• Aerospace Engineering and Technology
• /
• v.13 no.2
• /
• pp.167-176
• /
• 2014

The pyrovalves are widely used in aerospace industry for the opening and closing of flow channel due to the light-weight, high reliability and zero-leakage. In the United States, the loss of some spacecrafts using hydrazine as the propellent were proven by the blowby. Blowby is defined as the leakage of pyrovalve ignition combustion gas to the flow channel. Since then, the interference fit was applied for the sealing of piston to prevent the blowby. In this study, literature survey on pyrovalve technology is summarized mainly for AIAA papers. Common problems, improvement method, and performance comparisons of pyrovalves are also presented.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2006.05a
• /
• pp.20-25
• /
• 2006

차량 내에서 보내는 시간이 많은 현대인들에게 도로 내 여러 가지 상황 정보를 제공해 줄 수 있는 텔레매틱스 서비스가 점점 각광을 받고 있다. 도로 내 설치되어 있는 차량 검지기와 GPS(Global Positioning System) 기술을 통해 고수준의 교통 정보가 수집되고 있지만, 이를 가공하여 도로상의 운전자들에게 전달하는 방법은 최근 들어 활발하게 연구 중에 있다. 텔레매틱스 서비스 중 가장 중요한 서비스는 운전자가 요청하는 교통 상황 정보를 신속하고 정확하게 전달해 주는 것이다. 본 연구에서는 가까운 과거의 패턴 자료를 이용하여 필터링 범위를 산정한 후, 정상적인 흐름에 반하는 이상 자료들을 실시간으로 제거하여 신뢰성 있는 링크대표속도 값을 제공하는 방법을 제시한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07b
• /
• pp.334-336
• /
• 2005

본 논문은 정형 명세 언어인 Esterel이 가지는 취약점을 보안하기 위해 Safety-Critical Aided Development Environment를 추가로 활용하여 신뢰성 있고 안전적인 임베디드 제어 소프트웨어 개발을 위한 기법을 제시하고 있다. 그 뿐만 아니라 제시한 기법을 이용하여 개발된 간단한 자동 강속 제어 소프트웨어를 인터페이스와 기능 부분에 대해서 각각 확인 및 검증을 수행한 후 임베디드 시스템인 레고 마인드 스톰으로 제작된 차량 로봇에 탑재한 후 실험을 하고, 실험을 통해 기존 개발 기법과의 차이점을 분석한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.5
• /
• pp.586-592
• /
• 2004

In this study, the failure analysis of a decanter is carried out and the methods of performance improvement are presented. The decanter is a centrifugal separator that is used to separate water and solids from municipal and industrial sludge. Therefore, the decanter should be designed to improve the dewatering of sludge. Besides high performance, the decanter should guarantee its life time under a severe using condition. For theses reasons, the failure analysis and performance improvement of the decanter are studied. It is found from this study that the failure is caused by mass unbalance, wear, clogging or crack. If these failure causes are prevented, the life time as well as the performance is expected to be improved.

• Journal of KIISE
• /
• v.44 no.6
• /
• pp.559-565
• /
• 2017

A UAV(unmanned aerial vehicle) requires higher reliability for external effects such as electromagnetic interference because a UAV is operated by pre-designed programs that are not under human control. The design of a small UAV with a complete resistance against the external effects, however, is difficult because of its weight and size limitation. In this circumstance, a conventional small UAV dropped to the ground when an external effect caused the rebooting of the flight-control computer(FCC); therefore, this paper presents a novel algorithm for the improvement of the flight safety of a small UAV. The proposed algorithm consists of three steps. The first step comprises the calibration of the navigation equipment and validation of the calibrated data. The second step is the storage of the calibration data from the UAV take-off. The third step is the restoration of the calibration data when the UAV is in flight and FCC has been rebooted. The experiment results show that the flight-control system can be safely operated upon the rebooting of the FCC.

