• Journal of the korean Society of Automotive Engineers
• /
• v.6 no.1
• /
• pp.27-35
• /
• 1984

측정치의 데이터를 그림으로 나타내면 "종을 거꾸로 엎어놓은 모양(Bell Shaped Curve)"의 정 규분포를 이루는 것은 잘 알려진 사실이다. 그러나 수명시험데이터의 경우는 분포의 형이 찌 그러지게 된다. 수명분포는 Weibull분포에 따르므로 Weibull분포에 의한 해석을 하여야 하는 것이 원칙이나 대수정규분포로 근사시켜서 해석을 하여도 실용상 큰 지장은 없다. 수명시험의 경우는 파괴시험이며 장시간의 시험을 요하므로 적은 시료를 시험하는 것이 일반적이다. 특히 자동차공업에 있어서 수명시험은 중요한 품질특성의 하나이며 자동차의 조립에 쓰이는 수만개 부품의 수명을 예측하는 것은 매우 중요한 일이다. 따라서 이 적은 시료에서 얻어낸 데이터를 이용하여 "어떻게 수명의 예측을 올바르게 할 것인가\ulcorner" 하는 문제, 즉 신뢰성의 추정(Reliability Inference)과 로트의 판정이 중요한 문제인 것이다. 이러한 문제의 한 가지 방법으로서 외국에서 이미 널리 활용되고 있는 대수정규확율지를 이용한 수명데이터의 해석 방법을 소개하고자 한다.이터의 해석 방법을 소개하고자 한다.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.4
• /
• pp.249-257
• /
• 2001

본 논문에서는 경남 양산지역의 퇴적층에서 채취한 불교란 시료를 이용하여 표준압밀시험($IL_{CON}$)과 일정변형률(CRS, Constant Rates of Strain) 압밀시험을 수행한 후 각각의 시험결과를 분석하여 양산점토의 투수특성을 고찰하였다. 이를 위하여 투수계수와 간극비의 관계를 Kozeny(1927)와 Carman(1956) 이후 제안된 많은 연구결과와 비교, 검토하였으며, 시료를 연직방향으로 성형하여 CRS 시험을 수행한 후 횡방향투수계수를 산정하여 양산점토의 투수계수의 이방성을 살펴보았다. CRS시험 결과, 직접적으로 정상류를 발생시켜 누수계수를 측정하는 Rowe cell 시험에 비하여 상대적으로 투수계수의 이방성이 과소평가되는 경향을 보였다. 또한 현장 투수계수에 영향을 미치는 요소들을 살펴보고, 깊이에 따른 투수계수를 고찰하였다.다.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.2
• /
• pp.5-14
• /
• 2010

In this study, cyclic triaxial tests were performed under anisotropically consolidated condition by using irregular earthquake loading to consider in-situ condition and seismic wave. Jumunjin sand with a relative density 50 percent was used in the tests. The consolidation pressure ratio (K) was changed from 0.5 to 1.0. The Ofunato and Hachinohe wave were applied as irregular earthquake loadings and liquefaction resistance strengths of each specimen were estimated from the excess pore water pressure (EPWP) ratio. As a results of the cyclic triaxial tests, EPWP ratio increased with increased K value. It shows that isotropically consolidated sand is more susceptible to liquefaction than anisotropically consolidated sand under equal confining pressure and dynamic loadings. From the test results, the relationship between K and EPWP ratio normalized by effective confining pressure and deviator stress was proposed. And a new factor which corrects the liquefaction resistance strength for the in-situ stress condition is proposed.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.8
• /
• pp.137-147
• /
• 2007

Isotropic (instant loading) and Ko (gradual increase loading) consolidation tests were conducted in triaxial test equipment using cylindrical sample (5.0 cm in diameter and 10.0 cm in height) on two marine clay deposits. The duration of primary consolidation was estimated by two curve fitting methods using measured strain. A differential equation of consolidation for drainage in the radial and vertical direction was solved by the implicit finite difference scheme. The results of two curve fitting methods were compared with the numerical solutions to evaluate the appropriate axial loading rate of Ko consolidation and the primary consolidation periods. In addition, primary consolidation periods of the samples with a diameter of 35 mm and a height of 70 mm were calculated. The relation of radial and vertical consolidation coefficients is also presented.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5C
• /
• pp.313-320
• /
• 2008

The discharge capacity testing apparatus using penetration method, being able to simulate in laboratory the condition of embedding plastic board drains in field, was developed to investigate consolidation characteristics of ground and to figure out discharge capacity of drains. The developed apparatus with a mandrel and penetrating device was designed to insert PBD into the ground prepared by previously applied pressure, being different from the conventional testing method that the drain was installed and the ground material was poured subsequently. Discharge capacity tests with the conventional apparatus as well as the newly developed one were performed to assess the applicability of the latter. As a result of tests, the conventional method showed delayed consolidation due to overall disturbance of ground and local deformation of drain caused by inhomogeneity of ground. Therefore discharge capacity of drain with the conventional apparatus was measured more or less larger than the expected values whereas discharge capacity with new one could be measured similar to the actual value in field.

