• Korean journal of food and cookery science
• /
• v.23 no.5
• /
• pp.589-600
• /
• 2007

Recently, with the rapid expansion of the franchise restaurants, ensuring food safety has become essential for restaurant growth. Consequently, the need for food safety training and related material is in increasing demand. In this study, we identified potentially hazardous risk factors for ensuring food safety in restaurants through a food safety monitoring tool, and developed training materials for restaurant employees based on the results. The surveyed restaurants, consisting of 6 Korean restaurants and 1 Japanese restaurant were located in Seoul. Their average check was 15,500 won, ranging from 9,000 to 23,000 won. The range of their total space was 297.5 to $1322.4m^2$, and the amount of kitchen space per total area ranged from 4.4 to 30 percent. The mean score for food safety management performance was 57 out of 100 points, with a range of 51 to 73 points. For risk factor analysis, the most frequently cited sanitary violations involved the handwashing methods/handwashing facilities supplies (7.5%), receiving activities (7.5%), checking and recording of frozen/refrigerated foods temperature (0%), holding foods off the floor (0%), washing of fruits and vegetables (42%), planning and supervising facility cleaning and maintaining programs of facilities (50%), pest control (13%), and toilet equipped/cleaned (13%). Base on these results, the main points that were addressed in the hygiene training of restaurant employees included 4 principles and 8 concepts. The four principles consisted of personal hygiene, prevention of food contamination, time/temperature control, and refrigerator storage. The eight concepts included: (1) personal hygiene and cleanliness with proper handwashing, (2) approved food source and receiving management (3) refrigerator and freezer control, (4) storage management, (5) labeling, (6) prevention of food contamination, (7) cooking and reheating control, and (8) cleaning, sanitation, and plumbing control. Finally, a hygiene training manual and poster leaflets were developed as a food safety training materials for restaurants employees.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.3
• /
• pp.58-74
• /
• 2018

This study aims to propose baseline data for designing restoration of Gaobyulup, researching space formation and characteristics of gardens of Gaobyulup, which located in the foot of Cheonmasan Mountain in Namyangju. Gaobyulup is a remain in retirement of Gyulsan Yu-Won Lee, a representative politician, administrator, and tea drinker in late Joseon Dynasty. The results of the research about the shape of Gaobyulup deducted through reference review, poetry and prose analysis, an on-the-spot survey and residents' interview are below: Lee, who used pseudonym as 'Gyulsan,' which menas Jongnamsan Mountain, yearned Mangcheonbyeoreop(輞川別業) by Yu Wang and retirement with a country house operation by Seogye Sedang Park. In the persuit of this ideal, he created and operated a country house in Gaogok of Yangju, which a family burial ground was located. Gaobyulup, which located in Gaogok in the lower part of Cheonmasan Mountain, was largely composed outer and inner gardens, and the area of house operation was started from a stone post of Gaobokji The inner garden of Gaobyulup was including major garden components like buildings, such as Sasihyanggwan, Obaekganjung, Imharyoe and Toesadam, and Chaewon near Haengrangchae, and Gwawon in an backyard. In addition, Younggwijung pavilion, which located 850m away from Gaobyulup, was the another country house inside the Byulup, thus Gaobyulup shows a duplex space formation. In the inner garden of Gaobyulup, there are Sasihyanggwan, which had functions of Sarangchae as library and depository of old paintings and calligraphic works, and Obaekganjung, a small Sarangchae which connected with Sasihyanggwan in the form of a transept. Yusanggoksuger located near Obaekganjung. Additionally, Imharyeo, a library with a tablet of Byeokryowon(??園), which located in the highest point in Byulup, has the functions of a reading room and a tea house. Many Taihu stones were located not only in Toesadam, a square-formed pond with lotus but also many places in the inner gardens. And rare garden plants were planted. These were closely related to the trend of horticulture for pleasure, wealth, and collecting old paintings and calligraphic works for pleasure of Lee. Meanwhile, the area of Younggwijung pavilion, located in Gaocheon stream fall from Byulup to Manhoiam, looks like Wooampok, a enjoying place of other personages, who use their pseudonym as "Oksan" or "Wooam" Lee identifies Wooampok as "Jesampok" and carved 'Gyulsan' s he declared this place is his operating area. Lee built Younggwijung pavilion and planted many peach trees for recreation of utopia. The stone letters of Byukpadongcheon, located in front of a bridge in the foreside of Younggwijung pavilion, seems another enchanted land created in Gaobokji inside. Lee carved Jeilsan in huge rock on the falls rear Manhoiam temple, which Lee did great role of foundation of the temple, so he identifies that this place was the end of the outer garden of Gaobyulup. This study tries to estimate traces of the country house in Gaogok through reference review and on-th-spot survey, and the results from this study are presumed based on site remains only conformed today. It needs to discover second scenary or stone carved letters between Jeilsan and Jesampok. Additionally, exact formation characteristics of Gaobyulup should be identified through excavation survey later. To do so, an interest and a major role of Namyangju-si must be equipped for future restoration of Gaobyulup.

