• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.9 s.351
• /
• pp.120-127
• /
• 2006

In Korea the vehicle enforcement system(VES) detects speeding vehicle using two inductive loop detectors. And the speed reliability of theirs are evaluated through the analysis of image frame which is captured from video camera. This method is validated to evaluate VES on Korea Laboratory Accreditation Scheme(KOLAS) but it needs much time and expense for the analysis of image frame. Because the number of VES are increasing rapidly, the requirement of new evaluation method is necessary. On this paper, the tape switch sensor as a substitution of existing method was introduced and its application on the site are discussed. On the site test we compared the tape switch sensor on the speed measurement of vehicle with the video image frame. As a result we have founded that the tape switch sensor is evaluated to be feasible system on site in respect to measure the overspeed vehicle.

• Information Systems Review
• /
• v.7 no.1
• /
• pp.275-295
• /
• 2005

Changes in business environment caused by globalization of the world economy and the beginning of the knowledge society forced hospitals to equip with tools for the enhanced competitiveness. In other words, hospitals must aim three targets such as acquisition of advanced medical skills and equipments, improvement of service level for patients, and achievement of superior managerial performance simultaneously. This study has been done to suggest a way to reduce the possibility of hospital bill claim reduction as an alternative for the achievement of superior managerial performance. If the reduction rate of hospital bill claim is high, it will put negative impact on the hospital's revenue stream and hospital's reliability. Thus, if they want to stay competitive, hospitals need to device ways to cut the reduction rate as much as possible. In this study, a prototype system has been developed and implemented to check the possibility to cut the reduction rate through deep analysis of causes of reduction. The prototype first developed utilizing data mining techniques and the relation rules algorithm. Then the prototype was tested its performance using the D hospital's live data.

• Journal of Animal Environmental Science
• /
• v.1 no.2
• /
• pp.117-124
• /
• 1995

This study was carried out to investigate the effect of depth of sawdust bedding and ground material in dairy cattle barn. Treatment included the concrete floor with a 10cm or 30cm sawdust and the earth floor with a 30cm sawdust. Eighteen cows were assigned to 3 pens with 16.5㎥/head bedding area. The results obtained were as follows : 1. The temperature of sawdust bed was highest in the earth floor with 30cm sawdust, and the moisture content of sawdust bed was highest in the concrete floor with 10cm sawdust bed. 2. Cows defecate feces 9.2, 8.7 and 9.3 times a day in 10cm sawdust on concrete floor(10S+C), 30cm sawdust on concrete floor(30S+C) and 30cm sawdust on non concrete floor(30S+ NC) respectively. In average, they excreta 9.1 times/day(85.8%) in the sawdust beds and 1.5 times/day(14.2%) in the feeding alley. 3. The ratio of daily water amount deposited vapor to total water amount deposited in sawdust beds was 74.0%, 61.5% and 47.1% in 10S+C, 30S+C and 30S+NC respectively. 4. N.P.K contents in the sawdust beds were higher for 10S+C compared with other treatments. 5. When 30cm of sawdust was applied on the earth ground NO$_3$-N contents in the sawdust bed was 37.7, 14.1 and 15.0ppm in depth of 30, 60 and 90cm under the ground, respectively, indicating some possibility of water pollution.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.673-676
• /
• 2020

In this paper, we propose a whole-body management system using ultra-low temperature cyclical cooling method combined with IT technology. The proposed system has the following characteristics. First, it minimizes maintenance costs by circulating nitrogen gas cooled by ultra-low temperature inside the controller. Secondly, based on the information measured by the temperature sensor and oxygen concentration sensor, nitrogen gas is supplied to provide safe ultra-low temperature whole-body management. Thirdly, after entering the user's height, it provides convenient, ultra-low temperature whole-body care that can be controlled using an automatic lift. Fourth, it provides an easy-to-access, easy-to-manage GUI and a manager-only web program for whole-body management system operation. The results tested by the authorized testing agency to assess the performance of the proposed system were measured in the range of ±5%, the world's highest temperature sensor accuracy, and a range of -110℃ to -150℃ greater than the world's highest whole-body management temperature range(-110℃ ~ -140℃). In addition, humidity was measured at less than 40%, the world's highest, and oxygen concentration was more than 18%, the world's highest. Therefore, the effectiveness of the methods proposed in this paper was demonstrated because they produced the same results as the world's highest levels.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.1
• /
• pp.99-107
• /
• 2001

