• Journal of agriculture & life science
• /
• v.46 no.5
• /
• pp.143-152
• /
• 2012

This study was performed to reduce the operating cost of a greenhouse by securing electric energy required for greenhouse operation. Therefore, it experimentally reviewed the performance analysis of photovoltaic system in terms of maximum amount of generated electric power based on the amount of horizontal solar radiation during daytime. That is to say, the maximum solar radiation at 300, 400, 500, 600, 700, 800 and 900 W. $m^{-2}$, respectively. The amount of momentary electric power of the photovoltaic system at any was about 970 W and we found that the momentary efficiency of the photovoltaic system that was used for this experiment was 97%. In the case of this system, we found that electric power will be generated when amount of horizontal solar radiation is more than 200 W. $m^{-2}$, at minimum. If the amount of horizontal solar radiation is increased, the maximum power generation is also increased. At that time, the maximum efficiencies were 30, 78, 86 and 90%, respectively. However, when the amount of insolation was about 800 W. $m^{-2}$, the maximum power generation tended to be lower than 700 W. $m^{-2}$. The efficiency which caused the maximum electric power was decreased to less than 97% of the momentary generated electric power. When the total amounts of horizontal solar radiation per day were 3.24, 8.10, 10, 90, 12.70, 14.33, 19.53 and $21.48MJ{\cdot}m^{-2}$ respectively, the total amounts of power energy were 0.03, 0.40, 3.60, 4.37, 4.71, 4.70 and 4.91 kWh. And it represented that the total amounts of power energy were either decreased or increased a bit on the border between some solar radiations. The temperature at the back of the array tended to be higher than the temperature at the front but it demonstrated an increased when the amount of solar radiation increased. In the case of this system, the performance of the module in terms of degradation has not been shown yet.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.18 no.5
• /
• pp.389-397
• /
• 1998

For an effective and efficient management of large amounts of preservice/inservice inspection(PSI/ISI) data in nuclear power plants, an intellegent Windows 95-based data management program was developed. This program enables the prompt extraction of previously conducted PSI/ISI conditions and results so that the time-consuming data management, painstaking data processing and analysis in the past are avoided. The program extracts, and the associated remedies. Furthermore, additional inspection data and comments can be easily added or deleted for subsequent PSI/ISI operation. Although the initial version of the program was applied to Kori nuclear power plant, this program can be equally applied to other nuclear power plant. And also this program can be used to offer the fundamental data for application of evaluation data related to fracture mechanics analysis(FMA), probabilistic reliability assessment(PRA) of PSI/ISI results, performance demonstration initiative(PDI) and risk-informed ISI based on probability of detection(POD) information of ultrasonic examination. Besides, the program can be further developed as a unique PSI/ISI data management expert system that can be apart of PSI/ISI data management expert system that can be a part of PSI/ISI Total Support System(TSS) for Korean nuclear power plants.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.6
• /
• pp.8-17
• /
• 2011

Recently, fusion camera systems that consist of depth sensors and color cameras have been widely developed with the advent of a new type of sensor, time-of-flight (TOF) depth sensor. The physical limitation of depth sensors usually generates low resolution images compared to corresponding color images. Therefore, the pre-processing module, such as camera calibration, three dimensional warping, and hole filling, is necessary to generate the high resolution depth map that is placed in the image plane of the color image. However, the result of the pre-processing step is usually inaccurate due to errors from the camera calibration and the depth measurement. Therefore, in this paper, we present a depth map upsampling method robust these errors. First, the confidence of the measured depth value is estimated by the interrelation between the color image and the pre-upsampled depth map. Then, the detailed depth map can be generated by the modified kernel regression method which exclude depth values having low confidence. Our proposed algorithm guarantees the high quality result in the presence of the camera calibration errors. Experimental comparison with other data fusion techniques shows the superiority of our proposed method.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.6
• /
• pp.305-314
• /
• 2017

Ocean wave energy harvesting is still too expensive despite developing a variety of wave energy converter (WEC) devices. For the cost-effective wave energy harvesting, it can be an effective measure to use existing breakwaters or newly installed breakwaters for both wave control and energy harvesting purposes. In this study, we investigated the functionality of both breakwater and wave-power generator for the oscillating water column (OWC)-type wave energy converter (WEC) installed in a pneumatic floating breakwater, which was originally developed as a floating breakwater. In order to verify the performance of the breakwater as a WEC, the air flow velocity from air-chamber to WEC has to be evaluated properly. Therefore, air flow velocity, wave transformation and motion of floating structure was numerically implemented based on BEM from linear velocity potential theory without considering the compressibility of air within the chamber. Air pressure, meanwhile, was assumed to be fluctuated by the motions of structure and the water level change within air-chamber. The validity of the obtained values can be determined by comparing the previous results from the numerical analysis for different shapes. Based on numerical model results, wave transformation characteristics around OWC system mounted on the fixed and floating breakwaters, and motions of the structure with air flow velocities are investigated. In summary, all numerical results are almost identical to the previous research considering air compressibility. Therefore, it can be concluded that this analysis not considering air compressibility in the air chamber is more efficient and practical method.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.1
• /
• pp.43-51
• /
• 2005

