• 전기의세계
• /
• v.10
• /
• pp.55-61
• /
• 1963

본 논문에서 취급한 제동권선이 없는 철극선의 3상단락현상을 해명하는데 있어 우선 임의력율의 전류를 횡축분과 직축분으로 분리해서 취급하는 소위 Blonde의 2반작용법(two reaction method)를 썼고, 각종 Reactance를 표시하는데는 편리한 단위법(perunit notation)을 사용했으며, 전기자의 1상저항은 각종 Reactance ( $X_{x}$, $X_{q}$ )의 어느것 보담도 극소치임으로 실제계산에는 무시했으나 과도전류의 변화를 좌우하는 감쇠정수[decrement factor)에는 큰 영향을 준다는 것이 규명되었다. 해석결과로서 3상단락전류의 초기치는 특수치보다 훨씬 큰 이유로서 단락전류가 계자자속을 약하게 만들어 그 반동으로 계자회로에 일정자속을 유지하기 위하여 부문적으로 개자전류가 증대함을 알게되었고, 단락전류의 직축분과 횡축분의 구성분이 규명검토되었고, 발전기의 돌발단락저류는 일반적으로 직류분, 기본파교류분 및 제2조파등을 포함하나 그 전부가 시정수의 역수인 감쇠정수에 지배되어서 지수함수곡선에 따라 감쇠되어 결국에는 지속단락전류에 귀착한다는 사실과 3상단락은 평형단락사고임으로 영상전류는 영이며 각상과도전류의 위상차가 120.deg.라는 것엔 변함이 없다는 것과 끝으로 철극기를 정격속도로 운전해 놓고 이것을 여자해서 무부하전압을 수기시켜 그의 3상전단자를 돌연 단락해서 그의 과도전류의 파형을 Oscillograph로 촬영하면 본론에서 해석한 결과식의 그것과 일치하게 됨을 알 수 있을 것이다.것이다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.221-226
• /
• 1998

과잉온도 차온(Overtemperature $\Delta$T) 및 과잉출력 차온(Overpower $\Delta$T)트립에 쓰이는 온도 측정계통 총 지연시간은 6초로 구성되며 RTD 우회배관 제거시 4.5초의 RTD 응답시간(일차지연 상수로 가정)과 1.5초의 순수지연시간(전자회로 지연시간 + 그립퍼 풀림시간등)으로 구성된다. 그러나 RTD우회배관 제거전 사고분석을 일차지연상수를 3.5초, 순수지연을 2.5초로 모델링하였으므로 Simulink를 통한 영향분석과 Rack 응답시험 계단파 입력신호의 타당성을 평가하였다. RTD 응답시간은 전형적인 1차 지연요소로 나타내며 계전기나 제어봉 Gripper Release 시간 등은 순수 지연으로 가정하고 분석을 수행하고 기타 지연/지상 필터를 발전소와 동일하게 모델링하여 분석하므로써 발전소에서 일어나는 과도현상을 묘사할 수 있다는 점을 고려할 때 RTD우회배관 제거후 응답시간 지연상수가 바뀌더라도 안전하다는 결론에 도달했다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.12
• /
• pp.695-702
• /
• 2009

Dynamic behavior of Libr-water absorption system using low-temperature hot water was investigated numerically. Thermal-hydraulic model of single-effect/double-lift 100 RT chiller was developed by applying transient conservation equations of total mass, Libr mass, energy and momentum to each component. Transient variations of system properties and transport variables were analysed during start-up operation. Numerical analysis were performed to quantify the effects of bulk concentration and part-load operation on the system performance in terms of cooling capacity, coefficient of performance, and time constant of system. For an absorption chiller considered in the present study, optimum bulk concentration was found to exist, which resulted in the minimum time constant with stable cooling capacity. COP and time constant increased as the load decreased down to 40%, below which the time constant increased abruptly and COP decreased as the load decreased further.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.519-520
• /
• 2008

교류에서의 전기저항값은 저항 elements 사이에서 나타나는 stray 전기용량과 elements의 길이에서 유도되는 인덕턴스의 영향으로 직류에서의 저항값과 차이를 보이게 된다. 이러한 직류와 교류에서의 저항값 차이가 대단히 작게 나면서 직류에서와 측정하는 교류에서의 저항값의 차이를 계산에 의해서 산출할 수 교류저항 표준기가 개발되었다. 개발된 교류저항표준기는 bi-filar 구조의 1 $k\Omega$로서, 1.6 kHz에서 직류/교류 저항값의 차이는 0.02 ${\mu}{\Omega}/{\Omega}$ 보다 작으며, 시정수는 1 kHz에서 $(8{\pm}2)\times10^{-10}$으로 측정되었다. 개발된 교류저항 표준기는 교류저항 국가표준에 최상급 표준기로 사용이 되어질 것이다.

