• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.108-109
• /
• 2023

The purpose of this study is to set a policy that can be specifically promoted according to the recently announced domestic equipment industry fostering strategy, and to suggest a plan that can be implemented. As a plan to foster the equipment industry, a new technology certification system and a new technology test and verification area operation and vitalization plan were set as alternatives. And a survey was conducted on companies conducting R&D to derive specific demand and introduction plans. As a result of the survey, it was found that there was a high demand for the use of new technology certification systems and testing and verification area. Also demonstration in connection with port equipment, testing and evaluation in connection with accredited verification agency, and preparation of dedicated agencies were derived to foster the equipment industry. Based on this, this study suggests a new technology certification system specialized for port equipment was established and a plan to institutionalize. In addition, in connection with the survey results and certification system, the basic functions and roles of the new technology testing and verification area was established. For future activation, incentives with effective certificates such as exemption of certification costs and issuance of performance confirmation certificates are needed, and efficient operation and management through dedicated organization and certification center were suggested.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.2
• /
• pp.293-300
• /
• 2012

This study was to investigate the unsuitable rate of the storage facilities, the changes in corrosion process over time after installation according to the status, the time to install the facilities, years elapsed after facilities installation, inspection of methods and motivation, and so on, based on the results of the inspection at the petroleum storage facilities conducted by domestic soil-relate specialized agency to derive optimal management plans which meet the status of soil contamination facilities. The results showed that the facilities more than 5 years after the initial leak test at the time of the installation need to be inspected periodically by considering costs of leak test and remediation of polluted soil. The inspection period can be decided by cost and leak test methods showing discrepancies for the results obtained from individual test whether it was direct or indirect. To compensate these matters, we suggested that the direct inspection method on regular schedule is recommended. On the other hand, the inspection can be voluntarily completed to ease burden of the results by inspection or equivalent level to this inspection method. Also, it may need improved construction supervision and performance test system to minimize the occurrence of the nature defects in installing the facilities as well as the upgrade program for the facilities during intervals of inspection period.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.37-43
• /
• 2018

A developer solves problems with isolating failures if faults are detected when inspecting missiles using the missile assembly test set (MATS) and then resumes the testing. In order to identify faults, it is necessary to analyze the data coming from the equipment, but the information received may not be sufficient, depending on the inspection environment. In this case, the developer repeats the test until the problem is reproduced or checks the performance of each piece of equipment that is related to the fault. When this task is added, schedule management becomes problematic, and development costs rise. To solve this problem, we need to design a MATS in a systematic way to increase fault coverage while satisfying the required reliability. By designing the necessary processes for each procedure, it is possible to reduce the fault identification time when a fault is detected during operations. But it is not possible to guarantee 100% fault coverage, so we provide another method by comparing costs and effects. This paper describes a development method to enhance the reliability of the missile assembly test set; it describes the expected effects when it is adapted, and describes the limitations of this method.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.27-27
• /
• 2010

