• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.8
• /
• pp.59-66
• /
• 2008

Korea Electric Power Research Institute in charge of the power IT project "Development of Prototype for Advanced Substation Automation System based on the Digital Control Technology" is performing system verification. Breaker Failure protection IED can operate protection activity by communicating with other IEDs such as T/L IED, owing to IEC 61850 international standard and digital substation automation system. Accordingly, IED testing process should be changed from the conventional way by electrical contact test on individual IED to system based testing method by network communication. This paper describes how to test BF IED based on substation automation system and testing procedures using UML, which is used to implement S/W design.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.845-847
• /
• 2004

단락시험시 시험회로의 주요 파라미터들은 시험전압과 시험전류를 이용하여 결정된다. 특히, 단락전류의 경우 전류파형의 피크치, RMS, 시간, DC-성분, 역률 등을 분석프로그램을 이용하여 분석하게 된다. 그러나 이러한 분석프로그램은 각 시험기관마다 다르고, 현재까지 분석프로그램을 검증할 국제저인 기준이 존재하지 않았다. 그러나 최근 들어 STL(Short-circuit Testing Liason)에서는 각 시험기관마다 상이한 분석프로그램을 검증할 절차에 대한 연구를 수행하여 왔으며 그 첫 번째로 단락전류 분석프로그램에 대한 성능 평가 절차가 어느 정도 완성되었다. 이에 본 논문에서는 STL에서 배포한 TDG(Test Data Generator)를 이용해reference curve를 생성하고, 전기연구원의 전류분석프로그램을 사용하여 분석프로그램의 신뢰성을 평가하여 보았다.

• The KIPS Transactions:PartA
• /
• v.16A no.2
• /
• pp.79-88
• /
• 2009

In boundary scan architecture, test stimuli are shifted in one at a time and applied to the on-chip system logic. The test results are captured into the BSR and are examined by subsequent shifting. In this paper, we developed a continuous capture test architecture and test procedure using TPG based on boundary scan is used to performance test. In this architecture, test patterns of TPG are applied to CUT with system clock rate, and response of CUT is continuously captured by CBSR(Continuous Capture Boundary Scan Register) at the same rate and the captured results is shifted to TDO at the same rate. The suggested a continuous capture test architecture and test procedure is simulated by Altera Max+Plus 10.0. The simulation results shows the accurate operation and effectiveness of the proposed test architecture and procedure.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.748-753
• /
• 2011

Generally, in the temperature and environment test of railway electronics, cold and heat resistant tests are involved. Relevant KRS standards describe "There is no problem" as acceptance criteria for function check during the temperature and environment tests. According to this requirement, testers perform some function and performance tests which are easy to perform during test procedure using temperature chamber. This paper reviews the limit of current check method for cold and heat resistant tests and proposes an alternative. An alternative is the application of data sheet. Using data sheet, the temperature of equipped components is checked whether this temperature meet acceptance criteria or not. Also, this paper suggests temperature test range guidelines comparing temperature standards for general IC component. For the example in real field, this method uses the lowest temperature and the highest temperature in major domestic cities.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.6
• /
• pp.597-604
• /
• 2019

In this paper, we propose an improved method on an adaptive application of the CPP(Chinese Postman Problem) algorithm to the protocol test suite generation for conformance testing. Also, we present an example application of this CPP algorithm to B-ISDN Q.2931 call/connection control procedure for the purpose of showing how it can be adapted to generate a test suite for conformance testing of a communication protocol. The proposed method has an advantage of an optimization technique which finds a minimum cost of test suite from a standardized specification, so this optimization technique of the CPP algorithm can be practically applied to a real environment for testing a conformity of a protocol implementation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.5
• /
• pp.563-568
• /
• 2010

Turbopump-gas generator open-loop coupled tests are performed during the development of a 30tonf-LOx/Kerosene rocket engine. In the turbopump-gas generator open-loop tests, the propellants to gas generator are supplied from the outlets of turbopump, while the gas exhausted from the gas generator is vented out to the atmosphere, instead of being used to turbine driving. This paper presents the objectives, procedure, and results of the open-loop coupled test, in addition to a schematic representation of the test apparatus and the operating conditions for the test facility system and control system. The results of turbopump-gas generator open-loop coupled test confirm chill-down procedure, startup characteristics, nominal operability and smooth shutdown of the open-loop coupled Test Plant in test conditions simulating engine system operation environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.3
• /
• pp.409-416
• /
• 1998

TMN(Telecommunication Management Network) provides underlying structure to transfer, store and processing management information which are necessary for Telecommunication network and service management. The application of TMN is widely applicable to Analogue telecommunication network Public and private network switching system, Transmission system, Telecommunication related software and logical telecommunication network resource management and others. This paper consider TMN as one System Under Test(SW), and propose a new TMN test architecture, besides existing simulation based test method, which is able to test, on the basis of standardized testing procedure and testing method, directly with test system. There are several fields in protocol testing and one of them is protocol conformance testing which is defined in ISO/IEC 9646 series and it has twin document as ITU X.290 series. To apply this standardized procedure on TMN testing it is prerequisite to devise a new TMN testing architecture and set up testing procedures according to the new architecture.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.97-106
• /
• 2020

The purpose of this study is to determine how to apply ISO/IEC/IEEE 29119 software test procedures and ISO/IEC 25023 software test evaluation items to software-accredited testing laboratories based on the ISO/IEC 17025 international standard requirements. As a method, the overall requirements for their application to a test laboratory were analyzed by mapping ISO/IEC/IEEE 29119 and ISO/IEC 25023 based on ISO/IEC 17025. According to the mapping analysis, a total of 29 documents were created, including quality manuals, procedures, and test guidelines for the operation of the test laboratory. As a result of the study, a test laboratory management system was developed using Confluence 6.15 software by applying the analyzed results of the overall requirements. The test procedures, documents, and records were stored in, and operated from, this system. Verification of suitability for operation of the test laboratory was conducted by KOLAS evaluators through a document review and an on-site audit at the LG Electronics SW Accredited Test Laboratory in Seoul. In conclusion, it was confirmed through the KOLAS evaluation that the test laboratory management system and the operation of the test laboratory are appropriate and, compared with previous cases, the test laboratory operates effectively, and the overall schedule of accreditation could be shortened.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.887-890
• /
• 2005

The earthquake test Procedures specified in three international codes were reviewed and compared for the network equipments. As technical level on the electronics and networking is growing in Korea, many related equipments are required to export to abroad. The network equipments are now essential tools for communication among individuals as well as societies, especially at the hazard situation such as earthquake strike. The Korean network companies are trying to improve the earthquake resistance performance for their products to expand domestic and international markets. In this paper it is reviewed that most codes related on the earthquake tests can be performed with the facilities provided in Korea for the network equipments. However new facility is required to prepare for more performance and higher regulating codes expected.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.3
• /
• pp.29-36
• /
• 2009

In this paper, a case of a high-rise building supported by a large-diameter drilled shaft socketed in a weathered ground has been studied. The design case of pile foundation presented in this paper could be a representative example of execution of pile design through three(3) design stages of "preliminary design-proof test-supplementary design". As proof test, two(2) BDH PLT (Bi-directional High Pressure Pile Load Test) were performed at the early construction stage. By following the design process of this way, the economic pile design could be carried out and a large amount of construction cost saving could be realized.