유역의 홍수유출 해석 및 예측 시 경사가 급하고 고도가 높으며 집중시간이 빠른 산지하천의 지형적 요소 및 특징을 적절히 고려하지 못하여 정확한 예측 및 해석을 하는데 어려움이 발생한다. 분포형 모형은 하나의 유출구가 아닌 임의의 지점에서 홍수유출 해석이 가능하며, 강우자료 입력 시 유역 평균강우가 아닌 분포형 강우, 즉 역거리자승법, 크리깅 기법 등을 사용하여 분포형 강우로 변환한 지점강우와 레이더 강우를 사용하여 보다 정확한 홍수유출 해석이 가능하다. 그리고 분포형 모형은 입력하는 모든 매개변수를 지형 자료에서 추출하여 사용하기 때문에 인공적인 해석을 배제할 수 있어 인위적인 오차를 줄일 수 있다. 본 연구에서는 평창강 상류유역을 시험유역으로 선정하여 연구를 수행하였으며, 분포형 모형의 하나인 $Vflo^{TM}$를 사용하여 홍수유출해석을 수행하였다. 지형자료만을 사용하여 특정 지점이 아닌 유역 내 임의 지점의 홍수유출량과 집중시간, 홍수위를 산정할 수 있어 산지하천에서 돌발적으로 발생하는 홍수를 신속하게 예측할 수 있었다. 또한 임의의 지점에서의 설계홍수량을 손쉽게 산정하여 수공구조물 설계 시 이용할 수 있으므로 홍수에 의한 인적 물적 피해를 최소할 할 수 있을 것으로 기대된다.

• Korean Journal of Food Science and Technology
• /
• v.24 no.4
• /
• pp.393-395
• /
• 1992

The ${\alpha}-lactalbumin({\alpha}-la)$ concentration in raw and laboratory-heated milks by HPLC was 1.20 mg/ml (unheated), 1.17 mg/ml ($63^{\circ}C$, 30min), 1.13 mg/ml ($72^{\circ}C$, 15sec) and 0 mg/ml ($100^{\circ}C$, 10min), respectively. Whereas, ${\alpha}-lactalbumin$ concentration ranges of commercial milks were $1.00{\sim}1.02\;mg/ml$ (pasteurized), $0.23{\sim}0.68\;mg/ml$ (UHT-pasteurized) and $0.77{\sim}0.89\;mg/ml$ (UHT-sterilized), respectively. It was supposed that the ${\alpha}-lactalbumin$ content of sterilized milk will be lower than that of UHT milk, but the opposite occurred. This discrepancy would be caused by the different heating system in the milk plants, where indirect UHT-treatment had more heat intensity than direct UHT-processing. The HPLC determination of ${\alpha}-lactalbumin$ may be an indicator to evaluate correctly and rapidly heated milks.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.3
• /
• pp.354-361
• /
• 1996

Near Infrared Reflectance Spectroscopy(NIRS) is accepted as today's most versatile method for rapid chemical analysis. The technique offers rapid multicomponent analysis. This study was conducted to improve the efficiency of quality analysis in covered barley grain, and to search for the effects of chemical components variation in covered barley grain on NIRS. Among the three groups with different range in the contents, each equation for starch contents increased standard error of prediction(SEP) and increased correlation coefficient from 0.872 to 0.883. According as, $\beta$-glucan and protein contents decreased SEP and increased correlation coefficient by expanded chemical components variation. Effective equation for ash contents analysis was obtained from group 3. Among the covered barley chemical components, starch and ash contents were required to conduct futher studies in term of accuracy and variation of contents. It was concluded that NIRS method would be applicable for the rapid determination of $\beta$-glucan and protein contents in covered barley grains.

