• Journal of Conservation Science
• /
• v.28 no.4
• /
• pp.321-328
• /
• 2012

A $SO_2$ gas acceleration test was carried out on four textile groups (silk, cotton, ramie cloth, hemp cloth) which were categoried in five categories by the dyeing materials (undyed, red, yellow, blue, black) and the relation between the concentration of $SO_2$ and deterioration rate was evaluated. The textiles were exposed to 0.01, 0.12, 1, 10, 100, 1000, and 5000 ppm of $SO_2$ for 24 hours and the optical, physical, and chemical deterioration rates were studied. An optical change was identified as the color difference and grey scale rating (colorfastness) enhanced with the increase of gas concentration while there was little physical change. Chemical damage was caused by the acidification of the textile material due to the trapped sulfate ion concentration. The result of optical, physical, and chemical deterioration rates shows that 1 ppm/day $SO_2$ is a critical level of deterioration of traditional textiles.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.2
• /
• pp.77-84
• /
• 2001

To increase the utilization of soil survey results, classification of morphological types of paddy soils which was consisted of land-form, texture, and drainage classes etc. was attempted as an interpretive classification system. The paddy soils could be classified into 37 types. Among the types, the "Lfi(Fine loamy textured semi-wet paddy on local valley and fans)" acreage of about 224 thousand ha, "Lfd(Fine loamy textured dry paddy on local valley and fans)" 160 thousand ha. "Lmi(Coarse loamy textured semi-wet paddy on local valley and fans)" 112 thousand ha, and "Lkd(Loamy skeletal dry paddy on local valley and fans)" 93 thousand ha, respectively were the dominant types. The possibility of double cropping, plastic film house, green manure cropping etc., and that for soil managements such as application of raw straw or compost, deep plowing or adding fine earth materials, mole drainage, susceptibility to erosion or reduction injury etc. for each types were recommended.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.23 no.4
• /
• pp.277-282
• /
• 2003

This pot experiment was conducted in order to observe the effects of double superphosphate and fused phosphate application(T$_1$: control. T$_2$: double superphosphate application, T$_3$; fused phosphate application) on the seedling vigour, botanical composition, and yields of grass/clover mixed swards on newly reclaimed hilly soil. The results obtained are summarized as fellows: At the grassland establishment. the seedling vigour and yields of grass-clover mixed swards were much better by the T$_2$than the T$_3$. These favorable effects were more enhanced in white clover than orchardgrass. Compared with the T$_2$, the T$_3$resulted in the gradual increase of botanical composition and relative yield of white clover according to the cutting order. With the consideration of these results, double superphosphate could be favorable for pasture establishment and fused phosphate could be favorable for pasture management fertilizers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3312-3318
• /
• 2014

For the sunscreen development from natural resources, a possible usage of microalgal extracts or mycosporine-like amino acids (MAAs) was investigated. Sunscreens containing 7% of microalgal extracts or MAAs derived from microalgae, Chlamydomonas hedleyi, were prepared and they were applied to human research. Through this clinical research, the values of Sun Protection Factors, Sun Protector Factor (SPF) and Protection Factor of UVA (PFA), of sunscreen containing microalgal extracts or MAAs were determined: SPF values of microalgal extracts and MAAs indicated 9.07 and 9.42, respectively, while PFA ones did 2.43 and 2.41. Due to more than 2 of PFA value in both sunscreens, they can be classified into [PA+]. Taken together, although sunscreen containing microalgae-derived extracts or MAAs does not effectively protect UV irradiation, its capacity can be satisfied if inorganic UV-protecting compounds are added.

• Journal of Aerospace System Engineering
• /
• v.11 no.4
• /
• pp.48-53
• /
• 2017

Liquid rocket engines (LREs) are very complex systems that include combustion chambers, turbopumps, gas generators, ducts and tubes, valves and etc. Most components of the LREs require higher than or equal to level 6 IT (ISO Tolerance). The components along with pipe line and/or tubing must dispose not to interfere each other. In addition, effectiveness of maintenance and service after assembling should be considered when the allocation of the components are determined. Especially at the stage of the development, tolerance accumulations or unpredictable errors may result in misalignment and/or mismatches at interfaces of the parts. Namely, it is the engine assembling process that many inherent risks are realized and crises or incidents occur. Therefore, a rapid reaction system should be prepared. In this research, 7 tonf class liquid rocket assembling process was studied and actual building steps were introduced.

