• Fire Science and Engineering
• /
• v.14 no.3
• /
• pp.27-32
• /
• 2000

The assessment of wildland fire hazard is the first priority to be considered in the prevention, extinction and control of wildland fire. For the standard to measure wildland fire hazard, the wildland fire Warning System is currently being used in Korea which computes the wildland fire occurrence hazard index through a stick weight to moisture conversion formula. It shows the risk of fuel substance being exposed to fire by meteorological factors. For a comprehensive assessment of wildland fire hazards by area, the major factors'hazards need to be measured and the assessment of wildland fire needs to be conducted through historical statistic examination. Therefore, the wildland (ire outbreak frequency and its seriousness of damage are analyzed through historical statistic examination to conduct the assessment of a wildland fire hazard, and then the calorific value of a forest is analyzed through differential scanning calorimeter measurement which assesses the comparative calorific hazard according to the geographical distribution of vegetation.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.2
• /
• pp.59-65
• /
• 2018

We conducted an isothermal slow cook-off(ISCO) test for an aluminized explosive containing AP. The sample bulged before the run-away reaction, and therefore we were unable to obtain the ISCO data. However, these phenomena did not occur for a certain AP grade, which means that the quality of the AP exerted a significant effect on the thermal stability of the explosive formulation. In this study, we investigated the thermal stability difference between a good and bad AP grade. First, we characterized the thermal properties of all APs by Differential Scanning Calorimeter(DSC) and correlated them to the ISCO phenomena. In addition to the DSC study and ISCO test, we also investigated and calculated the SADT and self-heating rate by the ARC of the different AP qualities to interpret the thermal stability of the explosive formulation. Moreover, we investigated the impurity of the AP and a preparation method to remove the included impurity and crystallization. Finally, we implemented qualification methods to identify the quality of AP by DSC using a high-pressure crucible.

• Polymer(Korea)
• /
• v.34 no.6
• /
• pp.495-500
• /
• 2010

Crosslinked PI films were synthesized from 4,4'-(hexafluoro isopropylidene)diphthalic anhydride (6FDA) and bis[4-(3-aminophenoxy) phenyl] sulfone(BAPS) with various ratios of the reactive monomer cis-4-cyclohexene-1,2-dicarboxylic anhydride(CDBA). We prepared crosslinked poly(amic acid) (PAA) using a 0.1 wt% Grubbs catalyst as a crosslinking agent. The crosslinked PAA was heat-treated at different temperatures to give PI films. The thermo-mechanical properties and optical transparency of the PI films were investigated. The thermal properties of the PI films were examined using Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry(DSC), thermogravimetric analysis(TGA), thermo-mechanical analysis(TMA), and universal tensile machine(UTM), and their optical transparencies were investigated using UV-vis. spectrophotometry. The thermomechanical properties of the PI films improved with increasing CDBA content. However, the optical transparency of the PI films decreased slightly with increasing CDBA content.

• Polymer(Korea)
• /
• v.38 no.6
• /
• pp.714-719
• /
• 2014

Bio-based nylon 6-morpholinone random copolymers were prepared by the anionic ring opening polymerization of ${\varepsilon}$-caprolactam and morpholinone, both of which were prepared from lysine and glucose, respectively. From this work, a new biomass based nylon 6 with improved hydrophilicity was prepared. Optimizing the polymerization condition, copolymer with a viscosity-average molecular weight of 30000 g/mol was prepared, with a yield of 80%. It was possible to improve the hydrophilicity of nylon 6 by its copolymerization with morpholinone. The prepared nylon 6-morpholinone random copolymers were then characterized using several analytical methods such as DSC, TGA, XRD, viscosity measurement with U-shaped glass capillary viscometer and contact angle measurement.

• Journal of the Society of Disaster Information
• /
• v.10 no.1
• /
• pp.71-83
• /
• 2014

This study carried out an experiment in order to compare thermal characteristics after collecting dust generated in the process of disposing of waste tire, plywood flour in the process of manufacturing plywood, salicylic acid dust in the process of manufacturing functional soap, and dust in the process of manufacturing wheat powder, which has potential fire and explosion hazard. According to the results of experiment, the analysis showed that all samples subject to the experiment were in the condition where heat flux decreased and temperature decreased as the quantity of added talc was increased. This shows that decomposition rate decreased, and hazard decreased. However, in all of samples subject to the experiment, as heating rate increased, endothermic onset temperature moved to the low-temperature part, and the amount of absorbed heat was largely increased. This showed that the decomposition hazard of sample increased as heating rate increased, according to the analysis. Besides, TGA experiment results showed that thermal stability was secured because total weight loss decreased as the amount of talc was increased for all samples subject to the experiment regarding the ratio of weight loss. It is expected that the continuous research and supplementation of dust explosion mechanism in the future will contribute to the establishment of measures for the effective dust explosion prevention.

