• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.184-189
• /
• 2018

Recently, research on lightweight automobiles is increasing continuously to respond to the high safety standards and environmental regulations. The application of high strength steel is one of the effective methods for developing lightweight car bodies. A TWB (Tailor Welded Blank) is major method that allows partial high strength with light weighting using a multi-thickness and multi-material welded blank. On the other hand, additional welding process is required to prepare the blank and quality control for the welding process also required. To secure this point, the TRB (Tailor Rolled Blank) method was suggested. In the TRB method, the thickness of sheet is controlled by the rolling presses and the production efficiency is much higher than welding in TWB methods. In this study, the formability of high strength TRB steel plate was analyzed to examine the rolling effect of the blank. The formability of the specimen was tested using 0.8 and 1 mm thick steel sheets for the TRB plate. The strain was analyzed by the digital image sensing of grid markings on the specimen and the forming limit diagram was calculated. An Erichsen test for the 0.8 and 1 mm thick TRB specimens was carried out and the formability was investigated by comparing with FE analysis.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.1
• /
• pp.55-60
• /
• 1984

An experiment on the efficiency of soybean meal substituted for fish meal in the diet of common carp was carried out at the Fish Culture Experiment Station of the National Fisheries University of Pusan from June 27 to August 25, 1983. The carp used for the experiment were 50 fish each lot, each averaging 26 g in initial weight (total weight 1300 g). The experimental diets contained $10\%,\;20\%,\;30\%$, and $40\%$ soybean meal ($44\%$-protein) at iso-protein content basis in place of white fish meal in the control diet which contained $35\%$ protein. The growth rate in the control division was highest with progressive decrease in performance of the fish with increasing rates of soybean meal substituted in the test diets. Nevertheless, the $10\%\;and\;20\%$ soybean meal test diet groups showed acceptable conversions and growth rates, i. e. feed coefficients being 1.28 and l.30 and daily growth rates, $1.708\%\;and\;1.694\%$ compared to $1.22\%\;and\;1.758%$ for the control group, respectively. Therefore, soybean meal could be substituted for fish meal in carp diet by $20\%$ without significant differences of performance with some saving in feed cost.

• Journal of the Korean Society for Railway
• /
• v.16 no.1
• /
• pp.7-13
• /
• 2013

A scaled version of a roller rig is developed to demonstrate the dynamic characteristics of a railway vehicle for academic purposes. This rig is designed based on Jaschinski's similarity law. It is scaled to 1/10 of actual size and allows 9-DOF motion to examine the up and down vibration of a train set. The test rig consists of three sub-hardware components: (i) a driving roller mechanism with a three-phase AC motor and an inverter, (ii) a bogie structure with first and second suspensions, and (iii) the vehicle body. The motor of the rig is capable of 3,600rpm, allowing the test to simulate a vehicle up to a maximum speed of 400Km/hr. Because bearings and joints are properly connected to the sub-structures, various motion analyses, such as a lateral, pitching, and yawing motion, are allowed. The slip motion between the rail and the wheel set is also monitored by several sensors mounted in the rig. After the construction of the hardware, an experiment is conducted to obtain the natural frequencies of the dynamic behavior of the specimen. First, the test rig is run and data are collected from six sets of accelerometers. Then, a numerical analysis of the model based on the ADAMS program is derived. Finally, the measurement data of the first three fundamental frequencies are compared to the analytical result and the validation of the test rig is conducted. The results show that the developed roller rig provides good accuracy in simulating the dynamic behavior of the vehicle motion. Although the roller rig designed in this paper is intended for academia, it can easily be implemented as part of a dynamic experiment of a bogie and a vehicle body for a high-speed train as part of the research efforts in this area.

• Journal of Korean Society of Transportation
• /
• v.10 no.1
• /
• pp.55-62
• /
• 1992