Manufacture of fishing vessel is needed the effective material for light, strength, fire and corrosion of water in order to improve durability by high-speed and fishing. These fishing vessel can be divided into FRP and AI alloys fishing vessel. FRP fishing vessel is light and effective for strength but highly ignited and susceptible to heat during the manufacturing ship by-produce noxious component for human. In the case of a scrapped ship, it cause environmental pollution. On the other hand, aluminum is a material in return for FRP and has merit of high-strength and lightness. It's more heat proof and durable than FRP and superior to prevent from corrosion. Al alloys fishing vessel development is rising as an urgent matter. But, al alloy has some defect of bad weldability, welding transformation, cracks and overcost of construction. Therefore this study is to develop the new welding joint shape solving aluminum defects and mechanical behavior. First of all, strength was compared and reviewed by analysis of plate, stiffen plate, new model simplified by using plate theory. On the base of this result, plate and new model of temperature distribution, weld residual stress and strength of tensile, compressive force were compared and reviewed by finite element computer program has been developed to deal with heat conduction and thermal elasto plastic problem. Also, new model is proved application possibility and excellent mechanic by strength comparison is established to tensile testing result.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.9
• /
• pp.185-192
• /
• 2011

The purpose of this paper is to propose the design and implementation of a korean style internet-based test system on the basis of efficiency and stability for middle server. The current assessment system has some unstable elements with regard to transmission procedure, cost, system load and stability. This paper proposes a series of activities for the performance improvement of korean style internet-based test system which finally produced various excellent results in the administration of expense control, human resources, and special operational affairs. The proposed system's technological factors using middle server have been tested through a basic simulation pilot system. Actual development procedure starts from the analysis required by improving the shortcomings of existing internet-based test systems. A efficiency comparison with existing system and newly developed system was made in the area of number of operators, abnormal processing, system maintenances. Korean style internet-based test system using middle server has shown great efficiency increased to the maximum of 2 times about the effectiveness of processing for various parts. The korean style internet-based test system using middle server have been given good evaluations with regard to the convenience of their use and the management system for operators and supervisors.

• Journal of Korea Port Economic Association
• /
• v.33 no.4
• /
• pp.83-98
• /
• 2017

Being in the globally competitive environment, public port enterprises which accentuate on the employment of excellent talents to procure competitive advantage are introducing the NCS(National Competency Standards)-based employment system that focuses on job skills. This study mainly aims to analyze the actual status of NCS utilization among public port enterprises and its usefulness as well as performance. The appropriateness, efficiency, satisfaction, comprehensiveness and performance of the current NCS - based employment system were analyzed by using collected data from the recruiting officers and new employees as subjects. And eventually an improvement plan was suggested. The result of analysis shows that the appropriateness and satisfaction level of NCS - based employment system are generally high; while its effectiveness, applicants' recognition and acceptance level as well as performance are slightly higher. Moreover, the job capability and performance on the job of new employee selected by the NCS employment system were analyzed to be higher when the appropriateness and satisfaction level of that system is high. In order to establish NCS - based employment system, early formulation and implementation of job performance assessment system to evaluate the actual abilities and performance of job is necessary. This study suggested the NCS - based employment system is effective for public port enterprises to procure excellent talents, as well as being useful for job preparation of job seekers according to the job competencies requirement of the enterprises. Therefore, this study contributes to the proliferation of NCS - based recruitment system.