• The Korean Journal of Pesticide Science
• /
• v.21 no.1
• /
• pp.42-48
• /
• 2017

This study was conducted to compare the effect of bagging technique on the presence of pesticide residues in various parts of grape fruit (whole fruit, pulp and peel). The tested pesticides were diluted at 2,000 times and sprayed three times onto the crops at an interval of seven days and then they were collected at 0, 1, 3, 5 and 7 days after final application. Later, bagging/non-bagging samples were pre-treated with fruit, pulp and peel samples, respectively. Thiacloprid and lufenuron were not detected in any of the bagging samples. The thiacloprid residues of non-bagging samples in whole, peel and pulp samples were 0.47-1.09, 0.18-0.33 and 1.24-1.67 mg/kg, respectively. The lufenuron residues of non-bagging samples in whole fruit, peel and pulp samples were 0.16-0.62, < LOD-0.08 and 0.85-1.48 mg/kg, respectively. The biological half-lives of thiacloprid and lufenuron in whole fruit, peel and pulp of non-bagging samples were 5.7, 15.1 and 7.8 days and 4.0, 9.4 and 2.6 days, respectively. While the unbagged samples showed a sequential decrease in pesticide residues, this study concludes that bagging would be an effective method to protect the presence of thiacloprid and lufenuron residues in grape fruits.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.2
• /
• pp.138-143
• /
• 2014

BACKGROUND: Azadirachta Indica extract(AIE) and Sophorae radix extract(SRE) are widely used as environment-friendly organic materials of plant origin in South Korea. METHODS AND RESULTS: In this study, the in vitro micronucleus(vitMN) tests of two samples of AIE and SRE were conducted to evaluate their genotoxicity using the Chinese hamster lung(CHL) cell. This study was composed of two parts; cytochalasin B(cyto B) test and non-cyto B test. Mitomycin C and colchicine were used as positive controls. As a result, the incidence of micronucleus(MN) in all AIE and SRE treated groups increased in dose-dependent manner, but were less than 2.2% in 1,000 binucleated cells. In addition, there were no significant increases of MN incidence in all AIE and SRE treated groups, compared with the negative control group. CONCLUSION: Therefore, we suggest that AIE samples and SRE samples used in this study may have no genotoxicity in the in vitro micronucleus test using the CHL cells. In our previous study, we reported that AIE and SRE did not cause genotoxicity in Ames test. According to the genotoxicity battery system, we concluded that AIE and SRE used in this study have no genotoxic effects to humans.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.4
• /
• pp.133-140
• /
• 2021

There are few attempts to estimate the strength and stiffness of controlled low strength material (CLSM) using existing field-testing methods. The objective of this study is to evaluate the resilient modulus of CLSM by using the Light Weight Deflectometer (LWD) and investigate the relationships between the resilient modulus from LWD and the unconfined compressive strength (UCS) and secant modulus of elasticity from unconfined compressive test. Five CLSMs with different mix designs are used to evaluate the flowability and the stiffening of the CLSM in the flow and Vicat needle tests, respectively. To evaluate the early strength and stiffness characteristics, unconfined compressive tests are performed using the CLSM specimens cured for 1 and 7 days. LWD tests are carried out to estimate the resilient modulus of the CLSM specimens. The experimental results show that for the curing time of 1 day, the UCS and secant modulus of elasticity generally increase with the fast setting mortar content (FC). The CLSM specimen with the highest FC shows the significant increase in the UCS and secant modulus of elasticity along the curing time. Overall, the resilient modulus for the curing time of 1 day increases with the FC, while that for the curing time of 7days decreases with an increase in the FC. From the results, the linear relationships between the resilient modulus and UCS and secant modulus of elasticity are established.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.6
• /
• pp.804-809
• /
• 2007

In order to provide reliability. reproducibility. objectivity of solid particle separation performance test on marine centrifugal purifier, an investigation had been done on solid test dusts. test standards and designation of a definite standard test dust In test specifications or standards. ISO 121031-1 A2 test dust is the best test particle to meet commercial and military fuel oil and lube oil requirements on marine standards.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.9 no.4
• /
• pp.309-317
• /
• 2015

In this paper, we proposed the standard test specification for safety and function of hiking stick for the elderly. We have concluded nine factors representing specification of hiking stick through analysis of hiking patents and research papers, products survey of business market, case studies for damaged hiking stick and expert surveys. To test the factors, we designed three different kinds of apparatus to examine twist resistance, stick and tip durability and stick straightness. The sample of hiking sticks purchased from market based on Naver sales ranking top to fifteenth. As a result, we concluded six-standard test specification based on eccentric load, adjustable parts load, hand strap load, basket load, tip load and pull load of hiking stick.