• Journal of the Korean Institute of Gas
• /
• v.22 no.6
• /
• pp.44-51
• /
• 2018

As the LNG storage tank is aged, if there is a crack in the outer wall concrete or corrosion of the reinforcing steel, there is a risk of a major accident such as collapse of the structure depending on the type and degree of damage. Since 2014, LNG storage tanks have undergone precise safety diagnosis and safety inspection has been carried out. The condition evaluation criteria for each component have been revised and applied in January 2016. The condition evaluation standard is to evaluate the status of storage tanks based on the appearance survey and material test results of LNG storage tanks and it is important for maintenance. In addition, the representative condition evaluation standard that shows the comprehensive state of each LNG storage tank is important in maintenance, but the related standard for LNG storage tank outer concrete is not available in Korea and abroad, and development of the condition evaluation standard is necessary. In this paper, we examined the structural characteristics of LNG storage tanks, analyzed the status of the condition evaluation criteria for each member, and developed a comprehensive status rating system by weighting the members. We used the AHP(Analytic Hierarchy Process) technique and developed a representative conditon evaluation criteria through surveys of professional organizations.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.2
• /
• pp.75-83
• /
• 2019

In this study, to propose the deterioration curves of urethane, ceramic, polysiloxane and fluorocarbon coating for the steel bridge, an accelerated corrosion tests were carried out. The each coating system wes applied on the top of the specimens, and circular initial defects were introduced with different diameters with 0.5, 1.0, 3.0, 5.0 mm. An accelerated corrosion test condition was used to simulate severe corrosive environment depending on ISO 20340. The deterioration curve of each coating type was evaluated based on deteriorated area from the circular defects. In order to evaluate the coating service life of installed steel bridge using deterioration curve, the acceleration coefficient was calculated at correlation between ISO 20340 and corrosivity categories by ISO 9223 based on field corrosion rate. From test results, the propagation rate of coating deterioration area was different to diameter of circular defects. In case of urethane coating, the coating service lifes of 3% deterioration area was evaluated in 31.8, 15.8, 9.9 and 3.9 years with C2, C3, C4 and C5 category.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.2
• /
• pp.164-177
• /
• 2022

Medical device usability evaluation refers to the evaluation of medical devices through actual users before the final prototype production is completed. IEC 62366, one of the international safety standards for electronic medical devices, is a standard that must be applied to obtain medical device licenses in major advanced countries such as Europe and the United States. In Korea, through the Ministry of Food and Drug Safety's notice, from January 2021, sequential application by grade has been implemented. In this study, 15 participant specialists were recruited through the Incheon G University Hospital Medical Device Convergence Center for formative evaluation during user suitability evaluation of the focused ultrasound stimulation system being developed by Icleo Co., Ltd., and the test was conducted through joint scenario development. . In the result of task performance, the performance rate was 90.67%, and after the completion of the performance, 86.67% of 'Easy user interface' and 94% of 'Identification/Readability/Understanding of information' questions in the participant survey results analysis by question. The response rate was above average.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.7 no.1
• /
• pp.109-117
• /
• 2005

This study was carried out to determine effects of the feeding length of spent mushroom composts from selenium-enriched mushroom (Se-SMC) on meat quality and carcass characteristics in finishing Hanwoo steers. A total of 20 steers were used in this trial with four treatments. Treatments included control (no Se-SMC), Se-SMC groups of three different feeding lengths (2, 4, and 6 months). After the completion for each feeding length, steers were slaughtered and then loin muscle (Longissimus dorsi) was sampled to evaluate meat quality characteristics. Chemical compositions of the loin, except for protein content, were not different across treatments. Protein content was highest in 6 months feeding groups, however, it was lowest in 4 months. Physical property and meat color (L*, a* and b* values) were not affected by the feeding length of Se-SMC. However, water holding capacity (WHC) for Se-SMC feeding treatments was significantly more improved (p<0.05) in comparison with the control group, showing 63.8 (2 months), 64.4 (4 months), 64.2 (6 months), and 59.5% (control), respectively. Grades for meat quality and quantity, and carcass characteristics were not affected by feeding length of Se-SMC. Our results showed that Se-SMC supplementation was not significantly associated with parameters for meat quality and carcass characteristics. However, as feeding Se-SMC lengthens, WHC for loin was more improved, suggesting that the improved WC may result in the expression of antioxidant effect.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.539-544
• /
• 2023

The subject of this study is the Maae Buddha statue in granodiorite of the Mesozoic Cretaceous period, which is concerned about stability as a standing stone cultural property located in ◯◯-dong, Gyeongsangbuk-do. For stability analysis, three-dimensional face mapping, geological properties of joints, three-dimensional scanning, ultrasonic velocity, polarization microscopy, electron microscopy analysis and XRD analysis were performed. In addition, the safety factor of the Maaebul was calculated by analyzing the damage status investigation, stereographic projection analysis, rock classification, and limit equilibrium analysis. The types and scales of damage and possible collapse by section depend on the degree of weathering of the rock and the orientation and characteristics of the joints, but wedge-failure and toppling-failure are expected to be small-scale. The safety factor of Maaebul in dry and wet conditions is less than 1.2, so stability is concerned. The types of damage were mainly observed, such as exfoliation, cracking, granular decomposition, and vegetation growth. The Maaebul rock is granodiorite, and the surface discoloration materials are K, Fe, and Mg. The 4 sets of joints are developed, J1 is tensile joint and the others are shear joint. The uniaxial compressive strength estimated by ultrasonic exploration is 514kgf/cm2, which corresponds to most soft rocks and some weathered rocks. Rock classification(RMR) is estimated to be grade 5, very poor rock mass. These technique along with the existing methods of safety diagnosis of cultural properties are expected to be a reasonable tool for objective interpretation and stability review of stone cultural properties.