• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.531-542
• /
• 2017

The structural safety of small craft, such as steel ships and FRP ships, can be estimated using the measurement test of the hull plate thickness or the longitudinal bending strength test. A polyethylene boat is made using inexpensive HDPE and can be mass produced. The structural safety of a polyethylene boat cannot be guaranteed because a polyethylene boat hull is notspecified in the KR technical rules. The inspection procedure of sailing yachts and pleasure boats and drop test method of ISO standard 12215-5 propose the structural strength required for small crafts as the drop test height. Therefore, in this study, the drop test of a polyethylene boat hull was carried out based on the inspection procedure of a sailing yacht and pleasure boat and the drop test method of ISO standard 12215-5. The drop load was acquired by the drop acceleration ofa boat hull. Structural analysis and safety of a polyethylene boat were performed by the drop load and allowable stress criteria. The calculation results of the hull plate thickness by structural design specification of ISO standard 12215-5 showed that polyethylene boat hull was more than two times thicker than a steel ship hull and the boat hull determined by the inspection procedure of sailing yacht and pleasure boat and drop test method of ISO standard 12215-5 was more than 1.2 times thicker than the boat hull determined by structural design specification of ISO standard 12215-5. Therefore, inspection procedure of sailing yachts and pleasure boats and drop test method of ISO standard 12215-5 was much more conservative than the structural design specification of ISO standard 12215-5 and could be used as the structural design method of a polyethylene boat.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.1
• /
• pp.163-170
• /
• 2019

In recent years, various types of industrial wastes are rapidly increasing with the development of high-tech industries. Specially, high-density waste glass of CRT TV containing heavy metals are buried or disposed of due to reprocessing costs and environmental pollution problems. Thus, more basic research is needed to recycle waste such as CRT waste glass such. In this study, the fundamental properties and radiation shielding performance of mortar specimens substituted CRT waste glass as a fine aggregate were analyzed and their application to shielding materials was evaluated. According to the results, the bulk density of mortar specimen replaced with CRT waste glass was increased and the compressive strength and flexural strength were decreased. Meanwhile, the CRT waste glass substitute specimen containing a large amount of lead component showed a higher shielding performance than the general mortar specimen. Especially, the linear attenuation coefficient of CRT waste glass in $122KeV{\cdot}^{57}Co$ of the low energy field was 2.5 times higher than that of normal specimen.

• Journal of the Korean Geosynthetics Society
• /
• v.6 no.4
• /
• pp.29-37
• /
• 2007

Reduction Factor for Installation Damage required for calculation of design strength of geogrid used in MSEW(mechanically stabilized earth wall) design is usually obtained in the field test simulating real construction condition. However, damages occurred in geogrid during backfill work are influenced by many factors such as polymer types, unit weight per area, backfill construction method and gradation of backfill material and field test considering these factors demands lots of time and costs. In this study, factors affecting installation damage are analyzed and empirical method for evaluating reduction factor for installation damage using maximum particle size in backfill material is suggested.

• Aerospace Engineering and Technology
• /
• v.13 no.2
• /
• pp.73-79
• /
• 2014

During developing cubesat flight software, Communication test between cubesat and ground station is needed. For this, we have constructed indoor ground station without outdoor antenna for decreasing total cost and time. In this time, if output power of ground station is high, it will affect for cubesat transceiver to be fail. For solving this problem, ground station must be designed for output power of it to be lower than input power of cubesat satellite, and it must be verified. In this paper, first, we describe cubesat indoor ground station using UHF and VHF. Second, we describe output power decreasing test for indoor operation of ground station by attaching attenuators in the end of the output connector.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2A
• /
• pp.51-58
• /
• 2011

The objective of this research aims at improving the structural and economical efficiency of small and medium-span reinforced concrete bridge slab with the Inverted-T girders (hereinafter, called as IT). This IT method has an advantage over minimizing the construction process which could cause environmental pollution and traffic congestion. Especially it is thought that this new composite bridge slab with IT girders has better aesthetic view and visibility than existing old bridges, and is also a good methodology to solve labor shortage problems due to coming aging society. Therefore, this IT method should be one of very effective construction technologies to improve the constructibility and to reduce the construction cost.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.14-20
• /
• 2014