• Polymer(Korea)
• /
• v.29 no.4
• /
• pp.369-374
• /
• 2005

In this work, the calcium alginate microcapsules containing lemon oil were prepared by emulsification-internal gelation and their potential use as aromatherapy was examined by the controlled release system. The lemon oil encapsulated in the alginate was successfully observed by Fourier transform (FT-IR) spectroscopy and differential scanning calorimeter (DSC) measurements. Analysis of the diameters and shapes of microcapsules was conducted by scanning electron microscopy (SEM). The mean diameters ranging from 4 to 7 um and encapsulation yield ranging from 50 to $85\%$ were obtained. The controlled release of the lemon oil at $37^{circ}$ was demonstrated by the infrared moisture determination (IMDB). It was found that the amount of released lemon oil decreased with increasing concentrations of alginate and $CaCl_2$ due to the higher the cross-linking density of the capsules prepared. The oil release from the capsule was measured as a function of physical force. We confirmed that the external factor could control the collapse of capsule wall and the release rate.

• Polymer(Korea)
• /
• v.28 no.4
• /
• pp.344-351
• /
• 2004

Poly(ethylene glycol)-based diblock and triblock polyester copolymers stimulating to temperature were studied as injectable biomaterials in drug delivery system because of their nontoxicity, biocompatibility and biodegradability. We synthesized the diblock copolymers consisting of methoxy poly(ethylene glycol) (MPEG) (M$_{n}$=750 g/mole) and poly($\varepsilon$-caprolactone) (PCL) by ring opening polymerization of $\varepsilon$-CL with MPEG as an initiator in the presence of HCl . Et$_2$O. The aqueous solution of synthesized diblock copolymers represented sol phase at room temperature and a sol to gel phase transition as the temperature increased from room temperature to body temperature. To confirm the in vivo gel formation, we observed the formation of gel in the mice body after injection of 20 wt% aqueous solution of each block copolymer. After 2 months, we observed the maintenance of gel without dispersion in mice. In this study, we synthesized diblock copolymers exhibiting sol-gel phase transition and confirmed the feasibility as biomaterials of injectable implantation.n.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.5
• /
• pp.15-21
• /
• 2015

The thermal decomposition characteristics of the ZPP(Zirconium/Potassium perchlorate), widely used as a primary charge of initiators, were investigated by differential scanning calorimetry(DSC). The DSC results with different heating rates were elaborated with AKTS-Thermokinetics software for the determination of the kinetic parameters of the thermal decomposition of ZPP. There was good agreement between the experimental and the simulation curves, based on the determined kinetic parameters, which indicates the validity of the kinetic description of the thermal decomposition process of ZPP.

• Polymer(Korea)
• /
• v.24 no.1
• /
• pp.128-132
• /
• 2000

The miscibility between poly(vinyl chloride) (PVC) and polycaprolactone (PCL)-polyamide block copolymer whose content of PCL block is 62.7 wt%, was studied by differential scanning calorimetry. The PCL segment in the block copolymer and PVC has the miscibility showing single glass transition temperature (T$_{g}$). The miscible PVC molecule inhibited the crystallization of PCL segment, making an amorphous homogeneous phase of PCL and PVC segments at high PVC content. The blends had rubber elasticity at the temperature range between the T$_{g}$ of amorphous homogeneous phase of PCL and PVC segments and the melting temperature of polyamide segment, when both phases coexist.ist.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.3
• /
• pp.313-321
• /
• 2008

오래전부터, 많은 여성들은 자신들의 젊음을 연장하고, 외모를 더 아름답게 가꾸고, 이를 죽을 때까지 유지하는 것을 바래왔다. 이에 의사와 약사들뿐만 아니라, 많은 화장품 연구자들도 노화와 관련된 기술개발에 총력을 기울여 왔다. 따라서, 이들 연구자들은 노화방지를 위한 새로운 원료를 찾고, 이를 안정화하고, 피부로 전달하는 기술개발에 항상 관심을 쏟아왔다. 뛰어난 노화방지 화장품 개발을 위해서, Ubiquinone의 일종인 ldebenone에 대해 연구하였고, 이를 비수계 피부유사막 기술을 가지고 캡슐화하고 약물전달하는 연구를 진행하였다. 먼저, 편광현미경(PM, Polarized Microscope), X-선 회절분석(XRD, X-ray Diffractions) 및 시차주사열량계 (DSC, Differential Scanning Calorimetry)를 이용하여 Idebenone을 담지한 피부유사막 액정을 비수계 조건에서 구조 및 열적특성을 조사하였다. 그 결과 비수계 조건에서도 규칙적으로 패킹(Packing)된 지질이중층(Lipid bilayer)과 용매의 연속층으로 이루어진 고밀집된 라멜라(Lamella) 구조의 형성유무와 이때의 상거동을 확인할 수 있었다. 결론적으로 높은 극성도로인해 물분자와 접촉하면 불안정해지는 경향이 있는 Idebenone을 비수계 조건에서 각질층(SC, Stratum Corneum)과 구조 및 조성이 유사한 피부유사막을 디자인하여 안정하게 캡슐화 하였다. 이를 적용한 화장품은 모든 보관조건에서 유화입자의 안정성을 유지함을 확인하였고, Idebenone의 활성역가 또한 $40^{\circ}C$에서 6개월 동안 약 90%이상을 유지하는 우수한 결과를 나타냈다.