• Convergence Security Journal
• /
• v.12 no.6
• /
• pp.85-92
• /
• 2012

There are many software reliability models that are based on the times of occurrences of errors in the debugging of software. It is shown that it is possible to do asymptotic likelihood inference for software reliability models based on infinite failure model and non-homogeneous Poisson Processes (NHPP). For someone making a decision about when to market software, the conditional failure rate is an important variables. The finite failure model are used in a wide variety of practical situations. Their use in characterization problems, detection of outliers, linear estimation, study of system reliability, life-testing, survival analysis, data compression and many other fields can be seen from the many study. Statistical Process Control (SPC) can monitor the forecasting of software failure and there by contribute significantly to the improvement of software reliability. Control charts are widely used for software process control in the software industry. In this paper, we proposed a control mechanism based on NHPP using mean value function of log Poission, log-linear and Parto distribution.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.411-414
• /
• 2016

K-water institute is a calibration and test institute accredited by international standard calibration center for water-level meters. Due to the absence of on-site calibration system and procedure for Float Water Level Meter, the calibration was performed only in the standard calibration laboratory. In this study, mobile calibration system and procedure were developed to calibrate Float Water Level Meter on site using scale bar and camera. It is possible to obtain reliable water-level data and achieve consistent data management.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.8
• /
• pp.13-18
• /
• 2016

In Internet of Things (IoT) environment, a variety of smart devices are connected to Internet through various network technologies such as 4G/5G, WiBro, Bluetooth, etc. in order to provide the remote monitoring service such as smart healthcare service, etc. Most standard mobility management protocols based on IETF Mobile IP may not be suitable for Internet of Things (IoT) environments due to constrained power, constrained CPU processing and memory capacity, and large signalling overhead which are inherently accompanied by various devices in IoT environments. In this article, we propose a new mobility management protocol CoMP (CoAP-based Mobility Managemenbt Protocol) for reliable mobility management in IoT environments. The architecture and algorithm to achieve both reliability and simplicity for IoT mobility management are proposed. Finally, performance has been evaluated by both mathematical analysis and simulation.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.572-575
• /
• 2011

본 연구는 프랜차이즈 본사의 성과에 직접적인 영향을 미치는 가맹점 순응에 대해 관계교환이론 관점에서 살핀 본사와의 갈등과 본사에 대한 신뢰의 영향관계를 실증 고찰한 연구이다. 연구결과는 본사에 대한 신뢰가 갈등과 순응을 완전매개 함을 보여줌으로써 가맹점 관리를 위한 프랜차이즈 본사의 신뢰 구축 필요성에 힘을 실어주고 있다. 이는 문서상 계약에 미처 명기하지 못한 공백에 대한 관계적 지배를 가능케 할 뿐만 아니라 이해의 불일치와 불공정한 힘의 관계로 인한 갈등을 관리하여 상호 호혜적 관계를 가능케 한다는 점에서 대단히 중요하다. 이와 같은 갈등관리로 인한 신뢰의 구축 그리고 가맹점 순응으로 이어지는 관계의 메커니즘을 이론적 논의와 실증분석을 통해 국내 처음으로 규명했다는 점에서 본 연구는 이론적 실무적 공헌이 크다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2023.11a
• /
• pp.173-174
• /
• 2023

본 연구는 공중보건 비상사태 발생 시 시민들의 위기의식과 신뢰 간의 관계를 살펴보았다. 위기의 영향은 개인, 사회, 국가에 따라 다르다. 정부의 위기관리는 특히 '공공성'이라는 측면에서 비정부기구와 매우 다른 것이 국민의 책임의식을 해소하기 위한 관료제를 수반하기 때문이다. 전염병 확산 단계에서 사람들은 부정적인 감정에 쉽게 빠지게 되며, 중대사고 발생 후 대중의 부정적인 감정을 줄이는 것은 중대사고로 인한 조직의 피해를 효과적으로 줄일 수 있다. 코로나19 팬데믹 상황에서 시민들의 위기의식이 신뢰에 미치는 영향을 기반으로 공중보건 위기상황의 관리를 최적화하고 시민들의 정신건강을 증진 시킬 수 있는 방안에 대한 지침을 제공해야 한다고 판단 된다.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.230-236
• /
• 2007

