• Korean Journal of Plant Taxonomy
• /
• v.47 no.1
• /
• pp.51-93
• /
• 2017

Eastern coastal lagoons are a particular type of estuarine systems where seawater mixes with fresh water from their catchments. With the development of aquatic vegetation, this area shows high level of biodiversity. The purpose of this study is to produce a strategy for the comprehensive conservation of the vegetation of coastal lagoons through studies of the floristics and plant species compositions in 17 eastern coastal lagoons in Korea. Vascular plants were collected 109 times, from June of 2010 to November of 2014. The results showed that there were 720 taxa in total, including 118 families, 378 genera, 655 species, 13 subspecies, 46 varieties, and 6 hybrids. Korean endemic species numbered 11 taxa, and vascular plants listed in the red list according to the International Union for Conservation of Nature (IUCN) numbered 18 taxa. Indicator species of fourth (IV) and fifth (V) degree, as specified by floristic subregions, numbered 23 taxa. Among the species investigated in this survey, there were 4 taxa of plants of southern origin and 8 taxa of plants of northern originin the Korean peninsula. Several rare plants, Thermopsis lupinoides, Ligusticum hultenii, Mitrasacme alsinoides, Utricularia australis, Juncus fauriei, Carex vesicaria, and Puccinellia kurilensis, were distributed in eastern coastal lagoons. In all, 96 alien plants were recorded in the investigated area. The coastal lagoons on the eastern coast of Korea showed high plant diversity with many rare plants and phytogeographically important plants. Conservation strategies to ensure biodiversity and effective management of coastal lagoons are discussed in detail.

• Fire Science and Engineering
• /
• v.22 no.5
• /
• pp.79-82
• /
• 2008

Biodiesel is manufactured from vegetable oils, etc. in reaction with methanol so that the product of biodiesel may be dangerous due to the methanol remained of it. The risks of methanol remained in biodiesel were studied by measuring flash points and dynamic viscosity to some samples of biodiesel by adding methanol to a certain percentage of. The results of flash points of biodiesel are decreased in accordance with increasing of methanol in biodiesel and also decreasing the dynamic viscosity. It was shown that the risks of explosion of biodiesel are significantly high due to lower flash points resulted from methanol remained in biodiesel fuel as a reactant or adding to biodiesel for reduction of viscosity.

• Journal of the Korean Applied Science and Technology
• /
• v.4 no.1
• /
• pp.9-18
• /
• 1987

The effects of procedures for preparation of fatty acid methyl esters for gas chromatography were investigated. A quantitative comparison of four procedures for the preparation of the fatty acid methyl esters from Korean sesame seed lipids which can be representative of fatty acid ranges of Korean vegetable oils has been made. The procedures employed were $BF_3$-methanol, HCI-methanol, sodium methoxide-methanol, and tetramethylammonium hydroxide-methanol. Twelve fatty acids ranged from 14:0 to 24:0 were identified in the lipids from Korean white and black sesame seeds. All four procedures gave similar results for the fatty acids, 16:0, 18:0, 18:1, 18:2, and 18:3 present in the range of $1{\sim}44%$ but only in the HCI-methanol procedure, the fatty acids, 16:1, 20:0, 22:0, 24:0 present in the range of $0.02{\sim}1%$ showed the lowest values. When using tetramethylammonium hydroxide-methanol procedure for determination of total fatty acid composition from white and black sesame seed lipids, unsaponifiable matters including sesamol, sesamolin and sesamin present in the seed lipids are not removed from the resulting reaction mixture. Thus the transesterification mixture is used without further treatment for injection into the gas chromatography. However, the gas chromatographic analysis of the transesterification mixture showed that the unsaponifiable matters had no effect on the fatty acid composition of the seed lipids. From the results, it appears that the $BF_3$-methanol, sodium methoxide-methanol and tetramethylammonium hydroxide-methanol procedures can be used to prepare fatty acid methyl esters from Korean vegetable oils. Among the methods, the tetramethylammonium hydroxide-methanol procedure, which give total fatty acid composition, glyceride fatty acid composition and composition of free fatty acids present, appears to be a simple, convenient and quantitative procedure and applicable to samples containing broad ranges of fatty acids.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.78-89
• /
• 2021

Organic residues analysis is an analysis method that reveals the types of organic material samples by using the characteristic that main components constituting substances are different depending on the species of animals and plants. In this study, scientific analysis of the organic residues attached to wood coffins in the Joseon Dynasty Hoemyo excavated from the site of Singok-dong, Uijeongbu was used to identify the types of remnants and to use them as information to restore the uses of organic materials and the way they lived in the past. As a result of FT-IR analysis of the residue attached to the inside of the wood, it was estimated to be a natural plant resin material. In addition, as a result of analysis by GC-MS to confirm the characteristic factors of natural resins, diterpenoids (abietane) and pimaran (pimarane), such as dehydroabietic acid and pimaric acid (diterpenoid) compounds, and saturated and unsaturated fatty acid components were detected together. Diterpenoid compounds are components mainly found in Pinaceae resins. It is confirmed in the literature that rosin, a representative material of Pinaceae resin, was used as an adhesive material. Considering the situation where an organic material remained at the joint of the wood, the organic material attached to the wood is judged to be an adhesive material made of Pinaceae resin. In addition, the fatty acid component detected together is a component derived from plant oil, and it is presumed to be made by mixing rosin and oil as recorded in previous studies. This study confirms that organic residues remain in the burial environment without losing their characteristics. It is expected that scientific analysis of organic residues will be conducted in the future to accumulate information necessary for the interpretation of past living culture.