This paper presents a waste load allocation study for the Incheon coastal environment, where a computer model, called AQUASEA, was applied. A finite element mesh was constructed and refined to cover the complicated geometry of Incheon coastal sea. The tidal height at 13 places of Incheon coastal boundary and flow of the Han River were given as an input condition to the tidal simulation. All pollution sources that discharge into Incheon coast were given as input data to the water quality simulation. The modeled parameters include tidal flow and COD(Chemical Oxygen Demand). The model was calibrated and verified with the field measurements. The model results showed reasonable agreements with field measurements in both tidal flow and water quality. Systems analysis showed that the pollution load from the Han River caused recognizable impacts on the water quality of Incheon coast from Yeomhwa waterway to northern area of Younghungdo. The loads from Incheon City affected water quality from the area below Youngjongdo to the area above Jawalldo. The discharge from the Sihwa Lake caused discernible impacts on the coastal zone from the dike outlet to the Incheon harbor, and pollution loads from Kyungkido affected the sea near the Oido. An effective water quality management plan was developed from the waste load allocation analysis of the validated model, that the maximum waste loads can be discharged without violating the water quality standard given in the Incheon coastal environment.

• The Journal of Engineering Geology
• /
• v.23 no.4
• /
• pp.409-425
• /
• 2013

This study presents a prediction of a time-series of the area inundated by effluent from Heavenly Lake caused by ground behavior prior to a volcanic eruption. A GIS-based hydrological algorithm that considers the multi-flow direction of effluent, the absorption and storage capacity of the ground soil, the storage volume of the basin or the depression terrain, was developed. To analyze the propagation pattern, four hypothetical collapse zones on the cheonji ground were set, considering the topographical characteristics and distributions of volcanic rocks at Mt. Baekdu. The results indicate that at 3 hours after collapse, for both scenarios 1 and 2 (collapses of the entire/southern boundary of cheonji), a flood hazard exists for villages in China, but not for those on the North Korean side of the mountain, due to the topographical characteristics of Mt. Baekdu. It is predicted that villages in both North Korea and China would be significantly damaged by flood inundation at 3 hours elapsed time for both scenarios 3 and 4 (collapses on the southern boundary of cheonji and on the southeastern-peak area).

• Ecology and Resilient Infrastructure
• /
• v.4 no.2
• /
• pp.97-104
• /
• 2017

For the restoration of lateral connectivity between channel and floodplain, it is important to find the former floodplain and to characterize its land use in streams which were channelized by the levee construction for the flood protection. The aim of this study is to map the former floodplains and to assess its land use pattern in the Cheongmi-cheon Stream, Korea. The former floodplains were explored by being overlapped on a digital elevation model (DEM), digital topographic map and design flood level using a geographical information system (GIS) in the Cheongmi-cheon Stream basin. The land use of the identified former floodplains was classified by land-use map. The total number of the former floodplains was 104 and their total area was $11.9km^2$ in the Cheongmi-cheon Stream. The land use pattern of the former floodplains was mostly farmland (87.1%). The former floodplains were usually surrounded by mountain forest in the downstream of the Cheongmi-cheon Stream. These former floodplains are probably suitable for restoration of lateral connectivity because of lower ratio of urban area but higher ratio of farmland. The results of delineation and land use analysis of the former floodplain can be used as a baseline data for planning stream restoration in the Cheongmi-cheon Stream.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1430-1434
• /
• 2005

