• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.451-458
• /
• 2010

Unlike most aerodynamic wind-tunnel, Scramjet Engine Test Facility(SETF) of Korea Aerospace Research Institute should simulate enthalpy condition at a flight condition. SETF is a blow-down type, high-enthalpy wind tunnel. To attain a flight condition, a highly stagnated air comes into the test cell through a supersonic nozzle. Also, an air ejector of the SETF is used for simulating altitude conditions of the engine, and facility starting. SETF has a free-jet type test cell and this free-jet type test cell can simulate a boundary layer effect between an airplane and engine using facility nozzle, but it is too difficult to predict the nature of the facility. Therefore it is required to understand the starting characteristics of the facility by experiments. In this paper, the starting characteristics of the SETF and modifications of the ejector are described.

• Korean Journal of Optics and Photonics
• /
• v.24 no.6
• /
• pp.311-317
• /
• 2013

It was reported in Nature and the Wall Street Journal on June 20th, 2012 that scientists at Duke university have developed a gigapixel camera, capable of over 1,000 times the resolution of a normal camera. According to the reports, this super-resolution camera was motivated by the need of US military authorities to surveil ground and sky. We notice the ripple effect of this technology has spread into the area of national defense and industry, so that this research has started to realize the super-resolution camera as a frontier research topic. As a result, we can understand the optical structure of a super-resolution camera's lens system to be composed of a front, monocentric objective of a single lens plus 98 rear, multiscale camera lenses. We can also obtain the numerical ranges of specification factors related to the optical structure, such as the diameter of the aperture, and the focal length.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.2
• /
• pp.1-7
• /
• 2002

In the modern propulsion systems, requited thrust is obtained using a nozzle. Sometimes shock and induced boundary layer separation is generated in an over-expanded convergent-divergent supersonic nozzle. It occurs because the nozzle expansion ratio is too large for a given nozzle pressure ratio (NPR). This phenomenon can be explained that it redefines effective nozzle geometry, shorer nozzle geometry and lower pressure ratio, in a given pressure ratio. Numerical studies were conducted about a fixed geometry 2D nozzle in overexpanded condition and compared with Hunter's experimental result. For the numerical simulation of the supersonic nozzle, Navier-Stokes equations are considered and as a turbulent model, $\kappa$-$\varepsilon$ /$\kappa$-$\omega$ blended SST two equation turbulent model is used. The characteristics of $\lambda$-shape shock systems due to the interaction of shock and boundary layer was investigated in a low NPR. And the result of comparison of thrust value shows that a fixed geometry nozzle can cover required flight mission.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.2
• /
• pp.79-88
• /
• 2015

This paper introduces surveillance equipment "ADS-B", the core subject of traffic control system and study of ADS-B 1090ES ground receiver. The standard is set not only for functional but also its reliability by analyzing international standard documents and existing products. The Bias circuit is designed for less power consumption, low noise and high gain for RF module. The signal processing is capable of overcoming its bad conditions. MCU part is configured with the latest CPU for high speed communication with external parts and SNMP is selected for remote control communication. The performance of developed receiver satisfies national and international standards and its functions are more advanced compared to foreign receivers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9B
• /
• pp.1551-1562
• /
• 2000

In the using of FBG developed in home land, we designed and manufactured three types of FBG sound transducers the first in Korea. On FBG transducers manufactured we made an demonstrated on respective frequency response peculiarties in the water and analyzed the special characters. As the experimental result on frequency response peculiarities, we made t possible underwater acoustic detection on C type to maximum 18kHz, And for the purpose of realization on multi-point signal detection on wide scope in the water, in the using of WDM(Wavelength Division Multiplexing) method and passive band-pass filter system, established arrays system and succeeded in multi-point underwater acoustic signal detection to the frequency 1.3KHz out of the two B type FBG transducers. Additionally, it would be possible directivity detection for the objects of its source as the intensity of detection signal varies with the sound source's direction and angle. From now on we prepared a new moment on the practical used study on FBG hydrophone.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.4
• /
• pp.721-728
• /
• 2018