• Journal of Sensor Science and Technology
• /
• v.8 no.4
• /
• pp.341-346
• /
• 1999

In general cases, compared with glass electrode, FET type electrolyte sensors have many advantages. But the drift, memory effect and the poor reproducibility of the FET type electrolyte sensor cause the decrease of the reliability in the measurement system. To improve the reliability, an ion-measuring system using FET type electrolyte sensor array with 8 sensors has been developed. Developed system employed the electronic switchs to connect a signal detecting circuit with 8 sensor array and the system can measure ion concentration of 4 different type electrolyte($H^+$, $Na^+$, $K^+$, $Ca^{2+}$). The signal processing algorithm with insertion sorting method was adopted to enhance the reliability. We measured 3 different ion($H^+$, $Na^+$, $K^+$) to evaluate the performance of developed system. The results show that the designed signal processing algorithm can reduce the error range in comparison with a simple arithmetic mean and the developed system has a good reliability over the previous single channel sensor system.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.9
• /
• pp.1-10
• /
• 2011

Unfortunately, in current microprocessors, increasing the frequency causes increased power consumption and reduced reliability whereas it improves the performance. To overcome the power and thermal problems in the singlecore processors, multicore processors has been widely used. For 2D multicore processors, interconnection is regarded as one of the major constraints in performance and power efficiency. To reduce the performance degradation and the power consumption in 2D multicore processors, 3D integrated design technique has been studied by many researchers. Compared to 2D multicore processors, 3D multicore processors get the benefits of performance improvement and reduced power consumption by reducing the wire length significantly. However, 3D multicore processors have serious thermal problems due to high power density, resulting in reliability degradation. Detailed thermal analysis for multicore processors can be useful in designing thermal-aware processors. In this paper, we analyze the impact of workload distribution, distance to the heat sink, and number of stacked dies on the processor temperature. We also analyze the effects of the temperature on overall system performance. Especially, this paper presents the guideline for thermal-aware multicore processor design by analyzing the thermal problems in 2D multicore processors and 3D multicore processors.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.586-589
• /
• 2013

In this paper, the proposed scheme is STBC system combined with convolutional code to ensure the reliability of data transmission for a high rate wireless communication. In addition, this scheme uses a modified viterbi algorithm in order to get a high system gain when data is transmitted. Because we combine STBC and comvolutional code, the proposed scheme can get a diversity gain of STBC and coding gain of convolutional code at the same time. Unlike existing viterbi docoding algorithm using Hamming distance in order to calculate branch matrix, the modified viterbi algorithm uses Euclidean distance value between received symbol and reference symbol. To analyze the system proposed, it was simulated by changing the constraint length of the convolutional code and the number of transmit and receive antennas of STBC.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.2
• /
• pp.87-96
• /
• 2017

Objectives: Improvement of the reliability of work environment measurement results is one of the principal subjects to be resolved in the field of industrial hygiene. Thus, this study was conducted in order to review domestic programs for enhancing the reliability of work environment measurement results and propose a more efficient management plan for workplace monitoring. Materials and Methods: The current domestic programs reviewed in this study are the quality control system and evaluation system for industrial hygiene laboratories, the reliability system accompanied by KOSHA (the Korea Occupational Safety and Health Agency), the system of permissible exposure limits and observed inspection system for permissible exposure limits. Their contents and data were analyzed by reviewing articles, reports, and guidelines related to reliability improvement for work environment measurement results. Results: As a result of the literature review, all the domestic programs investigated in this study had both merits and demerits in terms of considering the reliability of work environment measurement results. In particular, the fact that preliminary notification is provided to the head of a workplace before implementation would be an obstacle for elevating the reliability of work environment measurement results. Conclusions: Based on the review results obtained from this study, it is proposed that on-site measurement without preliminary notification should be considered for a more efficient inspection system that would enhance the reliability of workplace monitoring.

• Journal of Digital Convergence
• /
• v.11 no.12
• /
• pp.319-326
• /
• 2013

There are many software reliability models that are based on the times of occurrences of errors in the debugging of software. Software error detection techniques known in advance, but influencing factors for considering the errors found automatically and learning factors, by prior experience, to find precisely the error factor setting up the testing manager are presented comparing the problem. It is shown that it is possible to do asymptotic likelihood inference for software reliability models based on infinite failure model and non-homogeneous Poisson Processes (NHPP). Statistical process control (SPC) can monitor the forecasting of software failure and thereby contribute significantly to the improvement of software reliability. Control charts are widely used for software process control in the software industry. In this paper, we proposed a control mechanism based on NHPP using mean value function of logarithmic hazard learning effects property.