• Nuclear Engineering and Technology
• /
• v.13 no.4
• /
• pp.221-228
• /
• 1981

${\gamma}$-(U-$^{14}$ C)-BHC was applied to rice plants grown in a pot and its fate in the growth, polishing and oil-extraction processes of the grain was investigated. The $^{14}$ C-activity was absorbed and translocated widely in the plant and the recovery of applied $^{14}$ C-activity in the straw and grain was about 2.8%, of which 9.4% was found in the brown rice. The % partitioning of $^{14}$ C-residues in bran and polished rice was 12:88 and that in oil and oilcake was 37 : 63. Characterization of $^{14}$ C-residues indicated the presence of ${\gamma}$-BHC, pentachlorocyclohexene, trichlorobenzene and hydrophilic metabolites, whose proportions were different in the straw and grain.

• Korean Journal of Microbiology
• /
• v.35 no.4
• /
• pp.289-295
• /
• 1999

Halotolerant microalga Dunaliella bardawil was reported to massively accumulate the ${\beta}$-carotene, which protects cells from excess light intensity. Maximum specific growth rate of 0.168/hr was achieved when cells were cultivated at 1 N NaCl, pH 8.0, light intensity 80 ${\mu}E/m^{2}/s$, agitation 70rpm. For the effectiv accumulation of ${\beta}$-carotene, ozone ro hydrogen peroxide was added to media which was irradiated with white fuorescent lamps with moderate light intensity of 250 ${\mu}E/m^{2}/s$. As a result, maximum volumetric content of ${\beta}$-carotene was 324 ${\mu}$g/㎖. The ${\beta}$-carotene extraction efficiency of vegetable oils was in the order of olive oil, sesame oil, rice brain oil, corn oil, and soy bean oil. Sonication and warming was effective in ${\mu}$-carotene extraction and finally 96.9% of ${\beta}$ could be extracted using olive oil.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.106.2-106.2
• /
• 2010

동식물성 기름과 메탄올의 전이에스테르화 반응에 의해 생산되는 바이오디젤은 환경친화성과 지속가능성이 인정됨에 따라 그 생산량이 급격히 증가하고 있어 대두유, 유채유, 팜유 등의 원료유 부족과 가격 상승, 수급 불안정 등의 문제가 대두되고 있다. 이를 해결하기 위한 방안으로 유리지방산 함량이 높은 저가유지 자원(폐식용유, 폐돈지, 폐우지, soapstock, trapped grease)과 새로운 오일 작물을 이용한 생산 기술 연구가 활발히 진행되고 있다. 본 연구에서는 비활용 해외 열대작물 씨앗에서 착유한 식물성 오일을 정제하여 바이오디젤 원료유를 생산하는 과정에서 발생하는 폐기물(폐유, 폐수)의 경제적 처리 방안으로 유화유 제조 원료(벙커C유, 물)와 유화유 제조 첨가제(무기계, 유기계)로 활용 가능성을 검토하였다. 열대작물 오일의 물성 분석 결과 고형물, 수분, 인지질(phospholipid), 유리지방산(free fatty acid) 함량이 기존 원료유보다 매우 높게 나타났다. 인지질은 바이오디젤 제조 반응후 에스테르와 글리세린의 층분리를 방해하고 유리지방산은 염기촉매와 결합하여 지방산염을 생성해 생산 수율을 감소시킨다. 고형물과 수분 역시 촉매반응에 악영향을 가지나 여과와 감압증발에 의해 쉽게 제거가 가능하다. 유리지방산은 산촉매 에스테르화 반응에 의해 제거가 가능하다. 인지질은 탈검(degumming) 과정을 통해 제거하며 탈검은 수용성 탈검, 산 탈검, 세정 공정으로 구성된다. 착유한 원료유의 고형물을 제거 후 물과 수세하여 수용성 인지질을 수화하여 층 분리해 제거하고 상층의 오일은 추가적인 산 탈검을 수행한다. 그 뒤 세정을 통해 사용된 탈검제인 산과 추가적으로 수화된 인지질을 제거하게 된다. 이러한 3단계의 탈검 과정에서 하층으로 오일과 물이 폐기물로서 배출되며 본 연구에서는 배출 폐기물을 다시 층분리하여 오일층과 물 층으로 구분하여 유화유 제조에 사용되는 벙커C유, 물, 그리고 기존 유기계 및 무기계 유화제의 대체 가능성을 조사하였다. 유화 연료유는 기름과 물을 균일한 분산상으로 혼합한 연료유로 연소시 오일계 성분의 미연분을 감소시켜 연료 효율 제고와 배출가스 성상을 개선하기 위해 개발되어 왔다. 본 발표에서는 다양한 종류의 상용 첨가제 및 바이오디젤 원료유 생산 폐기물을 활용해 유화 연료유를 제조하였으며 각 유화유의 장시간의 상(phase) 안정성을 비교하였다. 바이오 폐기물 중에는 천연 계면활성제(surfactant)인 인지질이 다량 함유되어 있어 기존의 무기계 및 유기계 유화제보다 상 안정성이 우수하게 나타났으며 바이오디젤 원료유 생산 공정의 폐기물인 폐유과 폐수의 활용이 가능한 것으로 나타났다.