청정에너지원의 수요가 증가함에 따라 에너지원의 공급로의 역할을 하는 강관의 수요가 증가하고 있다. 소재가공 기술의 발전과 함께 경량의 고장력 강재의 적용은 공급로의 역할을 하는 강관의 비용절감 및 자원의 효율적 이용 측면에서 지속적으로 연구 개발을 이어왔다. 이러한 추세에 따라 구조용 또는 라인파이프용 강관에서도 고장력 강재의 적용과 함께 고인성 그리고 용접성의 향상을 위한 다양한 라인파이프용 강재의 개발과 이의 적용이 그간 활발히 진행되어왔다. 용도상 반드시 필요한 특성인 고장력, 고인성, 용접성 등 외에도 다양한 강재의 사용에 따른 제조공정상 즉 용접공정에서 발생될 수 있는 용접부의 기계적 특성 변화에 대한 특성 연구 및 기술 연구가 계속 되어왔다. 주로 강관을 생산하는데 쓰이는 ERW (Electric Resistance Welding) 공정에서도 이러한 문제점을 해결하기 위해 많은 연구가 진행되고 있다. ERW는 높은 생산성과 낮은 제조비용의 장점을 가지고 있으나 용접 후 용접부의 기계적 특성 감소로 인한 단점이 있다. 때문에 기계적 특성향상을 위해 최적의 용접조건에 대해 연구해야 할 필요가 있다. 본 연구에서는 4가지 합금강관의 ERW 용접시 용접 입열량의 변화와 용접부의 후열처리를 통한 미세조직의 변화와 기계적 특성에 대해서 고찰하였다. 4강종 시편의 미세조직을 OM, SEM을 통한 분석 이후 인장시험 및 경도시험 등을 통해 기계적 특성을 평가하였다. 대부분의 시편에서 입열량의 증가에 따라 Ferrite 분율이 증가하였고 용접중앙부의 Ferrite 양이 용접경계부 보다 많았다. Ferrite 집중부의 분포가 극명하게 관찰되었던 DP780 (적정) 강종과 미세하게나마 Ferrite 집중부가 존재하였던 K55 (과소, 과대) 강종에서 나란히 경도 하락 현상이 관찰되었다. 이는 강종마다 고유의 Ceq, 합금 중 Mn 농도, 입열량 등에 의한 복합적인 이유 때문으로 판단된다. 탄소가 0.3~0.4 wt% 함유된 중탄소강인 S45C, K55의 경우 용접중앙부와 용접경계부의 페라이트 분율 차이가 큰 것을 알 수 있었다. 이는 용접시 열에 의한 탈탄현상으로 인해 나타나는 현상으로 판단된다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.969-972
• /
• 2015

Many studies have been carried out in order to develop a frequency efficient communication system than the current communication system for satisfying the increasing demands of wireless data services in mobile communication systems. If a communication system dramatically improving the frequency utilization efficiency is not developed, service providers must maintain more number of base station equipments to meet the increasing demands of wireless data service. Service provider needs a system or method to reduce maintenance costs. Demands of wireless data service are changed according to time of day, location and so on. Power consumption can be reduced if the supplied power of communication systems is controlled by wireless data traffics. This paper describes the design and implementation of power management system of mobile communication base station's equipment based on smart grid. The proposed power management system controls the supplied power to the mobile communication infrastructures depending on the demand of wireless data. Field test results of the implemented system show the proposed system saves 26% of the power consumption in the base stations.

• Korean Journal of Soil Science and Fertilizer
• /
• v.10 no.2
• /
• pp.79-84
• /
• 1977

In order to confirm the effect of potash top dressing and to observe the effect of N, K compound fertilizers, 17-0-17, 17-0-14, and 15-0-20, specially prepared for top dressing to rice, a field experiment with rice (Oryza Sativa L., Akibare) was conducted in a poorly drained paddy field in comparison with potassium chloride. The results obtained are as follows, 1. The effect of potash top dressing to rice was so remarkable that the yield from the plots of split application of muliate potassium or compound fertilizer was significantly higher than that from the plot received no potash at all. In contrast, the plots received all the amount of potash as one dose at transplanting time showed no significant increase in yield compared with that of potash plot. 2, The effect of N, K compound fertilizer, granulated to about the size of a small bean appeared to be so slow that it gave little increase of yield when it was appiled as a top dressing at the primodial stage, but it gave an increase of yield when it was top dressed at effective tillering stage. 3, Granular N, K compound fertilizer to be top dressed at primodial stage might be prepared in small size so that the fertilizer readily go into solution when it was applied, otherwise the fertilizer should be applied eariler than the primodial stage.