• Journal of Intelligence and Information Systems
• /
• v.20 no.1
• /
• pp.149-161
• /
• 2014

The export of domestic public services to overseas markets contains many potential obstacles, stemming from different export procedures, the target services, and socio-economic environments. In order to alleviate these problems, the business incubation platform as an open business ecosystem can be a powerful instrument to support the decisions taken by participants and stakeholders. In this paper, we propose an ontology model and its implementation processes for the business incubation platform with an open and pervasive architecture to support public service exports. For the conceptual model of platform ontology, export case studies are used for requirements analysis. The conceptual model shows the basic structure, with vocabulary and its meaning, the relationship between ontologies, and key attributes. For the implementation and test of the ontology model, the logical structure is edited using Prot$\acute{e}$g$\acute{e}$ editor. The core engine of the business incubation platform is the simulator module, where the various contexts of export businesses should be captured, defined, and shared with other modules through ontologies. It is well-known that an ontology, with which concepts and their relationships are represented using a shared vocabulary, is an efficient and effective tool for organizing meta-information to develop structural frameworks in a particular domain. The proposed model consists of five ontologies derived from a requirements survey of major stakeholders and their operational scenarios: service, requirements, environment, enterprise, and county. The service ontology contains several components that can find and categorize public services through a case analysis of the public service export. Key attributes of the service ontology are composed of categories including objective, requirements, activity, and service. The objective category, which has sub-attributes including operational body (organization) and user, acts as a reference to search and classify public services. The requirements category relates to the functional needs at a particular phase of system (service) design or operation. Sub-attributes of requirements are user, application, platform, architecture, and social overhead. The activity category represents business processes during the operation and maintenance phase. The activity category also has sub-attributes including facility, software, and project unit. The service category, with sub-attributes such as target, time, and place, acts as a reference to sort and classify the public services. The requirements ontology is derived from the basic and common components of public services and target countries. The key attributes of the requirements ontology are business, technology, and constraints. Business requirements represent the needs of processes and activities for public service export; technology represents the technological requirements for the operation of public services; and constraints represent the business law, regulations, or cultural characteristics of the target country. The environment ontology is derived from case studies of target countries for public service operation. Key attributes of the environment ontology are user, requirements, and activity. A user includes stakeholders in public services, from citizens to operators and managers; the requirements attribute represents the managerial and physical needs during operation; the activity attribute represents business processes in detail. The enterprise ontology is introduced from a previous study, and its attributes are activity, organization, strategy, marketing, and time. The country ontology is derived from the demographic and geopolitical analysis of the target country, and its key attributes are economy, social infrastructure, law, regulation, customs, population, location, and development strategies. The priority list for target services for a certain country and/or the priority list for target countries for a certain public services are generated by a matching algorithm. These lists are used as input seeds to simulate the consortium partners, and government's policies and programs. In the simulation, the environmental differences between Korea and the target country can be customized through a gap analysis and work-flow optimization process. When the process gap between Korea and the target country is too large for a single corporation to cover, a consortium is considered an alternative choice, and various alternatives are derived from the capability index of enterprises. For financial packages, a mix of various foreign aid funds can be simulated during this stage. It is expected that the proposed ontology model and the business incubation platform can be used by various participants in the public service export market. It could be especially beneficial to small and medium businesses that have relatively fewer resources and experience with public service export. We also expect that the open and pervasive service architecture in a digital business ecosystem will help stakeholders find new opportunities through information sharing and collaboration on business processes.

