• Journal of the Korean GEO-environmental Society
• /
• v.18 no.7
• /
• pp.5-12
• /
• 2017

The surface of the tunnel lining issues various problems such as cracks due to the cold weather. It is necessary to reduce the recovery costs by means of developing new recovery techniques. However, the research on reducing the damage of road tunnel lining caused by cold weather has not actively been conducted. Hence, this paper analyzes the effectiveness of using insulating materials such as aerogel and heat insulating liquid in enhancing insulating capability. The results show that these materials are effective in reducing heat transfer, confirming damage reduction in cold weather.

• Journal of the Korean Geosynthetics Society
• /
• v.1 no.1
• /
• pp.53-61
• /
• 2002

Even though a lot of laboratory and field tests for asphalt pavements using geosynthetics have been conducted recently, any rational and systematic analysis for the economic efficiency of the asphalt pavement systems reinforced by using geosynthetics has not been proposed yet. In this study, the economic analysis considering the traffic characteristics for the glass fiber sheet reinforced asphalt pavement was performed using the Life Cycle Cost Analysis(LCCA) which is commonly used for the economic analysis technique. The economic efficiency for the glass fiber sheet reinforcement and the traffic characteristics was examined by applying the test results from the literature review to the economic analysis model.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.359-362
• /
• 2002

The increase in the number of PCS base station and repeater has increased the level of interference between PCS carriers. In this paper, interference of singular PCS repeater out-of-band noise power on mobile phone is analysed and compared with that of unified PCS repeater for multiple PCS carriers. It is shown that unified PCS repeater provide about 2∼3dB signal gain in comparison with conventional PCS repeater. As a result, the interference of out-of-band noise power on mobile phone is reduced. It is expected that PCS carriers are able to build an environmentally-friendly communications infrastructure and reduce the cost by using unified PCS revealer and apply it for the deployment of IMT-2000 network.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.192.2-192.2
• /
• 2012

위성시스템 소형화, 탑재체 수용증대, 발사비용절감, 탐사임무 효율화 등의 요구로 인하여, 위성 설계에 있어 경량화는 오랜 기간 진행되어온 연구 주제였다. 이러한 연구결과로서, 위성 구조체를 복합재료로 대신하기 위한 구조 경량화 연구와 적용이 성과를 거두었으며, 현재 위성체 프레임이나 전개형 안테나, 광학구조물 등에 경량 탄소섬유 강화 복합재료의 적용은 보편화되어 있다. 한편, 위성시스템에서 전력, 통신, 명령/데이터처리, 자세제어 및 관측기기의 각종 전자장비를 보호하는 하우징 구조물에는 여전히 금속재료가 광범하게 적용되고 있다. 특히, 알루미늄 합금은 하우징 재료로 널리 사용되는데, 강도, 강성, 열전달, 우주방사, 전기전도도 및 EMI 차폐특성과 더불어 가공성이 우수하다는 장점을 지닌 반면에, 금속재료로서 중량이 상당하여 위성 경량화 관점에서는 한계를 갖게 하는 단점이 있다. 전자장비에 부여된 전자기능 측면에서 보면, 하우징은 기생 구조물로서, 경량으로 제공될수록 전자장비 전체 무게에서 전자유닛만의 무게가 차지하는 전기전자기능비가 향상되고 위성 경량화에 크게 기여할 수 있다. 구조 경량화를 위하여 전자장비 하우징을 경량 복합재로 대체하여 설계 및 제작하였으며, 복합재 하우징의 강도, 강성, 열전달, 우주방사, 전기전도도 및 EMI 차폐를 검증할 수 있는 방법에 대하여 검토하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.1
• /
• pp.102-108
• /
• 2000

The comparative evaluation/analysis of the initiation technologies currently being used, and the advanced initiation technologies currently being developed lot the aerospace and defense applications was performed. The evaluation criteria used were the compliance, performance, reliability, safety, and cost. The results clearly indicate that there is no one single initiation technology that will satisfy entire spectrum of initiation system requirements. Each initiation system architecture would require different initiation technologies that will satisfy the overall system performance requirements. However, laser initiation, particularly, the laser diode initiation has been getting more attention in recent years. The laser diode initiation, for most part, eliminates EMI and ESD concerns. In addition, laser diode initiation system can also be designed into relatively small packages, are optically connected systems by very light weight cables, are relatively easily designed to meet variety of initiation system requirements. Due to the these compelling factors, laser diode initiation has potential of becoming common initiation systems for many different aerospace and defense application.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.2
• /
• pp.39-45
• /
• 2010