• Journal of the Korea Society for Simulation
• /
• v.28 no.3
• /
• pp.41-48
• /
• 2019

In modern-war campaign, precision-guided missiles are dominantly used to minimize the collateral damage. Imaging infrared seekers are widely applied for the precise guidance. Due to the high cost of the infrared detector, the cost for the one-shot weapon's test is a burden for the development. To reduce the test cost, a simulation method including imagery tracking is required, which is so-called integrated-flight simulation(IFS). The synthetic image generation(SIG)-based simulation method is typically used, which however cannot represent various environmental and target conditions. In this paper, a new IFS method is proposed using on-sight measured image to overcome the limitations of the SIG-based IFS(SIIFS). The target image acquired at the launching sight has been used only for checking the performance criteria of the image tracker and has not been tried for IFS since it has low resolution and little information. The study described in this paper, however, shows that the on-sight image-based IFS can predict the pre- and mid-course flight performance quite similarly and is very useful for the flight test analysis.

• Korean Journal of Cognitive Science
• /
• v.28 no.4
• /
• pp.315-328
• /
• 2017

Even though assessment using information and communication technology will most likely lead the future of educational assessment, there is little domestic research on this topic. Computerized assessment will not only cut costs but also measure students' performance in ways not possible before. In this context, this study introduces a tool which can overcome the problems of multiple choice tests, which are most widely used type of assessment in current Korean educational setting. Multiple-choice tests, in which options are presented with the questions, are efficient in that grading can be automated; however, they allow for students who don't know the answer, to find the correct answer from the options. Park(2005) has developed a modified multiple-choice testing system (CMMT) using the interactivity of computers, that presents questions first, and options later for a short time when the student requests for them. The present study was conducted to find out if penalizing wrong answers could lower the possibility of students choosing an answer among the options when they don't know the correct answer. 116 students were tested with the directions that they will be penalized for wrong answers, but not for no response. There were 4 experimental conditions: 2 conditions of high or low percentage of penalizing, each in traditional multiple-choice or CMMT format. The results were analyzed using a two-way ANOVA for the number of no response, the test score and self-report score. Analysis showed that the number of no response was significantly higher for the CMMT format and that test scores were significantly lower when the penalizing percentage was high. The possibility of applying CMMT format tests while penalizing wrong answers in actual testing settings was addressed. In addition, the need for further research in the cognitive sciences to develop computerized assessment tools, was discussed.

• Research in Plant Disease
• /
• v.16 no.3
• /
• pp.285-289
• /
• 2010

The experiments were carried out in fields for two years from 2008 to assess yield losses of squash due to powdery mildew caused by Sphaerotheca fuliginea and to determine its economic thresholds. Powdery mildew disease was first observed in late June, about 50 days after field-transplanting, progressed rapidly during late July to early August, and began to reduce from late August. Powdery mildew severity was negatively correlated with squash yields. A positive correlation was observed between fruit weight and % marketable fruits. A simple linear regression model was obtained as Y=-10.399 X + 6607.5 with $R^2$ = 0.9700 when squash yields (Y) was predicted using powdery mildew severity as an independent variable(X). Spray threshold for maximizing squash yields without economic considerations was estimated as 6.5% in terms of leaf lesion area with powdery mildew. Economic threshold and economic spray threshold able to compensate the costs of fungicide sprays were determined as 21.6% and 17.3% in leaf lesion area, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.10
• /
• pp.1488-1492
• /
• 2011

This study was carried out to evaluate the effects of hydrocolloids such as arabic gum, carboxymethylcellulose (CMC), and pectin on the quality and sensory properties of frozen-par baked baguettes according to frozen storage periods. Exactly 0.2 and 0.5% hydrocolloids were added to the baguettes based on flour. Specific loaf volume, hardness, moisture content, and sensory evaluation of baguettes were analyzed. Specific loaf volume of baguette with added 0.2% CMC was the highest after 3 weeks of storage at $-18^{\circ}C$. Moisture contents were not significantly different between control and experimental baguettes. In terms of hardness, baguette with added 0.2% pectin had the lowest value after 3 weeks of storage at $-18^{\circ}C$. In sensory evaluation, baguette with 0.2% pectin among hydrocolloids had the highest score for external and internal properties, as well as total acceptance. Consequently, 0.2% pectin increased the quality of baguette.