금강 유역과 같이 복잡한 하천유역 시스템의 관리를 위해서는 시스템 요소들을 통합적으로 분석할 수 있는 효과적인 의사결정지원 도구가 필요하다. K-MODSIM 모형은 단기 물관리, 장기 운영계획, 가뭄 대비계획 및 물관련 분쟁 해결을 위해 보다 개선된 유역관리 전략을 수립하기 위한 컴퓨터 기반 도구로 개발되었으며, 본 연구에서는 K-MODSIM 모형에 저수지 운영률을 반영하여 유역의 용수배분을 평가하였다. 유역 저수지군 운영 환경 및 제약조건을 반영한 네트워크를 구성한 후, 두 단계의 모형 검정을 수행하였다. 먼저 물리적 검정을 통해서 전체 대상 수계의 상하류 물수지를 검토하고, 다음 단계인 운영 측면의 검정에서 물리적으로 나타나는 상황이 댐 운영이나 제약 조건 등에 부합하는지의 여부를 검토하였다. 대청댐과 용담댐의 통합 운영을 위한 최적 운영률의 개발은 동적계획법 소프트웨어인 CSUDP를 이용하여 수행하였으며, 여기서 사유한 접근법은 음해 추계학적 동적계획법이다. 이 접근방법은 유입량 시계열을 추계학적으로 모의발생시키고, CSUDP 모형은 모의발생시킨 유입량 시계열에 대한 최적운영률을 찾기 위해 사용하며, CSUDP의 최적화 결과에 대한 통계적인 분석을 통해 월단위 운영률을 도출하였다. K-MODSIM 모형에 저수지 운영률을 반영하여 유역의 용수배분을 평가하였다. 유역 저수지군 운영 환경 및 제약조건을 반영한 네트워크를 구성하고, 대청댐과 용담댐의 통합 운영을 위한 최적연계 운영를을 개발하여 다음과 같은 운영 시나리오들을 개발하고 평가하였다. $\cdot$ 금강수계에 대한 용당댐의 영향 평가 $\cdot$ 댐 연계운영시 수요량 변화에 따른 영향 평가 $\cdot$ 하도추적을 고려한 일별모형의 검증 개발된 운영률과 하도추적방법을 K-MODSIM 모형에서 검증하기 위해서 vb.net 스크립트 파일을 개발하여 적용하였다.L이하로 이를 유등천 상류부에 공급할 경우 유등천의 수질은 BOD 6.7mg/L, TN 9.80mg/L, TP 0.90mg/L를 나타낼 것으로 예측된다. 고도처리시설의 도입 후 금강 합류점에서 갑천의 예측 BOD는 7.4mg/L로 현재 9.0mg/L에 비하여 개선되지만 이는 금강수계 오염총량 관리계획의 시$\cdot$도 경계지점 목표수질인 5.9mg/L를 만족시키지 못하므로, 이를 만족시키기 위해서는 방류수 BOD 7.2mg/L이하로 처리해야 할 것으로 판단된다.which support only concepts or image features.방하는 것이 선계기준에 적합한 것으로 나타났다. 밸브 개폐에 따른 수압 변화를 모의한 결과 밸브 개폐도를 적절히 유지하여 필요수량의 확보 및 누수방지대책에 활용할 수 있을 것으로 판단된다.8R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사도가 증가할수록 증가하였으며 $10\% 경사일 때를 기준으로 $Ro(mm)=Ro_{10}{\times}0.797{\times}e^{-0.021s(\%)}$로 나타났다.천성 승모판 폐쇄 부전등을 초래하는 심각한 선천성 심질환이다. 그러나 진단 즉시 직접 좌관상동맥-대동맥 이식술로 수술적 교정을 해줌으로써 좋은 성적을 기대할 수 있음을 보여주었다.특히 교사들이 중요하게 인식하는 해방적 행동에 대한 목표를 강조하여 적용할 필요가 있음을 시사하고 있다.교하여 유의한 차이가 관찰되지 않았다. 또한 HSP 환자군에서도 $IL1RN^{*}2$ allele 빈도와

• Ecology and Resilient Infrastructure
• /
• v.2 no.4
• /
• pp.324-329
• /
• 2015

For the restoration of lateral connectivity between rivers and floodplains, it is important to find the isolated former floodplain (IFF) and to characterize its land use in Korean rivers which were channelized by levee constructions for flood protection. The aim of this study is to map the IFF and to assess its land use pattern in the Nakdong River, Korea. The isolated former floodplain was explored by being overlapped on a digital elevation model (DEM), digital topographic map and design flood level using a geographical information system (GIS) in the Nakdong River basin. The land use of the identified IFF was classified by land-use map. The total number of IFFs was 384 and their total area was $291km^2$. While IFFs were usually surrounded by mountain forest in the upper river area, they tended to be located on wide plain areas in the downstream area of Nakdong River. The land use pattern of IFFs was mostly farmland (73.9%) and urban areas (12.7%) in the river. The results of delineation and land use analysis of isolated former floodplain in the Nakdong River will be used as a base line data for planning stream restoration.

• The Journal of Korean Society for Radiation Therapy
• /
• v.25 no.1
• /
• pp.41-47
• /
• 2013

Purpose: To evaluate the usefulness of Integrated PET/CT and compare the gloss tumor volume (GTV) identified on CT, PET, PET/CT to that obtained from fluorodeoxyglucose (FDG). Materials and Methods: This experimental study was obtained using GE Discovery 690 (General Electric Healthcare, Milwaukee, MI, USA) PET/CT simulator with Gammex Laser System for five non-small cell lung cancer (NSCLC) patients. In order to increase the reproducibility of the patient setup, We have to fixed to patients using the Extended Wing Board. GTV delineation was painted using the EclipseTM ver.10 contouring program for CT, PET, PET/CT images. And then, We were to compare the changes in the GTV. Results: These results are drawn from 5 patients who have atelectasis or pneumonitis. Compared to CT defined GTV, PET was decreased by 10.5%, 11.8% and increased by 67.9%, 220%, 19.4%. PET/CT was decreased by 7.7%, 6.7%, 28% and increased by 232%, 24%. Conclusion: We were able to determine the usefulness of PET/CT simulator for NSCLC. PET/CT simulator in radiation therapy is useful to define the target volume and It is possible to delineate Objective and accurate target volume. It seems to be applicable to other areas in the near future.