교통수요는 교통정책 및 교통시설 계획의 수립 및 평가에 중요한 영향을 미치게 되므로 교통수요의 예측은 교통연구에서 중요한 부문을 차지하고 있다. 도로밑에 설치된 전자차량감지기(Electronic Vehicle Detector)로부터 자동 수집된 링크 교통량 자료(Traffic Counts)를 주요 입력자료로 이용하여 계획지역의 기종점 통행표(Origin Destination Trip Matrix)를 작성할 수 있는 기법 들이 최근 수년동안 많이 발달하게 되었다. 이러한 새로운 기법들은 가구조사(Home Inteview), 노변면접조사(Road-Side Interview)등을 토하여 조사된 자료를 기초로하는 전통적은 4단계 교통수요추정방법(Conventional 4-Stage Estimation Method)-통행발생(Generation), 통행분포(Distribution), 수단선택(Modal Split), 교통배분(Assignment)-과 비교하여 첫째로 정확도가 높은 링크 교통량 자료를 별도의 조사를 거치지 않고서도 수집이 가능하기 때문에 조사비용이 거의 들지 않아도 되어 경제적이고, 둘째로 전통적인 수요예측방법들에서 요구되어지는 복잡한 모형수립 및 계수조정(Parameter Calibration)이 필요하지 않아 간편하고 셋째로 오래전에 작성된 기종점 통행표를 단순히 링크 교통량 자료만을 이용하여 쉽게 보완할 수 있어 지속적인 자료의 축적(Data Age-ing)이 가능하며 더 나아 가서 소위 연속적인 교통 계획 및 교통시설관리(Continuous Transport Planning and Management)를 가능케 하는 등의 여러 장점 때문에 많은 주목을 받아 오고 최근 몇 년이 꾸준히 실무에 유용하게 적용이 되고 있는 실정이다. 본 연구는 링크 교통량자료를 이용하여 기종점 통행표를 작성하기 위하여 개발된 기존의 여러 기법들 가운데 특히 용량제약조건(Capacity-Restrained Condition)하에서 기존의 방법들을 상호 검토한 후 Wardrop의 교통망 평형원칙(Wardrop's First Network Equilibrium Principle)을 만족하는 새로운 추정기법을 제의하고 이의 시험결과를 논의하는 것을 주요내용으로 한다. 링크 교통량 자료를 이용하여 기종점 통행표를 작성하는 기법들의 근본 목표는 조사된 링크 교통량(Ob-served Traffic Counts)에 가장 근접한 교통망 통행 배정 링크 교통량(Assigned Link Volumes)을 재현(Re-producing)할 수 있는 기종점 통행표들 중에서 최적의 기종점 통행표를 발견하는 것이다. 따라서 교통망에서 통행자의 여행 경로 배정을 가장 잘 반영할 수 있는 현실적인(Realistic) 교통망 통행 배정 모형(Net-work Traffic Assignment Model)의 선택은 중요한 요소가 되며 특히 교통망에 교통체증(Traffic Conges-tion)이 심할 경우 교통망 통행자 평형조건(Network Traffic Equilibrium Condition)을 고려하기 위한 특별한 처리가 요구되어진다. 본 연구는 Whllumsen(Hall, Van Vliet and Willumsen, 1980)에 의하여 개발된 ME2(Maximum Entropy Matrix Estimation)기법에서 반복식 추정방법(Sequential Estimation Method)을 사용할 경우 Wardrop의 평형조건을 만족하는 기종점 통행표를 구할 수 없다는 단점을 극복하기 위한 방안으로서 엔트로피 극대화문제와 교통망 평형 조건(Entropy Maximisation and Network Equilibrium Condition)의 두 문제를 동시에 해결할 수 있는 새로운 수식모형과 이를 풀기 위한 알고리즘(Simultaneous Solution Algorithm)을 제의하였다. 제의된 수식모형과 알고리즘을 예제 교통망(Example Network)을 이용한 시험하고 그 결과를 ME2 의 반복식 추정 방법으로부터 구한 기종점 통행표와 비교 검토하였다.

• Journal of Mushroom
• /
• v.13 no.4
• /
• pp.288-293
• /
• 2015

In the structural investigation of cultivation facilities, the proportion of farmers to grown with double or triple structure were investigated 96%. It has been shown to grow with a stable cultivation facilities structure against environmental changes. The results of the analysis of the changes in the cultivation environment of Yeoju area in July-august, temperature and humidity of the external instrument shelter was $20.2{\sim}29.9^{\circ}C$ and 66.2~99.9% respectively. In the greenhouse 2 model capable of temperature environment regulation in the cultivation facility, temperature and humidity were investigated $19.3{\sim}25.7^{\circ}C$ and 81.6~99.9% respectively. Result of the survey of fruiting body characteristics and yields in the greenhous 2, pileus diameter and stipe length were investigated 66.2 and 54.1 mm, yield of mushroom and individual weight were 312 g and 26.6 g. High-temperature environment regulation shows the improvement of the quality and productivity of the mushroom. Power consumption of the air conditioning has been investigated using 56kwh/day, electricity costs were calculated 2195 won/day.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.147-151
• /
• 2005

Retort pouch is widely used in food industry for a long-term preservation and safe food production. By applying retort pouch technique to waxycorn storage, the quality of waxycorn could be maintained and the storage expense could be saved during storage. Water activities(Aw) of retort waxycorn were below 0.80 except blanching treatment, and it is known that microbial propagation is subdued below 0.80. Commercial value of waxy corn was deteriorated when it was frozen quickly at $-40^{\circ}C$ before treating Retort due to obscurity of chromatocity, while the color change was not noticeable when it was treated with Retort at $121^{\circ}C$ for 10min. For all treatments, very small amounts of free sugar were detected, however, there were no significant differences between treatments. As storage period was longer, shelf lifes of waxy corn in control and waxy corn treated with blanching were more shortened when waxy corn was stored at $15,5^{\circ}C$ before Retort, while waxy corn with boiling treatment was not significantly different compared with that in storage in freezer.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.5
• /
• pp.543-551
• /
• 1993