In the recent years, it is important to evaluate the durability and the reliability of the vehicle, aircraft, and structure. Especially, in case of the vehicle, the durability and reliability are tested by driving test after making prototype vehicles. However, these methods require many costs and efforts for the experiment are needed to react the defects of product. This problems can be settled by simulator which supplies the realistic environments. In this parer, four-axial road simulator with hydraulic power and driving program to operate are made up. The displacement road profile is realized by accelerometers. For the verification the real-vehicle experiment is executed and road profile obtained from the experiment is verified by four-axial road simulator.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.1
• /
• pp.102-107
• /
• 2005

This paper describes a new voltage sag-swell generator for the test of custom power devices such as UPS, DVR, DSTATCOM, SSTS, etc. Voltage sag, swell, outage, and unbalance generation mechanism and the operating principle are described for the proposed scheme. The usefulness of the scheme is proved through simulations and experiments. The proposed scheme has good features of simple structure, high reliability, wide range of sag and swell variation, and easy control. Especially, the scheme can provide a cost-effective implementation of a power quality disturbance generator. Therefore, it is expected that the scheme will contribute to the self implementation of the system with low cost in laboratory.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.6
• /
• pp.191-196
• /
• 2004

The measurement method is proposed for performance-evaluation of bus system in this paper. The cycle tin in manufacturing system that sensor and actuator play on the role is important factor for performance-evaluation. In order to measure cycle time, proposed method is based on simple algorithm. But it must consider delay elements in PLC and it's peripheral. The test of the cycle time is divided into the best case and the worst case and parameters are set corresponding to two cases for the improvement of measurement result It is shown that the proposed method is efficient by measuring the cycle time of the fieldbus basing on the mathematics model. As a result, due to simplicity and convenience of proposed method, the engineering cost and time demanding for test of cycling time can much reduce.

• Fire Science and Engineering
• /
• v.25 no.2
• /
• pp.80-87
• /
• 2011

On the result of load-bearing fire test to confirm the fire resistance of a composit beam, if the composit beam has lower fire resistance than required standard, it can be improved by section change. But if there are many types of section change, it takes much time and cost owing to conducting many tests. On this study, it was confirmed which part of the asymmetric H-section composit beam affected most on fire resistance by heat-transfer analysis. Then, we checked the tendency of improving fire resistance depend on section change by heat-transfer and non-linear structural analysis and suggested a changed section having 1-hour fire resistance.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.73-73
• /
• 2015

자연 하천의 홍수 유량 측정은 매우 어렵고 많은 비용과 시간, 노력을 요하는 작업이다. 보다 안전하고 경제적인 유량 측정의 대안으로 제시된 것이 하천 표면의 영상 분석을 이용하는 표면영 상유속계이다. 본 연구는 안드로이드 기반의 스마트폰을 이용한 실시간 표면영상유속계를 개발하는 것이다. 스마트폰에 내장된 카메라, GPS, 방향 센서, CPU를 활용하여, 실시간으로 현장에서 하천의 표면유속을 측정하는 것이다. 먼저, 스마트폰의 GPS를 이용하여 측정 현장의 위치를 잡고, 경사계(방향 센서)를 활용하여 카메라와 촬영면의 기하적인 관계를 설정한다. 수표면과 카메라의 높이차만을 입력하고, 측정된 카메라의 경사에서 하천 수표면의 위치관계를 추정할 수 있는 카메라 모형을 작성하였다. 이 방법을 이용함으로써 기존 표면영상유속계의 단점 중 하나인 참조점 보정이 필요없도록 하였다. 내장된 카메라로 정해진 시간(3초) 동안 동영상을 촬영하고, 촬영된 동영상은 개방 소스의 영상처리 라이브러리인 JavaCV를 이용하여 프레임별로 분할하고, 이를 시공간 영상 분석하여 하천 표면의 2차원 유속장을 추정한다. 영상의 시공간 분석에는 상호상관 시공간분석법을 이용하였다. 모든 코드는 안드로이드 운영체제에서 실행되도록 Java로 작성하였다. 시판되는 안드로이드 스마트폰에 적용하여 현장 시험한 결과 3초간의 영상 처리에 5초 정도를 소요하여, 거의 실시간으로 유속을 측정할 수 있었다. 또한 유속 측정 오차는 일반적인 영상 처리의 오차인 5% 내외였다.