• Journal of Korean Society of Forest Science
• /
• v.107 no.1
• /
• pp.25-34
• /
• 2018

This study was performed to discover the comparison of the understory species composition and the growth velocity of the regeneration seedlings in Pinus densiflora forests being managed by the seed-tree method from 2008 year. The investigation site located in Bonghwa, Gyeongsangbuk-do province was established by eighteen quadrats such as six control ones, six slope ones and 6 concave ones, in which we carried out the vegetation survey and measured annual height growth of each seedlings. As a result of vegetation analysis, the understory vegetation of the seed-tree forest area was mainly composed of shrub plants such as Lespedeza bicolor, Zanthoxylum schinifolium, Securinega suffruticosa, Lespedeza maximowiczii and Stephanandra incisa, herb plants such as Miscanthus sinensis var. purpurascens, Carex humilis var. nana, Spodiopogon sibiricus and Artemisia keiskeana, and vine plants such as Pueraria lobata, Smilax sieboldii, Dioscorea batatas, Actinidia arguta, Vitis amurensis and Rubus crataegifolius. Especially, the vine plants were relatively more imported to the concave site than the control site and the slope site. As a result of measurement of growth velocity, the seedlings of the Pinus densiflora appeared to be 3,175 trees/ha for the non-suppressed trees and 7,842 trees/ha for the suppressed trees. In cases of the concave site, individuals of seedlings were much lower than those on the slope site, probably due to the competition effects of vine plants. Consideringly, silvicultural practices for clearing the vine plants should be inevitably accompanied. Also, the growth velocity of the suppressed and non-suppressed trees has been constantly increasing, those of the non-suppressed trees much higher than the suppressed trees. This represents that the seedlings grow rapidly after the suppressed period with competition to the surrounding plants. Therefore, specific practices such as blush control and vine clear should be carried out at the beginning stage of regeneration in the seed-tree stand.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.4
• /
• pp.359-369
• /
• 2011

The study was carried out to investigate the quality characteristics of pellets manufactured with adding soybean oil, waste soybean oil, ozonized soybean oil and ozonized waste soybean oil to Larix kaemferi Carr sawdust. The characteristics of pellet included moisture contents, heating value, ash contents, apparent densities, durabilities, absorption ratio and elementary analysis. Moisture contents were shown 7.66~9.48% which satisfied the first grade (less than 10%) of quality standard of wood pellets announced by Korea Forest Research Institute. The heating value of the manufactured wood pellets in this study exceeded the first grade of quality standard (more than 4,300 kcal/kg) and it appeared that the pellets manufactured with adding oils and ozonized oils had more heating value than the control pellets. Ash contents 0.34~0.42% also passed the first grade (less than 0.7%) of quality standard and apparent densities were adequate for the first grade (640 kg/$m^3$) on the quality standard. Durabilities of the pellets manufactured with adding soybean oil and ozonized waste soybean oil were shown over the first grade (97.5 kg/$m^3$) of quality standard. In the general results of durabilities, the pellets manufactured with additives had better values than the control pellets. After 24 hours absorption ratio experiment, absorption ratio of pellets manufactured with additives also appeared much lower moisture absorption than the control pellets and they still had the same results after 5days absorption ratio experiment. Elementary analysis of the sulfur content was satisfied the first grade (less than 0.05%) of quality standard of wood pellets and the nitrogen content was also adequate for the first grade (less than 0.3%) of quality standard of wood pellets.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.60.1-60.1
• /
• 2010

Chemically functionalized plant oils such as acrylated epoxidized soybean oil (AESO) and maleinized acrylated epoxidized soybean oil (MAESO) were used as new bio-based binders for $TiO_2$ electrodes of dye-sensitized solar cells (DSSC). More porous networks and larger porosities were fabricated on the $TiO_2$ films using plant oil binders due to the larger number of functionalities, in comparison with the film using polyethylene glycol (PEG). The charge-transfer resistance in the $TiO_2$ films was considerably shrunk due to the reduced impurity states. The short circuit photocurrent (Isc) and the open circuit photovoltage (Voc) of the cell using plant oil binders increased and the conversion efficiency improved significantly.