This paper introduces various linear block error correction code and compares performances of the correction circuits. As the risk of errors due to power noise has increased, ECC(: Error Correction Code) has been introduced to prevent the bit error. There are two representatives of ECC structures which are SEC-DED(: Single Error Correction Double Error Detection) and SEC-DED-DAEC(: Double Adjacent Error Correction). According to simulation results, the SEC-DED circuit has advantages of small area and short delay time compared to SEC-DED-DAEC circuits. In case of SED-DED-DAEC, there is no big difference between Dutta's and Pedro's from performance point of view. Therefore, Pedro's code is more efficient than Dutta' code since the correction rate of Pedro's code is higher than that of Dutta's code.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.4
• /
• pp.709-716
• /
• 2020

In social media, when posting a post, tag information of an image is generally used because the search is mainly performed using a tag. Users want to expose the post to many people by attaching the tag to the post. Also, the user has trouble posting the tag to be tagged along with the post, and posts that have not been tagged are also posted. In this paper, we propose a method to find an image similar to the input image, extract the label attached to the image, find the posts on instagram, where the label exists as a tag, and recommend other tags in the post. In the proposed method, the label is extracted from the image through the model of the convolutional neural network (CNN) deep learning technique, and the instagram is crawled with the extracted label to sort and recommended tags other than the label. We can see that it is easy to post an image using the recommended tag, increase the exposure of the search, and derive high accuracy due to fewer search errors.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.6
• /
• pp.1225-1241
• /
• 2014

Recently, Financial companies implement DLP(Data Leaks Prevention) security products and enforce internal controls to prevent customer information leaks. Accidental data leaks in financial business increase more and more because internal controls are insufficient. Security officials and IT operation staffs struggle to plan countermeasures to respond to all kinds of accidental data leaks. It is difficult to prevent data leaks and to control information flow in business without research applications that handle business and privacy information. Therefore this paper describes business and privacy information flow on applications and how to plan and deploy security container based OS-level and Hypervisor virtualization technology to enforce internal controls for applications. After building security container, it was verified to implement internal controls and to prevent customer information leaks. With security policies additional security functions was implemented in security container and With recycling security container costs and time of response to security vulnerabilities was reduced.

• The KIPS Transactions:PartA
• /
• v.18A no.2
• /
• pp.53-60
• /
• 2011

Touch screen technologies are widely used as the basic input for mobile devices. However, for smartphones, touch screens have been utilized as a simple device that merely process text data. It has been considered an inappropriate multimedia input device for one to use design applications, such as painting, due to its narrow touch screen space, which makes it inconvenient to draw pictures. In this study, we propose to enhance this weakness by using infrared approach on a smartphone's input interface. The usage of infrared approach will allow for quick and accurate operations without facing any space constraints. In this paper, we provide a detailed description of the design and implementation of a smartphone user interface using infrared pointing device. Additionally, using experimental results, we prove that our proposed approach is more convenient and efficient than traditional touch screen approaches used in smartphones.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.3
• /
• pp.699-709
• /
• 1999

This paper is aimed at defining items of analysis using SNMP MIB-II for the purpose of managing the Internet based network running on TCP/IP protocol, and then utilize these items, in conjunction with various Web technology and JAVA to design and implement a Web based interface of a management system to analyze the performance and status of the Internet. Among the required items in order to accomplish this task are utilization, interface packet transmission rate, I/O traffic ratio, and so on. Based on these items, the actual analysis is carried out by the Web interface according to the type of analysis. For instance, the interface executes the function of real-time analysis, collection processing, elementary analysis and detailed analysis. The demand of the user is fed into the Web interface which carried out a real-time analysis with the client system which in turn will eventually produce the results of the analysis. In order words, the interface acts as a mediator server for the analysis system. Furthermore, a protocol for exchange of data and messages between the server and the analysis system, the MATP protocol, was also designed. Finally, the results obtained through the system presented in this paper were displayed on screen according to the type of analysis. The system realized in this paper uses We technology and is independent of platform and allows the user to determine the performance of Internet at his/her own host according to the selected items of analysis.