• The Korean Journal of Petroleum Geology
• /
• v.14 no.1
• /
• pp.1-11
• /
• 2008

As conventional oil and gas reservoirs become depleted, interests for oil sands has rapidly increased in the last decade. Oil sands are mixture of bitumen, water, and host sediments of sand and clay. Most oil sand is unconsolidated sand that is held together by bitumen. Bitumen has hydrocarbon in situ viscosity of >10,000 centipoises (cP) at reservoir condition and has API gravity between $8-14^{\circ}$. The largest oil sand deposits are in Alberta and Saskatchewan, Canada. The reverves are approximated at 1.7 trillion barrels of initial oil-in-place and 173 billion barrels of remaining established reserves. Alberta has a number of oil sands deposits which are grouped into three oil sand development areas - the Athabasca, Cold Lake, and Peace River, with the largest current bitumen production from Athabasca. Principal oil sands deposits consist of the McMurray Fm and Wabiskaw Mbr in Athabasca area, the Gething and Bluesky formations in Peace River area, and relatively thin multi-reservoir deposits of McMurray, Clearwater, and Grand Rapid formations in Cold Lake area. The reservoir sediments were deposited in the foreland basin (Western Canada Sedimentary Basin) formed by collision between the Pacific and North America plates and the subsequent thrusting movements in the Mesozoic. The deposits are underlain by basement rocks of Paleozoic carbonates with highly variable topography. The oil sands deposits were formed during the Early Cretaceous transgression which occurred along the Cretaceous Interior Seaway in North America. The oil-sands-hosting McMurray and Wabiskaw deposits in the Athabasca area consist of the lower fluvial and the upper estuarine-offshore sediments, reflecting the broad and overall transgression. The deposits are characterized by facies heterogeneity of channelized reservoir sands and non-reservoir muds. Main reservoir bodies of the McMurray Formation are fluvial and estuarine channel-point bar complexes which are interbedded with fine-grained deposits formed in floodplain, tidal flat, and estuarine bay. The Wabiskaw deposits (basal member of the Clearwater Formation) commonly comprise sheet-shaped offshore muds and sands, but occasionally show deep-incision into the McMurray deposits, forming channelized reservoir sand bodies of oil sands. In Canada, bitumen of oil sands deposits is produced by surface mining or in-situ thermal recovery processes. Bitumen sands recovered by surface mining are changed into synthetic crude oil through extraction and upgrading processes. On the other hand, bitumen produced by in-situ thermal recovery is transported to refinery only through bitumen blending process. The in-situ thermal recovery technology is represented by Steam-Assisted Gravity Drainage and Cyclic Steam Stimulation. These technologies are based on steam injection into bitumen sand reservoirs for increase in reservoir in-situ temperature and in bitumen mobility. In oil sands reservoirs, efficiency for steam propagation is controlled mainly by reservoir geology. Accordingly, understanding of geological factors and characteristics of oil sands reservoir deposits is prerequisite for well-designed development planning and effective bitumen production. As significant geological factors and characteristics in oil sands reservoir deposits, this study suggests (1) pay of bitumen sands and connectivity, (2) bitumen content and saturation, (3) geologic structure, (4) distribution of mud baffles and plugs, (5) thickness and lateral continuity of mud interbeds, (6) distribution of water-saturated sands, (7) distribution of gas-saturated sands, (8) direction of lateral accretion of point bar, (9) distribution of diagenetic layers and nodules, and (10) texture and fabric change within reservoir sand body.

• Journal of Animal Environmental Science
• /
• v.18 no.2
• /
• pp.99-110
• /
• 2012

The purpose of the study is to collect basis data for to establish standard administrative processes of liquid fertilizer treatment. From this survey we could make out the key point of each step through a case of effective liquid manure treatment system in pig house. It is divided into six step; 1. piggery slurry management step, 2. Solid-liquid separation step, 3. liquid fertilizer treatment (aeration) step, 4. liquid fertilizer treatment (microorganism, recirculation and internal return) step, 5. liquid fertilizer treatment (completion) step, 6. land application step. From now on, standardization process of liquid manure treatment technologies need to be develop based on the six steps process.