The quality control of composite structure includes inspection, testing and monitoring in all processes from receiving inspection to part fabrication. The purpose of these activities is to ensure that the design objectives are consistently achieved. The quality factors include material, receiving inspection, storage and shelf-life control, environmental control, testing, inspection and record control. This paper presents the process verification method using destructive test and quality control method in composite structure of aircraft. And it is believed that the destructive test will be basis to obtain a reliability of non-destructive test in complex composite structure and to ensure the design requirements in composite part.

• Journal of Korean Society of Archives and Records Management
• /
• v.12 no.1
• /
• pp.189-207
• /
• 2012

It is necessary to diagnose the standard record management system when the system is being spread out to entire public organization and institutions. This study aims to analyze the standard record management system for improving system and revising the related standards in the future. This study evaluates the satisfaction on the interface and functional quality of the system through questionnaire survey on records managers. It is found that the satisfaction of functional quality is just above the line, but the interface fails to satisfy records managers. Also the reliability of the system appears to be higher satisfaction than efficiency and usability. Therefore, the study suggests that the standard records management systems should try to improve 'easy of use' and effectiveness and efficiency by implementing heavy batch job and promoting modulation of key function. And the study emphasizes that the standards will be revised with the long-term plan in order to develop standard records management system systematically and continuously.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.548-560
• /
• 2018

This study was conducted to evaluate the effects of SCM on PM's capabilities and sustainable benefit sharing in leading global companies. To achieve this, statistical analyses were carried out through an empirical questionnaire survey of 426 PMs in SCM companies. The results showed that SCM commitment, vision and goal sharing have positive effects on PM's capabilities in leading global companies, boosting PM capability. Moreover, sustainable benefit sharing was improved along with SCM trust building, vision and goal sharing in global leading companies, supporting the usefulness of these variables. In contrast, SCM information sharing and trust building did not lead to significant acceleration of PM's capabilities, rejecting these variables. These findings indicate that SCM information sharing or trust building does not really help simple members to accelerate PM's capabilities.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2001.05a
• /
• pp.92-95
• /
• 2001

제조업체에서의 재고관리 시스템은 그 적용 목적과 상황에 따라 다양한 형태가 있다. 그러나, 완제품 생산에 필요한 원자재 및 부품의 안정된 공급을 위하여 수요 예측과 경제성, 신뢰성, 운용성이 우수한 시스템 기술이 요구되고 있다. 본 논문에서는 효율적인 재고관리를 위하여 신경망을 이용한 지능적인 예측 재고관리 시스템을 설계하고, 신경망의 학습알고리즘을 적용하여 제품생산에 요구되는 자재들의 재고를 예측하고 효율적으로 관리할 수 있는 방법을 제안한다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.11-20
• /
• 2014

For Web-based applications in IoT environment, IETF CoRE WG has standardizing the CoAP. One of limitations of CoAP is that CoAP standard does not consider the mobility management of the CoAP sensor node. In this paper, we propose the mobility management protocol of CoAP sensor node by considering the characteristics of the constrained network. The proposed mobility management protocol supports for Web client to be transmitted the sensing data from CoAP node reliably while the CoAP sensor moves into different wireless networks. To do this, we designed the architecture with the separate IP address management of CoAP sensor node and presented the mobility management protocol, which includes the holding and binding mode, in order to provide the reliable transmission. Finally, the numerical analysis and simulation with NS2 tool have been done for the performance evaluation in terms of the handover latency and packet loss with comparing the proposed mobility management protocol with other the existing mobility management protocols. The performance result shows that the proposed mobility management can provide the transmission of sensing data without the packet loss comparing with the existing mobility management protocol reliably.