• Korean Journal of Optics and Photonics
• /
• v.23 no.4
• /
• pp.147-153
• /
• 2012

Multi-view 3D displays based on a limited number of pixels have the problem that the stereo-scopic image has a low resolution because of increasing view number. To solve the problem of low resolution, we propose an optical approaching method that focuses the width of a unit pixel by using a commercial spherical shape lenticular lens sheet and increases the effective resolution by increasing the number of sources of light in the multi-view 3D display system based on projection type. The method was performed in such an order that several main derivable parameters were defined, and, through the theoretical and experimental result, the value of the contractible unit pixel width and the scalable effective resolution was derived in a given system environment. As a result, for the case that the ray of light from the projector transmitted the 25 LPI lenticular lens sheet which has the pitch size 1.016 mm, the focused unit pixel width was 0.19 mm and the scalable effective resolution was, at most, 5 times wider than the original one. In addition, the range of depth of focus was 1.496 mm, which shows us the range of thickness tolerances of commercial spherical shape lenticular lens sheet and sufficient optical alignment tolerances.

• Korean Chemical Engineering Research
• /
• v.50 no.1
• /
• pp.173-176
• /
• 2012

Chlorine dioxide has an excellent ability to sterilize and deodorize and is harmless to humans. However, it is very unstable and explosive as it is highly concentrated, thus its use in the air clean filed has been limited. Therefore, there is a demand to develop the system to produce a low concentration of chlorine dioxide sustainedly. Here, for a first step in the development of the system on the sustained production of chlorine dioxide, the use of polymer hydrogels was investigated. P(MMA-co-HEMA) hydrogel particles were prepared via dispersion photopolymerization and sodium chlorite and citric acid were loaded respectively in the hydrogel particles. When sodium chlorite and citric acid were reacted with not loaded in the hydrogels, rapid production of chlorine dioxide occurred and the concentration of chlorine dioxide decreased over time. However, when sodium chlorite and citric acid were loaded respectively in the hydrogel particles and reacted, chlorine dioxide was produced slowly and sustainedly because the release of sodium chlorite and citric acid from the hydrogels delayed the reaction between them. The result shows that the use of P(MMA-co HEMA) hydrogels has the potential to develop the system on the sustained production of chlorine dioxide.

• Journal of Korea Port Economic Association
• /
• v.32 no.3
• /
• pp.67-81
• /
• 2016

This paper examines the influence of Brexit on container volume of Korea, especially of macroeconomic variables such as exchange rate and industrial production of EU and United Kingdom. To do this, we use monthly time series data during 2000-2016, and introduce the analysis method of cointegration test and VECM, and analyze the influence of industrial production and exchange rate of EU and U.K. on container volume of Korea. The results are as follows. First, the container volume of Korea is influenced by the exchange rate and industrial production of EU in the long run. But the exchange and industrial production of U.K. influenced on only export container volume of Korea, and the influence of U.K. macroeconomic variables on container volume of Korea was not large in the long lun. Second, In the shot run, the influence of exchange rate on container volume of Korea, especially on export container volume was significant in EU and U.K. To sum up, the influence of EU macroeconomic variables on container volume of Korea is larger than that of U.K., and the influence of exchange rate variable is more significant than that of industrial production variable.

• Journal of The Korean Association of Information Education
• /
• v.25 no.3
• /
• pp.459-469
• /
• 2021

In this paper, a case study of basic data science practice education for field teachers and pre-service teachers was studied. In this paper, for basic data science education, spreadsheet software was used as a data collection and analysis tool. After that, we trained on statistics for data processing, predictive hypothesis, and predictive model verification. In addition, an educational case for collecting and processing thousands of public big data and verifying the population prediction hypothesis and prediction model was proposed. A 34-hour, 17-week curriculum using a spreadsheet tool was presented with the contents of such basic education in data science. As a tool for data collection, processing, and analysis, unlike Python, spreadsheets do not have the burden of learning program- ming languages and data structures, and have the advantage of visually learning theories of processing and anal- ysis of qualitative and quantitative data. As a result of this educational case study, three predictive hypothesis test cases were presented and analyzed. First, quantitative public data were collected to verify the hypothesis of predicting the difference in the mean value for each group of the population. Second, by collecting qualitative public data, the hypothesis of predicting the association within the qualitative data of the population was verified. Third, by collecting quantitative public data, the regression prediction model was verified according to the hypothesis of correlation prediction within the quantitative data of the population. And through the satisfaction analysis of pre-service and field teachers, the effectiveness of this education case in data science education was analyzed.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.360-361
• /
• 2003

