• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.425-435
• /
• 2017

Structural analysis is used not only for large enterprises, but also for small and medium sized ones, as a necessary procedure for strengthening the certification process for product delivery and shortening the time in the process from concept design to detailed design. Open-source solvers that can be used atlow cost differ from commercial solvers. If there is a problem with the input data, such as with the grid, errors or failures can occur in the calculation step. In this paper, we propose a pre- and post-processor that can be easily applied to the analysis of mechanical structural problems by using the existing structural analysis open source solver (Caculix, Code_Aster). In particular, we propose algorithms for analyzing different types of data using open source solvers in order to extract and generate accurate information,such as 3D models, grids and simulation conditions, and develop and apply information analysis. In addition, to improve the accuracy of open source solvers and to prevent errors, we created a grid that matches the solver characteristics and developed an automatic healing function for the grid model. Finally, to verify the accuracy of the system, the verification and utilization results are compared with the software used.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.6
• /
• pp.545-557
• /
• 2017

The study is about the efficient alternative to concrete surface in the field of visual inspection technology for deteriorated infrastructure. By combining industrial drones and deep learning based image analysis techniques with traditional visual inspection and research, we tried to reduce manpowers, time requirements and costs, and to overcome the height and dome structures. On board device mounted on drones is consisting of a high resolution camera for detecting cracks of more than 0.3 mm, a lidar sensor and a embeded image processor module. It was mounted on an industrial drones, took sample images of damage from the site specimen through automatic flight navigation. In addition, the damege parts of the site specimen was used to measure not only the width and length of cracks but white rust also, and tried up compare them with the final image analysis detected results. Using the image analysis techniques, the damages of 54ea sample images were analyzed by the segmentation - feature extraction - decision making process, and extracted the analysis parameters using supervised mode of the deep learning platform. The image analysis of newly added non-supervised 60ea image samples was performed based on the extracted parameters. The result presented in 90.5 % of the damage detection rate.

• Journal of Broadcast Engineering
• /
• v.22 no.5
• /
• pp.570-577
• /
• 2017

Recently, with the development of broadcasting communication, users expect to receive high quality and various broadcasting services anytime, anywhere. In the case of terrestrial broadcasting, HD broadcasting and mobile broadcasting are provided at different frequencies. In the case of terrestrial UHD, which recently started trial broadcasting, 700MHz frequency is used which is different from the existing one. If the contents of the same contents are transmitted at different frequencies, it can be considered ineffective in terms of the use efficiency of the terrestrial broadcast frequency. As a method to solve this problem, a transmission system model and a service have been proposed for transmitting the hierarchical encoded UHD contents by SHVC on the basis of the multimedia transmission technology MMT in a heterogeneous network environment combining broadcast network and communication network. However, it is still in the initial stage of study the receiving model that can reliably receive various quality UHD contents in various environments such as mobile and fixed environment. Therefore, in this paper, we propose a receive buffer model that can reliably receive UHD contents layered on SHVC based on MMT.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.27-35
• /
• 2009

This study was conducted to suggest resonable quality measurement methods of asphalt pavements to be used in the Pay adjustment. The Pay adjustment is a method to adjust the construction cost according to the pavement quality based on the statistic theories. Many U.S states use Pay adjustment and the PWL(Percent with in Limit) is calculated using their quality index tables. In this study, the application of PWL in Korea was evaluated by comparing the PWL South Carolina with the probability theories. The probability values and the PWL obtained using the data collected from the test roads were used to determine the pay factors suggested by AASHTO and the pay factors between them were closed to each other. In addition, the PWL was very similar to the probability obtained using the predicted average of the population when calculating the Z-values. The pay factors were obtained using artificial data whose average satisfied the codes and whose standard deviation was large. The pay factors were less than 100% in the quality measurements can be performed using the PWL methods, and with the development of the korea quality index table, the PWL methods can be applied in korea.

• Korean Journal of Animal Reproduction
• /
• v.19 no.2
• /
• pp.147-152
• /
• 1995

The purpose of this study was to examine the estrus synchronization and superovulation of pigs with hormone treatments. Three different kinds of procedures for synchronization and superovulation were used as follow: I) gilts in natural estrus behavior (control): 2) gilts synchronized with 20mg altrenogest for 9 days regardless of the estrus cycle; 3) gilts received PG600 (400IU PMSG + 200 IU hCG) in 15 day of the estrus cycle; and then gilts administrated with PMSG (1,500 IU) and hCG (750 IU) after altrenogest and PG600 treatment for superovulation. Estrus was checked daily with a boar, in estrus synchronization, the intervals from hormone treatment to estrus were different between PG600 (43/47) and altrenogest (13/53) within 6 days. The percentage of animals displaying a estrus response were not different by hormone treatments. The average number of corpora lutea (C.L) and ovulated embryos were similar between PG600 25.4${\pm}$13.1, 19.0$\pm$12.8 and altrenogest 25.5${\pm}$0.7, 15.0${\pm}$4.2, respectively, but was increased (P<0.05) by hormone treatment compared to that 12.9${\pm}$1.8, 12.7${\pm}$3.9 in the control. The number of normal embryos after ovulation was higher in the control than hormone treatment. Therefore, these results suggest that altrenogest and PG600 treatment could be a valuable for cut down the labour and cost by synchronization.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.5
• /
• pp.463-470
• /
• 2006

