• Journal of the Korean Professional Engineers Association
• /
• v.1 no.4
• /
• pp.9-15
• /
• 1968

콘크리트 공사시방에 있어서 강도 최저강도를 지정하는 것이 오늘날 까지의 관습으로 되어있다. 즉, 몇개의 강도시험의 평균치가 얼마이상 이어야 된다든가, 전부의 콘크리트가 얼마 이상의 압축강도를 갖어야 된다든가, 또는 콘크리트는 28일 압축강도 얼마를 낼 수 있도록 콘크리트 단위용 적당 cement를 몇 kg, 혹은 몇 포대를 사용해야 된다 든가로 규정되는 것이 보통으로 되여 있다. 그러나 이 방법만으로는 그 콘크리트의 실제의 안전율을 예측할 수 없을뿐만 아니라 균질한 콘크리트를 얻는것을 기대할 수가 없을 것이다. 즉 합리적인 시방이 되지 못 한다. 두말 할 것도 없이 우리는 현장에서 건축물설계자가 요구하는 강도의 콘크리트를 얻어야 될 것이고, 또 한편으로 그 강도가 골고루 되어야 할 것이다. 즉 강도의 변화가 심하지 않아야 될 것이다. 이것을 기대하기 위하여 concrete 제조현장에서 통계학적 이론에 입각한 품질관리를 행하는 것이다. 그렇게 하므로서 보다 합리적인 시방이 이루어지게 된다. 현재 미국에서는 콘크리트 공사의 큰 현장에서 concrete 생산 품질관리를 행하고 있는 것으로 안다. 그러면 여하한 이론에 입각하여 현장에서 다량으로 concrete를 생산할때에 그 품질을 관리하느냐 하는 것을 현재 미국에서 propose 되여 있는 안과 ASTM에 규정되여 있는것을 중심으로 소개하고 아울러 concrete 공사에서 강도에 관한 시방을 앞으로 이끄러, 나갈 방향을 제시하고저 한다.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.4
• /
• pp.30-36
• /
• 1994

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.5
• /
• pp.433-442
• /
• 2014

The most design criteria and specifications in Korea utilized to ensure appropriate quality are based on process and prescriptive criteria determining materials, measure and methods. It has many problems including a loss of competitiveness resulting from inhibited creativity of the contractors. The performance-based specifications focused on final product are being proposed, but have difficulty in adapting to the architectural field. In this study the hybrid specification prototype for curtain wall construction was suggested. The specification framework was presented through analysis of linkage between the performance and prescriptive specification cases. Based on the survey with practitioners, the performance inspection process and the sample specification were developed by identifying the essential performance test timings. The applicability of the specification prototype was evaluated by interviews with experts. It was found that the prototype was active and a progressive supporting tool which could support to secure phased performance during construction as well as final performance.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.79-90
• /
• 2004

1.1 관련시방 옥내배선공사와 관련된 사항에 대해서는 이 장에서 제시된 것을 제외하고 접지공사에 대하여는 10-4(접지설비공사)의 해당 규정에 따른다. 1.2 참조규격 1.2.1 한국산업규격 KS C IEC 60364 건축전기설비 KS C IEC 60085 전기절연재료의 내열성 평가 KS C IEC 60167 고체 전기절연재료의 절연저항 (중략)

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3A
• /
• pp.513-521
• /
• 2006

Many studies have been conducted on the high tension bolt friction connection in the view of the field practice. Those effort, however, unfortunately have not been appropriately applied in the design specifications. Recently, particularly for steel bridges, rationalization of design takes greater attention from designers and hence, demand on rationalization of high tension connection becomes more significant. The purpose of this study is to suggest direction for the rationalization of high tension bolt connection and to also provide fundamental information for the improvement of the design specifications. In order to accomplish the purposes, the design specifications in Korea was analyzed and compared with other specification from abroad, and was studied one of the most important factors including slip coefficient, and the specifications on the size of bolt holes. The effect of over-sized bolt hole and the reduction of axial force on bolt was evaluated through the experimental studies on the slippage of the high tension bolt connections. Other research topics included herein includes the difference of slip coefficients, the effect of over-sized bolt holes and the gap distance of members, and the application of filler plate and corrosion protected bolts. From the research results, it is known that the specifications in Korea apply a constant slip coefficient with respect to the contacted surface conditions while various coefficients are available depending on the contacted surface conditions. Therefore, it is recommended that the specifications in Korea also develop and detail the slip coefficient which can appropriately take account of the variation of the contacted surface conditions. It is also suggested that the limitation abroad on the over-sized bolt hole may be applied for enhancing the effectiveness of construction.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.1
• /
• pp.175-180
• /
• 2010