• Journal of Korea Water Resources Association
• /
• v.40 no.1 s.174
• /
• pp.11-24
• /
• 2007

There exist various difficulties in runoff analysis due to many ungauged basins in Korea and the runoff phenomena is also more and more complicated by the change of geologic characteristics due to the urbanization. So, we use GIS technique which is widely used in hydrologic field and cell runoff concept for the fast and effective runoff simulation. This study uses the observations of 6 stage stations in Wi-Cheon watershed and simulates the watershed parameters by using WMS model. We construct DEM by the grids which are consisted based on the criteria of minimum area according to land use. The cell runoff is estimated by an average weighted method using mean annual streamflow and mean maximum daily streamflow obtained from six stage stations. The runoff ratio at arbitrary site is estimated by conducting the direction analysis of streamflow and by removing sinkhole. We compare the simulated and observed runoffs and know that the simulated runoff shows the valid results. So, we could use the geographical information and cell runoff concept for more fast and effective runoff simulation studies.

• Sleep Medicine and Psychophysiology
• /
• v.6 no.1
• /
• pp.52-60
• /
• 1999

Objectives: With the object of finding the appropriate conditions and algorithms for dimensional analysis of human EEG, we calculated correlation dimensions in the various condition of sampling rate and data aquisition time and improved the computation algorithm by taking advantage of bit operation instead of log operation. Methods: EEG signals from 13 scalp lead of a man were digitized with A-D converter under the condition of 12 bit resolution and 1000 Hertz of sampling rate during 32 seconds. From the original data, we made 15 time series data which have different sampling rate of 62.5, 125, 250, 500, 1000 hertz and data acqusition time of 10, 20, 30 second, respectively. New algorithm to shorten the calculation time using bit operation and the Least Trimmed Squares(LTS) estimator to get the optimal slope was applied to these data. Results: The values of the correlation dimension showed the increasing pattern as the data acquisition time becomes longer. The data with sampling rate of 62.5 Hz showed the highest value of correlation dimension regardless of sampling time but the correlation dimension at other sampling rates revealed similar values. The computation with bit operation instead of log operation had a statistically significant effect of shortening of calculation time and LTS method estimated more stably the slope of correlation dimension than the Least Squares estimator. Conclusion: The bit operation and LTS methods were successfully utilized to time-saving and efficient calculation of correlation dimension. In addition, time series of 20-sec length with sampling rate of 125 Hz was adequate to estimate the dimensional complexity of human EEG.

• KSBB Journal
• /
• v.25 no.2
• /
• pp.142-154
• /
• 2010

The protein-bound innerpolysaccharides (IPS) produced by suspended mycelial cultures of Inonotus obliquus have promising potentials as an effective antidiabetic as well as an immunostimulating agents. To enhance IPS production, intensive strain improvement process should be carried out using large amount of UV-mutated protoplasts. During the whole strain-screening process, the stage of solid growth-culture was found to be the most time-requiring step, thus preventing rapid screening of high-yielding producers. In order to reduce the cell growth period in the solid growth-stage, therefore, solid growth-medium was optimized using the statistical methods such as (i) Plackett-Burman and fractional factorial designs (FFD) for selecting positive medium components, and (ii) steepest ascent (SAM) and response surface (RSM) methods for determining optimum concentrations of the selected components. By adopting the medium composition recommended by the SAM experiment, significantly higher growth rate was obtained in the solid growth-cultures, as represented by about 41% larger diameter of the cell growth circle and higher mycelial density. Sequential optimization process performed using the RSM experiments finally recommended the medium composition as follows: glucose 25.61g/L, brown rice 12.53 g/L, soytone peptone 12.53 g/L, $MgSO_4$ 5.53 g/L, and agar 20 g/L. It should be noted that this composition was almost similar to the medium combinations determined by the SAM experiment, demonstrating that the SAM was very helpful in finding out the final optimum concentrations. Through the use of this optimized medium, the period for the solid growth-culture could be successfully reduced to about 8 days from the previous 15~20 days, thus enabling large and mass screening of high producers in a relatively short period.