• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.5
• /
• pp.168-177
• /
• 2008

The code propagation is one of the most important technic for software update in wireless sensor networks. This paper presents a new scheme for code propagation using network coding. The proposed code propagation method roughly shows 20$\sim$25% performance improvement according to network environments in terms of the number of data exchange compared with the previously proposed pipelining scheme. As a result, we can efficiently perform the software update from the viewpoint of speed, energy, and network congestion when the proposed code propagation system is applied. In addition, the proposed system solves the overhearing problems of network coding such as the loss of original messages and decoding error using the predefined message. Therefore, our system allows a software update system to exchange reliable data in wireless sensor networks.

• Journal of KIISE:Information Networking
• /
• v.29 no.3
• /
• pp.242-252
• /
• 2002

When a Mobile IP handoff occurs, the packets in flight can be lost because they are tunneled based on out-of-date location information. In this parer, we propose an enhanced handoff protocol that achieves no packet loss during Mobile IP handoff over a wireless LAN. Our handoff protocol predicts the next foreign agent that a mobile host is to visit by using: the information from the data link layer of wireless LAN. After that, when a Mobile IP handoff occult, the current foreign agent forwards the packets destined to a mobile host to the predicted foreign agent which buffers them. This eliminates packet loss and reduces the packet forwarding delay. Our handoff protocol is simulated using the Network Simulator-2 (ns-2) and shows the substantial performance enhancement of TCP with much less overhead up to 6.2 times compared to standard Mobile IP.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3218-3226
• /
• 2009

A number of on-demand routing protocols for sensor networks have been proposed yet. However, the majority of proposed on-demand routing protocols for sensor networks are not suitable for a relatively poor wireless environment and sensor applications requiring reliable data transmission due to using a hop-count metric for their protocols. In this paper, we proposed a minimum LQI(Link Quality Indicator) based on-demand sensor network routing protocol that is suitable for a relatively poor wireless environment and implemented the proposed routing protocol on a TinyOS. We also compared the implemented protocol with typical hop count based routing protocol by carrying out performance experiments on a multi-hop testbed. The results from these experiments showed that the successful transmission rate of the proposed routing protocol is higher than that of typical hop count based routing protocol over a poor wireless link.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.2
• /
• pp.284-289
• /
• 2008

H.264/AVC among moving picture compression standard is the standard format for high compression rate and reliable video transimission. It generates blocking effects in video due to compressing video using block-based DCT and includes de-blocking filter to reduce blocking effect. Therefore, the filter makes the video over-smoothing and the quality of it is reduced. In this paper, we propose a improved de-blocking filter to solve the demerit. The proposed de-blocking filter redetermine the block boundary strength and apply the comer filtering to eliminate artifacts in low frequency domain. To evaluate the performance, we apply the proposed deblocking filter and exiting method to various video and evaluated the quality of image subjectively and objectively by analyzing the result. The simulation result shows the proposed method preserves the edge of video, reduces blocking effects and improves PSNR than the existing method.

• Journal of the Korea Society for Simulation
• /
• v.20 no.1
• /
• pp.19-28
• /
• 2011

The safety applications based on the IEEE 802.11p, periodically transmit the safety-related information to all surrounding vehicles with high reliability and a strict timeline. However, due to the high vehicle mobility, dynamic network topology and limited network resource, the fixed beacon scheduling scheme excess delay and packet loss due to the channel contention and network congestion. With this motivation, we propose a novel beacon scheduling algorithm referred to as spatial-aware(SA) beacon scheduling based on the spatial context information, dynamically rescheduling the beaconing rate like a TDMA channel access scheme. The proposed SA beacon scheduling algorithm was evaluated using different highway traffic scenarios with both a realistic channel model and 802.11p model in our simulation. The simulation results showed that the performance of our proposed algorithm was better than the fixed scheduling in terms of throughput, channel access delay, and channel load. Also, our proposed algorithm is satisfy the requirements of vehicular safety application.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.6
• /
• pp.34-40
• /
• 2011

