• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.1
• /
• pp.22-30
• /
• 2001

This paper describes a neural network based fuzzy PID control scheme. The PID controller is being widely used in industrial applications. However, it is difficult to determine the appropriated PID gains in nonlinear systems and systems with long time delay and so on. In this paper, we re-analyzed the fuzzy controller as conventional PID controller structure, and proposed a neural network based self tuning fuzzy PID controller of which output gains were adjusted automatically. The tuning parameters of the proposed controller were determined on the basis of the conventional PID controller parameters tuning methods. Then they were adjusted by using proposed neural network learning algorithm. Proposed controller was simple in structure and computational burden was small so that on-line adaptation was easy to apply to. The experiment on the magnetic levitation system, which is known to be heavily nonlinear, showed the proposed controller's excellent performance.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.768-770
• /
• 1996

This paper propose neural network which is one of self-organizing techniques. It is composed neural network controller as input signal is error and change of error which is optimal output, and is learned system by using a error back-propagation learning algorithm is one of error mimizing learning methods. In order to achieve practical real time control reduce on learning time, it is applied to load-frequency control of nonlinear power system with using a moment learning method. It is described in such a case considering constraints for a rate of increace generation-rate.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.51-53
• /
• 1993

This paper proposes a design of the tracking controller using artificial neural network and the compare the result with a result of optimal controller. In practical use, conventional Optimal controller has some limits. First, optimal controller can be designed only for linear system. Second, for many systems state observation is difficult or sometimes impossible. But the controller using artificial neural network does not need mathmatical model of the system including state observation, so it can be used for both linear and nonlinear system with no additional cost for nonlinearity. Designed multi layer neural network controller is composed of two parts, feedforward controller gives a steady state input & feedback controller gives transient input via minimizing the quadratic cost function. From the comparison of the results of the simulation of linear & nonlinear plant, the plant controlled by using neural network controller shows the trajectory similar to that of the plant controlled by an optimal controller.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.46-47
• /
• 2007

전력시스템안정기는 전력시스템의 저주파 댐핑을 효율적으로 향상시키기 위해 사용되는 제어기이다. 전력시스템안정기의 동적 특성은 위상 보상기의 이득과 시정수와 같은 선형 파라미터와 출력 리미터와 같이 비평활, 비선형 특성을 나타내는 비선형 파라미터에 영향을 받는다. 기존의 선형 제어 방법인 고유치 분석을 통한 선형 파라미터의 최적화 방법은 소신호 동작 범위에 대한 최적화 기법이기 때문에 큰 상정사고 시 효과적인 댐핑 향상을 보장할 수 없게 된다. 이를 극복하기 위하여 하이브리드 시스템에 신경회로망을 임베디드화하여 체계적인 방법으로 비선형 파라미터를 최적화한 후, 고유치 분석을 통해 선형 파라미터를 최적화함으로 전력시스템안정기의 성능 향상을 도모할 수 있다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1999.10a
• /
• pp.363-369
• /
• 1999

In these days, there are a lot of studies in the port automation, for example, unmanned container trasporter, unmanned gantry crain, and automatic terminal operation systems and so on. In terms of loading and unloading equipments. we can consider container transporter. This paper describes the automatic control for the UCT(unmanned container transporter), especially steering control systems. UCT is now operated on ECT port in Netherland and tested on PSA ports in Singapore. So we present a design on the controller using neural network PID(NNPID) controller to control the steering system and we use the neural network self-tuner to tune the PID parameters. The computer simulations show that our proposed controller has better performances than those of the other.

• Journal of Power System Engineering
• /
• v.15 no.5
• /
• pp.83-90
• /
• 2011

In general, 20-high Sendzimir mills(ZRM) use small diameter work rolls to provide massive rolling force. Because of small diameter of work rolls, steel strip has a complex shape mixed with quarter, edge and center waves. Especially when the shape of the strip is controlled automatically, the actuator saturation occurs. These problems affect the productivity and quality of products. In this paper, the problems in automatic shape control of ZRM were analyzed. In order to evaluate the problems for the automatic shape control in ZRM, recognition performance was analyzed by comparing the measured shape and the recognized shape. The actuator positions by the shape recognition and the manual operation were compared. From the analysis results, the necessity of the improvement of recognition performance in ZRM is suggested.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.4
• /
• pp.457-466
• /
• 2005

In this paper, we propose a wavelet neural network(WNN) based predictive control method for path tracking of mobile robots with multi-input and multi-output. In our control method, we use a WNN as a state predictor which combines the capability of artificial neural networks in learning processes and the capability of wavelet decomposition. A WNN predictor is tuned to minimize errors between the WNN outputs and the states of mobile robot using the gradient descent rule. And control signals, linear velocity and angular velocity, are calculated to minimize the predefined cost function using errors between the reference states and the predicted states. Through a computer simulation for the tracking performance according to varied track, we demonstrate the efficiency and the feasibility of our predictive control system.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.11
• /
• pp.617-624
• /
• 2000

The negative weight can be ofter seen in Hopfield neural network, which is difficult to implement negative conductance in circuits. Usually, the inverted output of amplifier is used to avoid negative resistors for expressing the negative weights in hardware implementation. However, there is some difference between using negative resistor and the inverted output of amplifier for representing the negative weight. This difference is discussed in this paper.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.10
• /
• pp.65-77
• /
• 2004

In this paper, we propose an adaptive mechanism based on immune algorithm and neural network identifier technique. It is also applied fur an autonomous guided vehicle (AGV) system. When the immune algorithm is applied to the PID controller, there exists the case that the plant is damaged due to the abrupt change of PID parameters since the parameters are almost adjusted randomly. To solve this problem, we use the neural network identifier (NNI) technique fur modeling the plant and humoral immune algorithm (HIA) which performs the parameter tuning of the considered model, respectively. After the PID parameters are determined in this off-line manner, these gains are then applied to the plant for the on-line control using an immune adaptive algorithm. Moreover, even though the neural network model may not be accurate enough initially, the weighting parameters are adjusted to be accurate through the on-line fine tuning. Finally, the simulation and experimental result fur the control of steering and speed of AGV system illustrate the validity of the proposed control scheme. These results for the proposed method also show that it has better performance than other conventional controller design methods.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.6
• /
• pp.208-216
• /
• 1996

This paper presents a decentralized control scheme for interconnected systems with unmodeled nonlinearities and interactions using a neural coordinator. The interactions due to the interconnection and the unmodeled nonlinearity associated with each subsystem are represented by the deviations from linearized states of decomposed subsystems. the decentralized controller is composed of local controllers and a neural coordinator. The local controller for each subsystem is derived from linearized local system parameters y linear optimal control theory. the neural cooridnator generates a corrective control signal to cancel the effect of deviation sthrough the backpropagation learning with the rrors obtained form the difference of the local system outputs and reference model outputs. the reference model consists of the part of local system without deviations. The effectiveness of the proposed control scheme is demonstrated by simulation studies.