This study, the reliability of weapon systems acquisition and research and development in order to increase the effect of the modeling and simulation method has been studied using computational fluid dynamics. Weapon system acquisition, Test & Evaluation for use in the modeling and simulation can reduce the reliability of the time and cost savings and possible predictions and verification, and can provide useful data. However, the current weapon system acquisition and active use of modeling and simulation and verification do not even use the software are restricted. In this study, using computational fluid dynamics (CFD) modeling and simulation using the GAMBIT and FLUENT modeling and simulation was performed. The result is better than previous research results were confirmed in future weapon systems acquisition and research and development are expected to be actively used.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.168-175
• /
• 2005

The pressurization system in a liquid rocket propulsion system provides a controlled gas pressure in the ullage space of the vehicle propellant tanks. It is advantage to employ a hot gas heat exchanger in the pressurization system to increase the specific volume of the pressurant and thereby reduce over-all system weight. A significant improvement in pressurization-system performance can be achieved, particularly in a cryogenic system, where the gas supply is stored inside the cryogenic propellant tank. The temperature characteristic of cryogenic pressurant is very important to develop some components in pressurization system. Numerical modeling and Test data were studied using SINDA/FLUINT Program and PTF(Propellant-feeding Test Facility).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.2
• /
• pp.179-188
• /
• 2015

Testing a radar system in real environment requires a lot of time and cost. Thus various target simulators are developed to evaluate the radar performance and its functions as well. In order to enhance the range resolution and the accuracy for tracking, recent radar system tends to use the wideband signal. In this paper, we summarize two target simulation methods - the direct sampling method with the digital memories and the beat frequency generation for the stretch processing - and suggest the condition to improve their performance for a wideband radar system.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.169-171
• /
• 2008

초전도케이블의 기술적 경제적 타당성에 대한 논의가 계속 진행되고 있는 가운데 이를 검증하기 위한 실계통 시험이 미국, 중국 및 일본을 포함한 주요 선진국들에서 이루어지고 있다. (1) 대용량 송전 및 절연성능 측면에서 장점을 가지고 있는 초전도케이블이 실제계통에서 적용한 예가 지금까지 많지 않은 이유는 막대한 초기투자 비용과 함께 신기술 도입에 따른 기술적 신뢰성 확보를 꼽을 수 있다. 특히 케이블 자체의 전기적 특성과 함께 냉각시스템의 신뢰성은 초전도케이블 기술의 상용화를 위해서 반드시 확보되어야 하며 냉각시스템의 고효율와 함께 장기운전에 따른 냉각시스템의 안정성 및 기기적 특징들이 우선적으로 파악되어야 할 것이다. 본 논문에서는 냉각시스템의 신뢰성을 검증하기 위한 실험의 일환으로 전류와 냉각시스템에 내장되어 있는 히터를 이용하여 열부하를 동시에 인가, 냉각시스템의 냉각용량 과부하 상태를 모의하여 냉각시스템의 반응성을 평가하였다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.444-446
• /
• 2011

3상3선식 2소자 계량방식을 적용하고 있는 154kV 3상4선식 중성점 접지 고압 고객은 상 불평형시 계량오차가 발생하게 된다. 상 불평형시의 3상4선식 정상 계량방식과 3상3선식 계량방식의 계량오차에 대한 기 공개된 시험분석 자료를 기반으로 하여 본 논문에서는 3상4선식 공급선로에서 2소자 계량을 적용하고 있는 3상4선식 고객에 대하여 전력계량의 신뢰도 향상을 위해 제안된 기존의 3상4선식 전력량계를 활용하여 계량 환경을 개선하는 시공기술로서, 설비개선 비용이 거의 소요되지도 않고 무정전 시공과 함께 전력량계의 제작사양을 변경하지 않는 방법으로 계량 정밀도를 개선 할 수 있는 방안에 대한 검증시험과 적용성 분석 등의 개선대책에 대하여 기술한다.