This paper deals with a new 3-phase power quality disturbance generator. The proposed generator can provide phase jump as well as voltage sag, swell, outage, unbalance, and over and under voltage. The operating principle of the generator is described in each mode of disturbance. The magnitude of the phase jump is analysed and it is found that the magnitude is the function of the turn-ratios of the transformers consisting the generator. The scheme has simple structure compared with the conventional one, and the major components of the proposed scheme are SCR thyristor and transformer, which guarantees high reliability and cost-effective implementation of the generator. Furthermore, high efficiency can be obtained because there is no PWM switching of the semiconductor devices, and it is easy to control the system. Simulations are carried out to confirm the operation in each disturbance mode, and experiments has been done with 5kVA power rating. The usefulness of the proposed scheme is verified through simulation and experimental results. It is expected that the scheme can be applied to the performance test of the custom power devices such as UPS, DVR, DSTATCOM, and SSTS with cost-effective system.

• The Korean Journal of Pesticide Science
• /
• v.8 no.1
• /
• pp.46-53
• /
• 2004

Adsorption and leaching characteristics of hexaconazole were investigated to estimate the mobility potential of the compound in the soil environment. As well fitted to Freundlich adsorption isotherm, adsorptivity of hexaconazole, ranged 10.56-18.01 of Kf values, seemed high enough to be immobile in soil. This chemical leached more faster from fresh soil with rice plants. Most of $^{14}C$ (86-99% of originally applied $^{14}C$) was distributed within 5 cm soil depth from surface. Considering Koc values of 1,400-1,552 and Groundwater Ubiquity Score (GUS) indices of 1.25-1.35 as well as results from leaching experiment with soil column, hexaconazole falls into the category of improbable leacher, suggesting little mobility in soil.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.5
• /
• pp.476-486
• /
• 2004

This paper is the second part of the study on the development of a smart active layer (SAL) sensor, which consists of two parts. As mentioned in the first paper, structural health monitoring (SHM) is a new technology that is being increasingly applied at the industrial field as a potential approach to improve cost and convenience of structural inspection. Recently, the development of smart sensor is very active for real application. This study has focused on preparation and application study of SAL sensor which is described with regard to the theory and concept of the SAL sensor in the first paper. In order to detect elastic wave, smart piezoelectric sensor, SAL, is fabricated by using a piezoelectric element, shielding layer and protection layer. This protection layer plays an important role in a patched network of distributed piezoelectric sensor and shielding treatment. Four types of SAL sensor are designed/prepared/tested, and these details will be discussed in the paper In this study, SAL sensor ran be feasibly applied to perform structural health monitoring and to detect damage sources which result in elastic waves.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.4
• /
• pp.310-315
• /
• 1999

The feasibility of an absorbent biofilter system was examined for rural wastewater treatment. Hydraulic loading rates varied from 50 to 250 cm/day. Effluent of the septic tank was fed into the absorbent biofilter, and small ventilation fan was provided to supply air at the rate of 250 L/min to aerate the biofilter. The biofilter system demonstrated high removal rates for $BOD_5$ and TSS at the loading rate of 150 cm/day, generally meeting the Korean effluent water quality standard of 20 mg/L applicable to both. The nutrient removal was less satisfactory than the results of $BOD_5$ and TSS, but it was within the expected range of biological treatment processes. Considering the abnormally high influent concentration of nutrients during the experiment, better performance results could have been obtained if ordinary domestic wastewater was used. The system performance was not significantly affected by the hydraulic loading up to 150 cm/day, which is far more than the loading limit of the sand filter systems. Maintenance requirement was minimal, and no problems with noise, odor, flies or sludge arose. Since the biofilter system can be operated at a distance, operation in remote rural area and multi-system connected to one control office might be advantageous to the rural area. Overall, considering the cost-effectiveness, stable performance, and minimum maintenance, the biofilter system was thought to be a competitive alternative to treat wastewater in Korean rural communities.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.6
• /
• pp.382-386
• /
• 2000

This study was conducted to know the optimum conditions for overwinter culture of sweetpotato stems in PE film house. The stems will be used as transplant shoots in the next year instead of sprouts produced from storage roots. Sweetpotato stems were cut at field on harvest season and planted in PE film house under three different conditions of PE film mulching, tunnel, or mulching plus tunnel in comparison with the non-treatment of PE film on October 10 and November 10. The survival rate of sweetpotato stems, which was evaluated on April 10 after overwinter, was higher in the treatment planted on October 10 than that on November 10, and with PE film treatments, it was higher in tunnel or mulching plus tunnel than that of the non-treatment of PE film. The survival rate of sweetpotato stems to planting densities was 95-96% in 10$\times$2cm (333 stems/$m^2$) or in 10$\times$4cm (250 stems/$m^2$) when compared with 10$\times$2cm (500 stems/$m^2$). The survival rate under low temperature showed 95% until 20 days at 5$\pm$1$^{\circ}C$, and 0% within 5 days at 2$\pm$1$^{\circ}C$. From these results, it was concluded that there were optimum conditions that cutting time is middle October, planting density is 10$\times$3cm, and minimum maintenance temperature is 5$^{\circ}C$ in growing conditions of sweetpotato stems. Root yield produced by trans-planting shoots using the stems was similar to yield by shoots produced from roots, and the survival rate was not different among varieties.