• Journal of Advanced Navigation Technology
• /
• v.28 no.1
• /
• pp.60-67
• /
• 2024

The majority of civil aviation accidents are caused by human factors, and especially for rotary-wing aircraft, accidents often occur in situations where pilots unexpectedly or unintentionally enter into instrument meteorological conditions (IIMC). This research analyzed the error rates of rotary-wing aircraft pilots under low visibility conditions from various angles to gain insights into flight characteristics and to explore measures to reduce accidents in IIMC situations. The occurrence rate of errors by pilots under low visibility conditions was examined using a flight simulator equipped with motion, with 65 pilots participating in the experiment. Flight data obtained through the experiment were used to aggregate and analyze the number of errors under various conditions, such as reductions in flight visibility, the presence or absence of spatial disorientation, and the pilot's qualifications. The analysis revealed peculiarities in flight characteristics under various conditions, and significant differences were found in the rate of error occurrence according to the pilot's qualification level, possession of instrument flight rules (IFR) qualifications, and during different phases of flight. The results of this research are expected to contribute significantly to the prevention of aircraft accidents in IIMC situations by improving pilot education and training programs.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.5
• /
• pp.429-440
• /
• 2023

This study explores recent research trends and potential applications of ultrasound optical imaging-based multimodal technology. Ultrasound imaging has been widely utilized in medical diagnostics due to its real-time capability and relative safety. However, the drawback of low resolution in ultrasound imaging has prompted active research on multimodal imaging techniques that combine ultrasound with other imaging modalities to enhance diagnostic accuracy. In particular, ultrasound optical imaging-based multimodal technology enables the utilization of each modality's advantages while compensating for their limitations, offering a means to improve the accuracy of the diagnosis. Various forms of multimodal imaging techniques have been proposed, including the fusion of optical coherence tomography, photoacoustic, fluorescence, fluorescence lifetime, and spectral technology with ultrasound. This study investigates recent research trends in ultrasound optical imaging-based multimodal technology, and its potential applications are demonstrated in the biomedical field. The ultrasound optical imaging-based multimodal technology provides insights into the progress of integrating ultrasound and optical technologies, laying the foundation for novel approaches to enhance diagnostic accuracy in the biomedical domain.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.12
• /
• pp.991-997
• /
• 2013

A new frequency tuning scheme and a transconductor with a wide tuning range and low harmonic distortion is presented. This frequency tuning technique is based on the relationship between the time-constant and the elapsed times in charging a capacitor up to a certain level. Its structure is as simple as that of a conventional tuning scheme using a VCF(Voltage-Controlled Filter) and it does not need a pure sine wave but uses a CLK(Clock) pulse as a reference signal, which is easily obtained from on-chip system clocks or external X-tal oscillators. When a certain reference CLK is given, without complex capacitor arrays the pole frequency of the filter can be controlled continuously in the frequency domain. Simulation results are presented to confirm the operation of the proposed approach.

• Journal of Korean Society of Transportation
• /
• v.32 no.5
• /
• pp.441-451
• /
• 2014

This study proposes a novel performance measure, which is referred to as Hazardous Spacing Index (HSI), to be used for evaluating safety of traffic stream on freeways. The basic principle of the proposed methodology is to investigate whether drivers would have sufficient stopping sight distance (SSD) under limited visibility conditions to eliminate rear-end crash potentials at every time step. Both Road Weather Information Systems (RWIS) and Vehicle Detection Systems (VDS) data were used to derive visibility distance (VD) and SSD, respectively. Moreover, the K-Nearest Neighbors (KNN) method was adopted to predict both VD and SSD in estimating predictive HSIs, which would be used to trigger advanced warning information to encourage safer driving. The outcome of this study is also expected to be used for monitoring freeway traffic stream in terms of safety.

• Journal of the Korean Geographical Society
• /
• v.44 no.6
• /
• pp.706-722
• /
• 2009

This study aims to find the ways to correct and fix the errors in transcription by analyzing Romanization of Korean geographical names in foreign countries. The gazetteers from many countries, place name databases, and map-providing websites are the main source of research. Common error types found in this study are variant name posting, subordinated marking, double posting, spelling errors, and location errors. In fact, transcription of geographical names exhibits more diverse forms and types. The counter measures to fix these errors are as follows, firstly, consistent efforts with regular monitoring to fix errors are essential. Secondly, the one and only standardized Romanization principle is urgent. Thirdly, prompt update and publication in case of place name and/or boundary change is necessary. Fourthly, efforts to register unregistered geographical names are necessary. Lastly, the establishment of central agency solely for the management of geographical names is required.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6D
• /
• pp.935-943
• /
• 2006

Key factors affecting the mode share of Soul metro are investigated. The log-regression model, which can describe the elasticity of the factors with ease, is established rather than the conventional mode choice model is used. The log-regression model requires lower level of data availability for calibration and identifies the impact of the factors on mode share straightforwardly. As a result, it is found that the main reasons why the current mode share of railway is low are due to several problems such as winding lines, inconvenient transfers and unnecessary bypasses. The calibrated model is adopted to evaluate the network reshuffling alternatives. The network reshuffling is to rearrange the existing inefficient railway lines that have frequent transfers and many winding segments. The proposed network reshuffling, which includes straightening winding lines and changing grade separated transfers into cross-platform transfers, turned out to be a good measure to tackle the problems.