토목합성재료(geosynthetics)의 일종인 지오그리드(geogrids) 제품은 1979년 영국에서 개발된 이래 세계적으로 그 적용 용도와 수요가 지속적으로 증가하고 있는 토목합성 보강재이다. 일반적으로 지오그리드는 올레핀계 수지를 시트 상으로 압출하여 천공 및 연신하여 제조하는 플라스틱 타입 지오그리드와 고탄성 고강력 섬유로 제직 혹은 제편하고 이를 수지로 코팅하여 제조하는 텍스타일 타입 지오그리드의 두 가지로 분류된다. (중략)

• Journal of the Korea Convergence Society
• /
• v.11 no.1
• /
• pp.169-174
• /
• 2020

Side bolster is a part of the vehicle seat that holds the passenger's body from the side to make it more stable when the passenger is seated in the seat. In this study, the structural and fatigue analyses of the side bolsters at a car seat were carried out with two models of A and B. The heavily loaded parts, the damage by fatigue at driving a car and the difference of durability due to the structure were examined and the distributions of stress and deformation, and the fatigue lives were seen. Also, the strength and durability were examined. This study result is thought to be devoted to decrease the fatigue damage and increase the fatigue life and durability according to the design of bolster. This result is able to improve the product by applying the design of automotive side bolster practically. And it is thought to be the advantage to apply this study result to the convergence research with esthetic sense.

• Elastomers and Composites
• /
• v.49 no.4
• /
• pp.275-283
• /
• 2014

Butyl rubber is used as an adhesive and it is mainly used in the form of sheets. The goal of this study is to design an extrusion die for the butyl rubber sheets using computer simulation. The extrusion die for the butylrubber sheets consists of manifold area and land area. In the manifold area, flows are spread from the entrance of the extrusion die to the land area. In the land area, flows become stable to the flow direction and uniform sheet can be obtained. Island area is being installed in the land area to get uniform flow. Four parameters, angle of manifold, length of manifold, length of land and island, were examined in the computer simulation. The optimum geometry of the extrusion die is derived which has a uniform flow in the width direction of the die.

• Elastomers and Composites
• /
• v.41 no.2
• /
• pp.125-130
• /
• 2006

To understand the effect of midsole on the bending stiffness of footwear, bending moment is studied with various hardness and thickness of polyurethane(PU) and poly(ethyl one-co-vinylacetate)(EVA) foams which composed in footwear midsole. The initial bending moment of footwear was appeared at $19^{\circ}$ on bending angle of footwear, and this bending angle was not depend on thickness and hardness of midsole. The bending moments of footwear were also increased with increase of the hardness and thickness of misole which were composed in footwear. Increased hardness and increased thickness of foam and midsole also cause a greater bending moment of the sports shoe, respectively.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.4
• /
• pp.97-106
• /
• 2019

This study was conducted to propose a reasonable requirement regulation of barrier system of rubble mound revetment offshore landfill for preventing contaminant leakage. The barrier is composed with bottom layer and side barrier. The bottom layer was assumed as impermeable clay layer and side barrier was composed with HDPE sheet (primary element) and mid-protection layer (supplementary element). Seepage-advection-dispersion numerical analysis has been conducted using SEEP/W and CTRAN/W programs under steady flow. As the results, the minimum required barrier regulations for hydraulic conductivity and thickness of the bottom layer were suggested. For side barrier, the extended length of HDPE sheet and the hydraulic conductivity of mid-protection layer were also suggested.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.11a
• /
• pp.21-25
• /
• 2008

In this paper, the temperature history and the strength development of concrete corresponded to various bubble sheets layer and curing temperature. Based on the results, In case of the test temperature of -5℃, concrete subject in the exposure condition, result in a frost damage at initial stage by a fall of below zero temperature. In case of the combination of PE film and non woven fabric was after 36 hour, and combination of bubble sheet over double, a tremendous insulating effect of bubble sheet over double is confirmed due to the temperature of concrete fall of below zero temperature after 60 hours. Meanwhile, regarding the -15℃ of temperature, special measure for insulation curing is necessary to secure stability against early frost damage because frost damage was not affected by the lapping thickness of bubble sheet subjected to severe cold weather condition.