• Journal of the Korean Society of Food Culture
• /
• v.12 no.5
• /
• pp.477-493
• /
• 1997

The consumers' purchase experiences of some imported agricultural products (rice, sesame, garlic, onion, jujube, red pepper, oak mushroom, apple, dried persimmon) and their consciousness for the labelling of the country of origin for agricultural products in Youngnam region were examined in this study. The sample consisted of 438 women who lived in Taegu, Pusan and other cities of Kyungpook and Kyungnam, and the self-administered questionnaire for the survey was used. The main reasons to purchase the imported agricultural products were the wide distribution and low price of them. Most of the consumers were concerned about safety of the imported agricultural products but only a few people experienced unsatisfaction of the products. The price, quality, package, container, label, and safety of the examined products were evaluated worse than those of the domestic products. Generally, although they suffered unsatisfaction, the consumers did not complain because they wanted to avoid troublesome work, which means the consumers did not assert their rights. Some people did not know the labelling system for the country of origin and the place to charge the market violating it. Therefore, it will be necessary for the consumers to receive education about the labelling system for the country of origin and the compensation criteria for consumers' grievances and damages. The current labelling method for the country of origin generally met the consumers' preference but the consumers wanted to improve the position and color of the label. Most consumers could not differentiate the imported products from the domestic products. The results obtained from the survey suggest consumer education for the labelling system for the country of origin and the compensation criteria should be activated through various ways such as mass media and consumer organizations.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.2
• /
• pp.102-114
• /
• 2004

The present work has been developed the interpretation processor including the behavior of material failure and the separation phenomena under transient dynamic loading (the operation of explosive bolt) using AUTODYN V4.3, SoildWork 2003 and TrueGrid V2.1 programs. It has been demonstrated that the interpretation in ridge-cut explosive bolt under dynamic loading condition should be necessary to the appropriate failure model and the basic stress of bolt failure is the principal stress. The use of this interpretation processor developing the present work could be extensively helped to design the shape and the amount of explosives in the explosive bolt having a complex geometry. It is also proved that the interpretation processor approach is an accurate and effective analysis technique to evaluate the separation mechanism in explosive bolts.

• Journal of Korea Multimedia Society
• /
• v.13 no.7
• /
• pp.950-959
• /
• 2010

The Election paradigm can be used as a building block in many practical problems such as group communication, atomic commit and replicated data management where a protocol coordinator might be useful. The problem has been widely studied in the research community since one reason for this wide interest is that many distributed protocols need an election protocol. However, mobile ad hoc systems are more prone to failures than conventional distributed systems. Solving election in such an environment requires from a set of mobile nodes to choose a unique node as a leader based on its priority despite failures or disconnections of mobile nodes. In this paper, we describe a solution to the election problem from mobile ad hoc computing systems and it was proved by temporal logic. This solution is based on the Group Membership Detection algorithm.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.800-805
• /
• 2007

The critical speed of railway bogie is very important in terms of the verification of the vehicle design procedure and safety. The dynamic performance of bogie is tested on the railway roller rig in a laboratory in place of field testing on track. But, the testing on the full scale roller rig caused many problems relating to test costs, test time and has the difficulty in test condition setup. To overcome these problems, scaled models were used in the filed of railway vehicle design and test. In this paper, we have studied the critical speed of scaled bogie model. We have made the 1/5 scaled bogie, the scaled roller rig and analyzed the critical speed of the scaled bogie through the numerical simulation and running test of the scaled bogie. We have confirmed that the analysis results of the critical speed correspond with the test results.

• Journal of Korea Ship Safrty Technology Authority
• /
• v.17
• /
• pp.24-43
• /
• 2005

최근 우리나라 어선어업은 한중일 어업협정, 연안 어업자원 감소 및 연안오염 등 사회적, 환경적 변화가 급변하고 있어 이들을 고려한 어선 선형개발이 필요로 한다. 현재 우리나라의 어선 중 연안지역에서 조업하는 5톤 미만의 소형어선은 전체 어선 중 $65\%$ 이상으로 구성되어 있으나 선박의 크기가 작고 부가가치가 낮은 관계로 지금까지 전문적인 연구는 거의 없었던 것이 현실이다. 한편, 서$\cdot$남해 연안에서 작업 및 항해하는 연안어선들의 해양사고 발생율은 전체사고의 $69.6\%$로 매년 증가하고 있는 추세이다. 전체 어선 안전사고 중 부유폐어망, 로프 등이 추진기에 감긴 사고는 전체 사고의 $10.4\%$로 매년 증가하고 있다. 이에, 추진기 손상에 의한 어선 사고와 연관하여 추진기를 보호하기 위한 장치로서 물분사 추진기(Water-Jet), 펌프제트(Pump-Jet)장치들이 있으나 이들은 고가 수입품으로서 영세한 어민들의 소형어선에 장착하기에는 한계가 있어, 본 연구에서는 폐그물, 로프 등 해상 부유물에 의한 추진기 손상이 발생되지 않는 프로펠러 보호터널 부착 추진장치를 개발을 목적으로 한다. 프로펠러 부착 추진장치는 기존 선미를 수정하여 추진기를 선체 안쪽으로 배치하며 돌출되는 부분은 덕트로 보호하고 있으며 이러한 추진기는 워터제트 추진기와는 달리 가격이 싸고 그물이나 부유물에 걸리지 않고 고장 시 신속한 대응이 쉬워 소형 연안어선에 적합할 뿐만 아니라 그물, 부유물, 갯벌이 많은 국내의 서$\cdot$남해 연안에서 작업 및 항해 시 매우 유용할 것으로 판단된다. 본 연구는 `프로펠러 보호터널 부착 연안어선의 선형개발`을 최종목표로 수행하였으며, 연구개발 내용은 기존 소형 연안어선의 분류 및 특성 조사 연구, 프로펠러 보호터널형 선미 선형 개발, 기존 선형 및 보호터널형 선형의 모형시험, 개발선의 구조강도 특성, 프로펠러 설계 및 단독시험, 보호터널 부착 추진기의 효율 검증 및 개발 대상 어선의 조선공학적 제 계산, 설계도작성 등을 실시하였다. 주요 요소 기술로서는 프로펠러 보호터널 부착 선형의 모형시험을 통하여 선미선형을 개발하며 FRP판부재의 구조강도 특성을 분석하고 그 결과를 활용하여 4톤급 연안어선의 시제선을 건조하고 시운전을 통하여 주요성능을 확인하였다.

• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.491-495
• /
• 2014

Pressure sensitive adhesive (PSA) based on 2-ethylhexyl acrylate (2-EHA)/acrylic acid (AA) copolymer was synthesized using different photoinitiators. Results showed that PSA with Irgacure$^{(R)}$651 (benzyldimethylketal) and Irgacure$^{(R)}$184(1-hydroxy-cyclohexylphenyl ketone) proved to be good for adhesion properties. This may be attributed to strong absorption near 350 nm wavelength and also high solubility in monomer mixtures. The addition of Irgacure$^{(R)}$819, bisacylphosphine oxides as a photoinitiator caused cohesive failure with high loading in a peel test owing to the additional radical formation. It is assumed that the insoluble photoinitiator reacts with oxygene, which may act as a hydrogen donor.

• Korean Journal of Soil Science and Fertilizer
• /
• v.12 no.3
• /
• pp.133-139
• /
• 1979

In order to evaluate the effect of developed Nk compound fertilizers, 17-0-17 granular and powder, and 17-0-14 granules in comparison with single fertilizers, urea and potassium on rice (Oryzae sativa) ; cultivar, Milyang 23, (Orizae Sativa), a field experiment was carried out. Results obtained are as follows : 1. The top dressing of NK compound fertilizers tended to produce higher paddy yield than that of single fertilizers; urea and patasstum muriate. 2. The absorption of potassium and nitrogen by rice plant from the plot of NK granular compound fertilizer, 17-0-17, was greater than from the plots the absorption of those elements received other types of ferilizers and application method The absorded K/Ca+Mg ratio in milli equivalent basis in plant was also appeared to be in same order as the absorption of nitrogen and potassium. 3. From the results of present study it seemed necessary to evaluate the NK compound fertilizer for the top dressing at effective tillering stage of rice as well.

• Journal of the military operations research society of Korea
• /
• v.35 no.1
• /
• pp.83-93
• /
• 2009

The future warfare is known as an effective centric paralysis warfare where military high technologies such as pinpoint strikes are applied. In this future warfare, for supporting military operation leadership and power of concentration in the combat, a new concept of logistic support is required and the focused logistic is proposed as an alternative. To implement this focused logistic, asset visibility should be assumed for every combat units in real time. However, current logistic information systems provide only limited information. In this study, a prototype information system for class 2 and 4 supplies is proposed for overcome limitations of current information system. The developed prototype zooms in on combat units providing business process integrations and logistic function synchronization. Also, asset visibility, the essential element of focused logistics, is presented and utilized to show the speedy and effective logistic support.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.11
• /
• pp.1087-1093
• /
• 2008

Regenerative cooling passage to guarantee the thermal survivability in high performance rocket engine combustors could have complex configurations of the branching/merging of channels and flow turning, etc. By applying the classical hydraulic coefficients which can be found in the literature according to the flow conditions, hydraulic characteristics in regenerative cooling passages can be obtained effectively through dividing the pressure loss into friction loss and local resistance loss. Satisfactory agreement has been obtained by comparing the present results with experimental measurement of water flow test. In addition, the present results were in good agreement with CFD results when the actual coolant, kerosene was used. Therefore, the application of the present method is expected to be useful to design regeneratively cooled combustors.

• Elastomers and Composites
• /
• v.48 no.4
• /
• pp.294-299
• /
• 2013

Solution polymerization was conducted with water-soluble methacrylic acid (MAA) as a monomer and potassium persulfate (KPS) as an initiator at a selected temperature between $70^{\circ}C$ and $90^{\circ}C$. When the ratio between MAA and water was reduced or initiator concentration increased, molecular weights decreased. Molecular weights of poly(methacrylic acid) (PMAA) showed nearly no dependence on reaction temperature. The Weissenberg effect was observed in most polymerization reactions, while its effect weakened at $90^{\circ}C$. The polydispersity index was less than 1.5 in most of the reactions. An increase in the stirring speed produced PMAAs with increasing molecular weights. When the stirring speed reached 800 rpm, we retrieved a monodisperse PMAA with both the number and weight average molecular weights of 791,000 g/mol. The glass transition temperature was found to be $162^{\circ}C$.