Despite continuous efforts by the construction industry to achieve better quality, it doesn't seem that much has been improved. This is mainly because current specifications do not satisfy a change in the market environment, which is that a higher level of quality is now demanded by users. Quality improvement efforts have been satisfied merely to meet specifications. On the other hand, advanced countries have been experienced great success in their construction techniques and have reduced costs by introducing apay adjustment system to the construction industry, in which compensation is based on performance. Following their example, Koreashould introduce such a pay adjustment system in order to motivate the members of our construction industry to achieve better quality and a higher level of construction techniques. However, there has been a lack of a rational approach to the development of a system for cost coordination, as well as performance and quality inspection. Thus, in this study a legal and logical plan was developed that can be used to adjust the construction cost, along with the performance inspection of quality results, in order to introduce a pay adjustment system that is appropriate for domestic regulations.

• Magazine of the Korea Concrete Institute
• /
• v.14 no.4
• /
• pp.56-58
• /
• 2002

$\ulcorner$콘크리트표준시방서$\lrcorner$ 에서는 "서중 콘크리트로서 시공해야 할 시기를 일률적으로 정하기는 곤란하나, 하루평균 기온이 $25^{\circ}C$ 또는 최고온도가 3$0^{\circ}C$를 초과하는 시기에 시공할 경우에는 일반적으로 서중 콘크리트로서 시공할 수 있도록 준비해 두어야 한다."고 규정하고 있고, $\ulcorner$ACI 305R$\lrcorner$ 에서는 "서중(hot weather)은 수분 손실률과 시멘트 수화율의 가속에 의하여 굳지 않은 콘크리트(fresh concrete)와 굳은 콘크리트(hardened concrete)의 품질을 저하시키는 다음 조건들이 공존하는 상태이다."고 규정하고 있으며 그 조건들은 a. 높은 대기 온도 b. 높은 콘크리트 온도 c. 낮은 상대습도 d. 바람의 세기(풍속) 이다.(중략)

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.4
• /
• pp.343-350
• /
• 2022

The computerization project for underground facilities in Korea began in earnest after the city gas explosion in Seoul in 1994, and the Daegu subway explosion in 1995. As such a large-scale gas explosion accident caused enormous economic loss including human casualties and potential benefits, the need for computerized for efficient management of underground facilities was greatly emphasized in society. Meantime, computerization of underground facilities has been carried out according to the basic plan for building national geographic information system. In this study, problems were identified based on the current status of construction and management of underground facility information, as well as laws and regulations, and directions for establishing quality standards were presented. In addition, construction work standards such as 「Public Survey Work Regulations」, design standards, standard specifications, and technical specifications, gas technology standards, design standards, and communication works so that underground facility information can be linked and utilized in construction work by examining the linkage of the underground facilities, the targets that can be used for quality level information on underground facilities were derived, and a proposal to revise the construction standards was presented. In the future, if the quality standards are established, it is expected that the accuracy and utilization in the construction field will be increased.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.4
• /
• pp.67-79
• /
• 1991

Geomrtric nonlinearity of axially and laterally loaded reinforced concrete slender columns has been generally considered by use of second order analysis such as $P-{\Delta}$ method. Complex procedure in second order analysis may not be a difficult problem with computer aid, however it has been seldom used in design offices because of the need of carefully decided input data. In lieu of second order analyses, the Korean and the American concrete codes have adopted the moment magnifier method. It is known, however, that this method results in too conservative design in some cases. Accuracy of the moment magnifier method to the experimentally obtained data has been reviewed and an improved method has been proposed for better result.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.2
• /
• pp.59-66
• /
• 2001

구조물 내진설계의 개념은 기존요구조건이라는 조항으로 시방서에 규정되어 있으며 구조물이 지진발생시에 안전성과 경제성을 최대한 확보할 수 있으며 비선형시간 이력해석을 수행하여 자진시의 동적거동을 기술함으로써 확인할 수 있다. 내진설계에 보편적으로 적용하는 응답스펙트럼해석법은 선형해석법으로 구조물의 비선형동적거동의 영향을 거동계수로 반영하므로 파괴메카니즘 및 기본 요구조건의 만족여부를 거동계수를 구하는 과정으로 결정할 수 있다. 이 연구에서는 내진설계방식에 의해 설계된 약진지역에 의한 화학공장건물의 모델인 3차원 철골뼈대구조물을 선정하고 거동계수를 결정하는 과정을 수행하여 지진시의 동적거동을 확인하였다. 이 연구의 결과, 현 시방서의 응답스펙트럼해석법에 적용되는 거동계수는 강진지역의 구조물의 경우 기능성 및 안정성 한계를 제시하지만 약진지역 구조물의 경우는 실제 동적거동과 무관하다는것과 약진 지역에 위치한 구조물의 내진설계에는 시방서가 제시한 내진설계방식을 적용하는 것이 주요한 사항임을 확인하였다.