• Korean journal of applied entomology
• /
• v.45 no.3 s.144
• /
• pp.317-325
• /
• 2006

According to the preceding survey on insect pests of the green perilla, Perilla frutescens var. japonica HARA, The major pests were Aphis egomae Shinji, Pyrausta panopealis (Walker), Tetranychus urticae Koch, Polyphagotarsonemus lotus Banks, Tetranychus kanzawai Kishida at Guemsan, Chungnam, 2004. Aphis egomae causes nearly 100% injury of the green perilla in uncontrolled green houses. A field study was conducted to estimate economic injury levels (EILs) and control thresholds (CTs) for A. egomae injuring green perilla in green houses. Different densities of A. egomae ranged from 1 to 80 aphids per 100 plants in early inoculation. The mean injurying rate of plant was 2.4% to 40.5% at the end of June at differently inoculated levels. The economic loss time calculated by the ratio of cost managing aphid to market price (C/V) (C: cost managing aphid, V: Market price) in early season (from May to 13. June) was 5.8% and in peak season (from 13. June to 30. June) was 9.3%. Economic injury level in early and peak season was 5.3 aphids per plant and economic injury levels in peak season were 0.6 aphids per plant and 7.6% injured rate of plant. The control thresholds calculated by 80% level of economic injury level in peak season were 0.5aphids per plant and 6.1% injury rate of plant, respectively.

• Korean Journal of Plant Resources
• /
• v.9 no.1
• /
• pp.63-69
• /
• 1996

The experiment was conducted to reduce the labor and production cost with the labor save of harvest in cultivating the onion using the machine and the results are as follows. On labor saving effect in transparent vinyl mulching, digging working hours per 10a in the case of using tractor are 55 min., fixing + turning time is 11 min.,the time of harvest is 66 min, digging working hours using cultivator are 90 min. and fixing + turning time is 9 min., but the time of hand harvesting is 693 min and 41 sec. and in digging labor saving effect, tractor shows 90% in the harvesting period and harvest by cultivator 86%. On nonmulching cases, the harvest by tractor takes 44 min. and that by cultivator does 75 min, and digging labor saving effect shows 93.6% in the tractor harvest and 89% in the cultivator harvest. Therefore, on the operation efficiency per hour, in the case of tractor with digger vinyl mulching and nonmulching show $0.091\sim0.136ha$ and in the case of cultivator with digger-both show $0.061\sim0.08ha$, but in the case of hand harvest, vinyl mulching and nonmulching are $0.008\sim0.009ha$, so in the mechanized harvest of onion, the harvest by tractor with digger is the best. On the cost and labor save for harvesting the onion with labor saving effect, tractor shows 19 hours and 26min./10a in vinyl mulching and 18 hours and 54min./10a in nonmulching, so it shows the short hours for harvesting. And labor saving effect shows 37% in comparison with 29 hours and 49 min. $\sim30$ hours and 38 min.($110,587\sim113,925won$) of the hand harvest, so the cost was reduced to $69,525\sim72,225won$. On the cultivator with diggers, vinyl mulching takes 19 hours and 49 min and nonmulching 20 hours and 2 min., so the labor saving effect and cost were reduced to $32\sim36%$($73,087\sim75,075$ won) in comparison with the hand harvest.

• Geophysics and Geophysical Exploration
• /
• v.8 no.2
• /
• pp.156-162
• /
• 2005

Particularly in research related to seawater intrusion the change of fluid electrical conductivity is one of major concerns, and effective monitoring can help to optimize a water pumping performance in coastal areas. Special considerations should be given to the mounting of sensors at proper depth during the monitoring design since the vertical distribution of fluid electrical conductivity is sensitive to the characteristics of seawater intrusion zone. This tells us the multi-channel electrical conductivity monitoring is of paramount consequence. It, however, is a rare event when this approach becomes routinely available in that commonly used commercial stand-alone type sensors are very expensive and inadequate for a long term monitoring of electrical conductivity or water level due to their restricted storage and difficulty of real-time control. For this reason, we have developed a real-time monitoring system that could meet these requirements. This system is user friendly, cost-effective, and easy to control measurement parameters - sampling interval, acquisition range, and others. And this devised system has been utilized for the electrical conductivity monitoring in boreholes, Yeonggwang-gun, Korea. Monitoring has been consecutively executed for 24 hours, and the responses of electrical conductivity at some channels have been regularly increased or decreased while pumping up water. It, with well logging data implemented before/after pumping water, verifies that electrical conductivity changes in the specified depths originate from fluid movements through sand layer or permeable fractured rock. Eventually, the multi-channel electrical conductivity monitoring system makes an effective key to secure groundwater resources in coastal areas.