From the present paper researched about the Design of Image Rejection SSB Modulator for X-Band Monopulse RADAR using Waveguide Hybrid Coupler. Generally, SSB modulator mixes IF(RF) and LO signals, and then it converts to RF(IF) frequency band. In this case, in order to transmit one sideband from RF band, SSB modulator is demanded the removal of image and LO signal. The balanced mixer was designed using waveguide hybrid coupler and crystal mixer diode to mix LO and IF signal. And also the IF Amplifier was designed for IF(+) and IF(-) signal generation which have $90^{\circ}$ phase differences which are suitable in two crystal mixer diode inputs. In order to maintain a high electric reliability from high frequency band the waveguide and IF amplifier's case were manufactured with aluminum using deep brazing techniques. The test result of SSB modulator, LO and sideband signal rejection ratio were 14.2dB and 18.5dB respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4C
• /
• pp.338-346
• /
• 2012

Wireless sensor network (WSN) technology provides a variety of medical and healthcare solutions to assist detection and communication of body conditions. However, data reliability inside WSN might be influenced to healthcare routing protocol due to limited hardware resources of computer, storage, and communication bandwidth. For this reason, we have conducted various wireless communication experiments between nodes using parameters such as RF strength, battery status, and deployment status to get a optimal performance of mobile healthcare routing protocol. This experiment may also extend the life time of the nodes. Performance analysis is done to obtain some important parameters in terms of distance and reception rate between the nodes. Our experiment results show optimal distance between nodes according to battery status and RF strength, or deployment status and RF strength. The packet reception rate according to deployment status and RF strength of nodes was also checked. Based on this performance evaluation, the optimized sensor node battery and deployment in the developed our mobile healthcare routing protocol were proposed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5C
• /
• pp.295-301
• /
• 2011

In [1], it has been shown that the energy spreading transform (EST) based iterative equalizer (IE) could enhance its performance by improving the reliability of the decision feedback symbols without the help of the complicated channel decoder. In the matched filter (MF) based IE proposed in [1], however, its feedforward filter (FFF) has been designed in the frequency domain while its feedback filter (FBF) in the time domain. So its complexity increases proportional to the channel memory length. To solve this problem, in this paper, both FFF and FBF are designed in the frequency domain. This enables the proposed frequency domain IE (FD-IE) to achieve the lower complexity over the conventional method in the highly dispersive channel. In addition, simulation results demonstrate that the BER performance of the proposed method is the same as the conventional.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4B
• /
• pp.227-235
• /
• 2012

Holes that generated by the unpredictable and harsh nature application environment or uneven energy consumption are an inevitable phenomenon in wireless sensor networks. Most of the existing schemes for this hole problem tend to use a static detour path to bypass a hole. The static detour path may lead to uneven energy consumption of the nodes on the boundary of the hole, thus it may enlarge the region of holes. At the same time, traffic would concentrate on the nodes on the boundary of the hole and tend to be depleted quickly. To solve this problem, we introduce energy-efficient grid-based geographic routing and hole-detouring scheme by taking advantage of grid anchor point in wireless sensor network with holes. The location of hole detour anchor node is dynamically shifted in grid cell. just generating dynamic hole detour paths to reduce total energy consumption. Simulation results are provided to validate the claims.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.12
• /
• pp.137-148
• /
• 2012

In this paper, we proposed the location-aware coordinate routing algorithm for improving the performance of routing algorithm by using ZigBee in Smart Grid environment. A distributed address allocation scheme used an existing algorithm that has wasted in address space. The x, y and z coordinate axes from divided address space of 16 bit to solve this problems. However, coordinate routing does not take account of wireless link condition. If wiress link condition is not considered, when the routing table is updated, the nodes with bad link conditions are updated in the routing table and can be chosen as the next hop. This brings out the retransmissions because of received packet's errors. Also, because of these retransmissions, additional power is consumed. In this paper, we propose the location-aware coordinate routing algorithm considering wiress link condition, where reliable data transmission is made and the consumed enegy is minimize. and we compared and connected region and transition region of ZigBee location based routing in the aspect of average number of multi hops, subordinate packet delivery ratio, delay time, and energy consumption of proposed algorithm. It turned out that there were improvements in performances of each items.