• The Korean Journal of Archival Studies
• /
• no.26
• /
• pp.103-149
• /
• 2010

Documentation strategy has been experimented in various subject areas and local regions since late 1980's when it was proposed as archival appraisal and selection methods by archival communities in the United States. Though it was criticized to be too ideal, it needs to shed new light on the potentialities of the strategy for documenting local regions in digital environment. The purpose of this study is to analyse the implementation issues of documentation strategy and to suggest the directions for documenting local regions of Korea through the application of the strategy. The documentation strategy which was developed more than twenty years ago in mostly western countries gives us some implications for documenting local regions even in current digital environments. They are as follows; Firstly, documentation strategy can enhance the value of archivists as well as archives in local regions because archivist should be active shaper of history rather than passive receiver of archives according to the strategy. It can also be a solution for overcoming poor conditions of local archives management in Korea. Secondly, the strategy can encourage cooperation between collecting institutions including museums, libraries, archives, cultural centers, history institutions, etc. in each local region. In the networked environment the cooperation can be achieved more effectively than in traditional environment where the heavy workload of cooperative institutions is needed. Thirdly, the strategy can facilitate solidarity of various groups in local region. According to the analysis of the strategy projects, it is essential to collect their knowledge, passion, and enthusiasm of related groups to effectively implement the strategy. It can also provide a methodology for minor groups of society to document their memories. This study suggests the directions of documenting local regions in consideration of current archival infrastructure of Korean as follows; Firstly, very selective and intensive documentation should be pursued rather than comprehensive one for documenting local regions. Though it is a very political problem to decide what subject has priority for documentation, interests of local community members as well as professional groups should be considered in the decision-making process seriously. Secondly, it is effective to plan integrated representation of local history in the distributed custody of local archives. It would be desirable to implement archival gateway for integrated search and representation of local archives regardless of the location of archives. Thirdly, it is necessary to try digital documentation using Web 2.0 technologies. Documentation strategy as the methodology of selecting and acquiring archives can not avoid subjectivity and prejudices of appraiser completely. To mitigate the problems, open documentation system should be prepared for reflecting different interests of different groups. Fourth, it is desirable to apply a conspectus model used in cooperative collection management of libraries to document local regions digitally. Conspectus can show existing documentation strength and future documentation intensity for each participating institution. Using this, documentation level of each subject area can be set up cooperatively and effectively in the local regions.

• The Journal of Engineering Geology
• /
• v.29 no.1
• /
• pp.51-68
• /
• 2019

This study performs to evaluate adaptability of seashore filtering type seawater-intake which adapts dua1 filter well alternative for direct seawater-intake. This study varies filter condition of seashore free surface aquifer which is composed of sand layer then installs real size dual filter well and single filter well to evaluate water permeability and proper pumping amount according to filter condition. According to result of step aquifer test, it is analysed that 110.3% synergy effect of water permeability coefficient is happened compare to single filter since dual filter well has better improvement. dual filter has higher water permeability coefficient compare to same pumping amount, this means dual filter has more improved water permeability than single filter. According to analysis result of continuous aquifer test, it is evaluated that dual filter well (SD1200) has higher water permeability than single filter well (SS800) by analysis of water permeability coefficient using monitoring well and gauging well, it is also analysed dual filter has 110.7% synergy effect of water permeability coefficient. As a evaluation result of pumping amount according to analysis of water level dropping rate, it is analysed that dual filter well increased 122.8% pumping amount compare to single filter well when water level dropping is 2.0 m. As a result of calculating proper pumping amount using water level dropping rate, it is analysed that dual filter well shows 136.0% higher pumping amount compare to single filter well. It is evaluated that proper pumping amount has 122.8~160% improvement compare to single filter, pumping amount improvement rate is 139.6% compare to averaged single filter. In other words, about 40% water intake efficiency can be improved by just installation of dual filter compare to normal well. Proper pumping amount of dual filter well using inflection point is 2843.3 L/min and it is evaluated that daily seawater intake amount is about $4,100m^3/day$ (${\fallingdotseq}4094.3m^3/day$) in one hole of dual filter well. Since it is possible to intake plenty of water in one hole, higher adaptability is anticipated. In case of intaking seawater using dual filter well, no worries regarding damages on facilities caused by natural disaster such as severe weather or typhoon, improvement of pollution is anticipated due to seashore sand layer acts like filter. Therefore, It can be alternative of environmental issue for existing seawater intake technique, can save maintenance expenses related to installation fee or damages and has excellent adaptability in economic aspect. The result of this study will be utilized as a basic data of site demonstration test for adaptation of riverside filtered water of upcoming dual filter well and this study is also anticipated to present standard of well design and construction related to riverside filter and seashore filter technique.