This study was designed to observe the effects of the feeding mixed with the sardine oil containing n-3 EPA, DHA and the safflower oil in which rich n-6 linoleic acid on the improvement of the lipids and on the fatty acid matabolism of serum lipoprotein in the dietary hyperlipidemic rats. Experimental oils mixed with 16% butter(control group) and 8% butter+8% olive oil, 8% butter and various level of sardine and safflower oils were administered to the male rats of the Sprague Dawley for 4 weeks. Concentrations of total cholesterol in serum lipoproteins were highest in the LDL, followed by VLDL, HDL and chylomicron components. in the triglyceride concentrations, chylomicron were highest, and much VLDL, LDL, HDL components. There were highest in the HDL, followed by LDL, VLDL and chylomicron in phospholipid concentrations of serum lipoproteins. Concentrations of total cholesterol, triglyceride and phospholipid in serum lipoprotein were lower in the other groups than in the control groups, and particularly, lowest in the group 5(4% sardine oil+4% safflower oil). From this results, the feeding equal quantity mixed oil with n-3 PUFA rich sardine oil and n-6 PUFA rich safflower oil were effective on the improvement of the lipid composition in the serum lipoprotein. It might be due to the effects of appropriate rations of P/S, 0.85 and n-6/n-3P, 2.85 in the test lipids. In the fatty acid composition of serum lipoprotein, ratio of P/S and n-3/n-6P were influenced from the fatty acid compositions of the mixed test lipids. And EPA contents were higher in the chylomicron components.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.132-138
• /
• 2012

Existing network layer firewall security support is one that does not support the higher layer, the application layer of a vulnerable web application security. Under these circumstances, the vulnerability of web applications to be able to defend a Web Application Firewall is positioned as a solver to solve the important security issues of businesses spotlighted in the next generation of security systems, and a very active market in the market other than domestic is expected to be formed. However, Firewall Web has not yet proposed a standard which can be used to test the performance of the Web Application Firewall Web Application Firewall and select the products of trust hardly Companies in BMT conduct their own individual problems and the cost of performance testing technologies, there is a limit. In this study, practically usable BMT model was developed to evaluate the firewall vendor. Product ratings ISO / IEC 9126, eight product characteristics meet the performance and characteristics of a web application firewall entries are derived. This can relieve the burden on the need to be evaluated in its performance testing of Web firewall, and can enhance the competitiveness of domestic-related sectors, by restoring confidence in the product can reduce the dependence on foreign products.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.2
• /
• pp.171-181
• /
• 2020

Recently, free-formed construction technology is becoming a new measure of representing technological superiority and sociocultural ingenuity. However, the CNC processing technology utilizing the existing wood and iron form has limitations in terms of the manufacturing time and material cost. Therefore, in this study, the method and process of manufacturing free-formed EPS form using S-LOM-based 3D printing technology were suggested. Furthermore, through the mock-up test, a comparative analysis of the manufacturing time and precision with CNC milling technology was conducted. The results show that S-LOM-based 3D printing technology has reduced manufacturing time about 57.4% compared to CNC milling technology during the free-formed EPS form manufacturing process. In addition, compared to the design drawings, the maximum error value was 20.5mm, proving the applicability of S-LOM-based 3D printing technology. The results of this study are expected to contribute to the improvement of S-LOM method and the activation of S-LOM method by verifying the applicability of S-LOM-based 3D printing technology.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.3
• /
• pp.286-294
• /
• 1996

This experiment was conducted to determine the rice quality between slowlelease fertilizer(SRF) and conventional fertilizer (CF) with the amount of 100% and 80% under direct seeding on dry paddy field, respectively. In rice quality, the percentage of matured grain and immatured grain was higher in CF with machine transplanting than in SRF with direct seeding, and the less amount of fertilizer applied, the lower percentage of immatured grain was obtained. The percentage of carbohydrate showed the difference between CF and SRF, and higher at the level of 100% applicated than that of 80% application. The contents of fat and ash were higher in CF with less fertilizer, and there was no trend to different cultural methods but it was related to the amount of fertilizer in amylose content. The nitrogen and sodium content of milled rice was high in SRF under machine transplanting as well as direct seeding. Calcium and magnesium content showed high in direct seeding but there was not significantly difference between CF and SRF.